Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kessebohmer bottom mount waste pullout is a trash pull-out system designed for 15 inch and 18 inch base cabinets, so installers can plan this unit into common kitchen cabinet widths without reworking standard layouts. The product is a bottom mount trash pullout with a silver frame, so the system ties into modern cabinet hardware finishes while keeping the mechanism out of sight inside the cabinet. This model provides 2-28 quart white bins, giving users separated waste capacity inside one cabinet run for tasks such as trash and recycling. The frame size for the 28QT version is 12.25 inches wide by 22 inches deep by 10 inches high, which lets layouts account for interior clearance, door style, and surrounding hardware during design and installation. A load rating of 100 lbs supports typical household waste loads while helping the slide system operate smoothly under normal use.
This bottom mount trash pullout is designed for 15 inch and 18 inch base cabinets, so planners can align the unit with standard base cabinet widths in kitchen and bath layouts. The 28QT frame size of 12.25 inches wide by 22 inches deep by 10 inches high defines the footprint on the cabinet floor, helping installers position the frame accurately relative to face frames or frameless sides. Mounting as a bottom mount unit keeps the load on the cabinet floor, which is useful when side walls already carry drawer slides or other hardware. The product is supplied as a kit with a frame using soft-open and soft-close slides, which provides controlled motion of the waste pullout during everyday opening and closing.
This Kessebohmer USA Inc product sits in the kitchen and bath cabinet accessories category under trash pull-outs, so it is intended for cabinet-based waste management in built-in applications. Being designed for 15 inch and 18 inch base cabinets anchors it in standard kitchen base runs, letting designers allocate a dedicated waste cabinet without shifting from common carcass sizes. The 28QT frame footprint of 12.25 inches wide by 22 inches deep by 10 inches high fits within those cabinet widths while leaving space above for door and face frame construction. Because the unit is a bottom mount trash pullout, it suits installations where side walls must remain clear for shelving, roll-outs, or structural features. The 2-28 quart white bins give the cabinet bay two defined receptacles, which supports layouts that separate general trash and another waste stream within the same footprint.
The 28QT frame size of 12.25 inches wide by 22 inches deep by 10 inches high gives a fixed geometry that simplifies measuring for consistent placement across multiple cabinets on a job. As a bottom mount trash pullout, the frame references from the cabinet floor, which can speed layout when installers are working within both framed and frameless constructions using a common datum. The system carries a 100 lbs load rating, so slide performance is specified for typical household or light commercial waste loads, helping motion remain predictable over time when bins are filled within that range. Soft-open and soft-close slides integrated into the frame provide controlled start and end of travel, supporting smooth operation that feels consistent from cabinet to cabinet. The presence of 2-28 quart white bins means every install using this model delivers the same two-bin capacity, which helps designers and users understand waste volume expectations across matching kitchens.
The Kessebohmer bottom mount waste pullout is designed for 15 inch and 18 inch base cabinets, so it fits standard-width base cabinet layouts used in many kitchen and bath projects.
The 28QT frame size is 12.25 inches wide by 22 inches deep by 10 inches high, which defines the footprint and vertical clearance required inside the cabinet for proper placement.
The waste pullout has a 100 lbs load rating, so the slide system is specified to support typical waste loads without overstressing the mechanism under normal use.
This Kessebohmer unit uses 2-28 quart white bins, which provides two separate receptacles for organizing waste streams inside a single base cabinet opening.
The product is a bottom mount trash pullout, so the frame is secured to the cabinet floor, leaving the cabinet sides available for other hardware or storage elements.
The frame uses soft-open and soft-close slides, which give controlled, cushioned movement as the waste pullout is opened and returned during everyday use.
The Kessebohmer bottom mount waste pullout with 2-28 quart white bins and a silver frame gives cabinet professionals a defined waste solution tailored to 15 inch and 18 inch base cabinets. With a 28QT frame size of 12.25 inches wide by 22 inches deep by 10 inches high, the system provides clear planning dimensions for reliable fit. The 100 lbs load rating and soft-open, soft-close slides support predictable performance in daily use. For projects that need a cabinet-based trash pull-out with two 28 quart bins and bottom mount installation, this BOMWP228SV-WH unit aligns with that requirement.
Sold In: 1 Kit
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  KE2507919010 Mfr# 2507919010 | Kessebohmer White Trash Bins Lids, -2507919010 |