Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bottom mount trash pullout Kessebohmer 12-1/4 inch Champagne Bottom Mount Waste Pullout with 2-28 quart Champagne Bins Self-Open/Soft-Close, BOMWP228CP-CP is a dedicated trash solution for base cabinets. It is in the Bottom Mount Trash Pullouts class, so it installs on the cabinet floor instead of the side walls, which keeps the sides free for other hardware. The unit is designed for 15 inch and 18 inch base cabinets, so it targets the most common kitchen cabinet widths and simplifies layout planning across a run of cabinets. The Champagne finish on the frame and bins delivers a consistent look, which matters when tying this trash pull-out into a coordinated interior hardware scheme. Its 28 quart bin sizing fits typical residential waste volume, so everyday kitchen trash can be contained inside the cabinet instead of sitting in a freestanding can.
This Kessebohmer USA Inc unit is engineered for 15 inch and 18 inch base cabinets, so its 12.25 inch wide 28 quart frame is sized to sit on the cabinet bottom with clearance for side walls and door hardware. The bottom mount design places the frame directly on the cabinet floor, which simplifies layout because the mounting surface is flat and continuous across most cabinet constructions. With a 22 inch depth, the frame reaches into standard base cabinet carcasses, helping the bins slide fully out for access while still remaining within typical cabinet interior dimensions. The 10 inch frame height is compact enough to work behind many standard full-height doors, so the bins can ride low in the cabinet and leave room above for additional storage or plumbing depending on location.
This bottom mount trash pullout is designed specifically for 15 inch and 18 inch base cabinets, so it fits well in standard kitchen runs where one cabinet is reserved for waste. Its 12.25 inch wide 28 quart frame size means it can be used in a 15 inch base cabinet and still leave side clearances expected by many cabinet lines, making it a targeted solution when cabinet widths are fixed. The 22 inch depth works inside typical full-depth kitchen bases, supporting installations in sink cabinets or standalone bases that share similar interior dimensions. With two 28 quart Champagne bins, the pullout organizes trash and recyclables side by side inside the cabinet footprint, which keeps waste centralized near prep or sink areas without occupying floor space.
The self-open/soft-close function described in the SAP and Web descriptions gives this Kessebohmer BOMWP228CP-CP unit controlled slide motion, which improves how the pull-out behaves during everyday use in a busy kitchen. The soft-open aspect means the frame with bins begins movement smoothly, which reduces shock loads on the 100 lbs rated slides when the cabinet door and pull-out are operated together. The soft-close behavior slows and seats the frame at the end of travel, which keeps the two 28 quart bins from slamming into the cabinet front and helps maintain alignment over repeated cycles. A 100 lbs load rating supports the weight of the metal frame, slides, and two filled Champagne bins, so the pull-out can extend fully while staying within the design limits of the slide system. As part of the Bottom Mount Trash Pullouts product class under Kitchen & Bath Cabinet Accessories, this configuration is focused on floor-mounted installation, which gives installers a predictable reference surface across different cabinet brands for consistent placement from job to job.
The Kessebohmer BOMWP228CP-CP waste pullout is designed for 15 inch and 18 inch base cabinets, so it targets standard kitchen cabinet sizes used for trash locations.
The 28 quart frame size is 12.25 inches wide, which positions the system to fit inside 15 inch base cabinets while providing clearance to cabinet sides and door hinges.
The Kessebohmer BOMWP228CP-CP frame depth is 22 inches, so the pull-out uses the interior length of standard base cabinets for better access to the Champagne bins.
The 28 quart frame height is 10 inches, which keeps the system low in the cabinet to clear common door openings and leave potential space above.
The Kessebohmer bottom mount trash pullout has a 100 lbs load rating, supporting the frame and two 28 quart Champagne bins when extended.
The self-open/soft-close slides on the BOMWP228CP-CP manage opening and closing so the frame and bins move smoothly, helping reduce impact on the cabinet.
The Kessebohmer BOMWP228CP-CP bottom mount trash pullout with two 28 quart Champagne bins, 12.25 inch wide frame, and 100 lbs rated self-open/soft-close slides is purpose-built for 15 inch and 18 inch base cabinets. Its 22 inch depth and 10 inch frame height match common cabinet interiors, so the system integrates into kitchen layouts where an in-cabinet waste center is planned. For projects that call for a dedicated, floor-mounted trash pullout within standard base sizes, this configuration offers defined dimensions and motion characteristics that support predictable cabinet design and installation.
Sold In: 1 Kit
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  KE2507910103 Mfr# 2507910103 | Kessebohmer Champagne Trash Bins Lids, -2507910103 |