Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 24 inch side-mount ball bearing drawer slide from Fulterer, rated 198 lb per pair, with over-travel that carries the drawer 1 inch past full extension and an integrated soft-close damper that settles it shut quietly. The zinc finish blends into cabinet interiors and holds up through years of daily cycling.
A 24 inch slide in a kitchen or shop cabinet often sits under a countertop overhang or behind a face frame thick enough to shorten how far the drawer opens. The 1 inch over-travel on this slide pushes the drawer past full extension so the contents at the back are actually reachable — not just technically accessible. Once released, the soft-close damper takes over on the way back in, catching the drawer before it slams and guiding it to a controlled close. On a heavily loaded drawer, that damped close matters as much as the over-travel; the weight that makes a drawer hard to reach also makes it hard to close quietly.
The slide members are cold-formed steel with a zinc plated finish. Zinc is the working standard for side-mount ball bearing slides in this segment: it protects the steel through the opening and closing cycles of an indoor install without adding visual bulk. This is not a decorative finish — the slide sits beside the drawer box and is mostly hidden in use — but it is a durable one. For outdoor, marine, or washdown environments, a stainless option is the right call; this slide is engineered for dry indoor service.
The combination of a 198 lb capacity, over-travel, and soft-close makes this slide a natural fit for demanding residential and light commercial installs: base cabinet drawers loaded with tools or hardware, kitchen drawers under stone countertop overhangs, pantry pull-outs where a slam-free close matters, and shop or utility cabinet drawers that carry real weight day after day. Because the slide is non-handed and sized to the standard 1/2 inch clearance per side, it drops into a typical side-mount drawer box without special preparation. Build the box 1 inch narrower than the cabinet opening and the clearance is set. In face-frame cabinets, rear mounting brackets are required to support the back of the slide; those brackets are series-specific and sold separately.
No. 24 inches is the closed length of the slide. Because this is an over-travel model, the drawer member actually extends 1 inch past that — so travel slightly exceeds the nominal slide length. Slide length and drawer travel are two separate specs.
A damper. The integrated soft-close mechanism slows the drawer over the last portion of its closing travel for a quiet, controlled close. This is true soft-close, not a self-close spring that can still slam under load.
Yes, but the back of the slide needs support. Face-frame cabinets set the cabinet side back from the frame opening, so rear mounting brackets are required. Brackets are series-specific and sold separately — confirm the correct bracket for this Fulterer series before ordering.
No. The slide is non-handed, so both pieces in the pair are identical. Order by quantity, not by handedness.
Per pair. That is the working load for one drawer running on two slides, which is how load ratings are stated for side-mount ball bearing slides in this category.
At 198 lb capacity with over-travel and a true soft-close damper, this Fulterer zinc slide handles the drawers a standard 100 lb cabinet slide cannot — and closes them like a premium install every time.
Sold In: 1 Pair
