Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 26 inch side-mount ball bearing drawer slide from Fulterer's soft-close line, rated 198 lb per pair, with over-travel action that carries the drawer 1 inch past full extension and a built-in damper that closes it quietly. The zinc finish blends with standard cabinet interiors and holds up through years of daily indoor use.
The combination of a 198 lb rating and 1 inch of over-travel makes this slide useful in situations where a standard 100 lb cabinet slide falls short on two fronts at once. Deep pots-and-pans drawers, loaded shop drawers, and utility pull-outs under a countertop overhang are the natural fits. The over-travel matters most when the back of the drawer would otherwise stay hidden behind the face frame or overhang at full open — that extra inch is the difference between reaching the contents and digging for them. The soft-close damper adds value anywhere drawer slam is a concern, including kitchens, showrooms, and cabinetry in shared work spaces.
The slide is built from steel members with a zinc finish — the same corrosion-resistant plating used across the side-mount ball bearing category for indoor service. Zinc is a functional finish, not a decorative one; it protects the steel through repeated cycles in a dry environment. It is not a stainless or painted finish, and it is not rated for wet, outdoor, or washdown environments. The zinc tone pairs cleanly with white or almond cabinet interiors without drawing attention to the hardware.
This slide suits face-frame and frameless cabinets. Build the drawer box 1 inch narrower than the cabinet opening to leave the required 1/2 inch of side clearance for each slide. In face-frame construction, the slide needs rear support at the back of the cabinet — add matching rear mounting brackets, sold separately, and confirm they are specified for this series. The slide is non-handed, so both pieces in a pair are identical and fit either side without modification. Order one pair per drawer.
The slide is 26 inches long when closed. Because it is an over-travel design, the drawer member travels the full slide length plus 1 additional inch — so the drawer clears the cabinet face and pushes past it. Slide length and drawer travel are two different numbers.
It is a damper. The slide catches the drawer in the last portion of travel and slows it to a controlled, silent close. It is not a self-close spring, which would pull the drawer shut without damping.
Per pair. That is the combined working capacity for the two slides installed in one drawer.
No. The slide is non-handed — both pieces in a pair are identical and fit either side of the drawer without modification.
Yes, but the back of the slide needs support. In face-frame construction, add rear mounting brackets designed for this series. The brackets are sold separately.
When the drawer is deep, the load is heavy, and a countertop overhang is blocking full access, this 26 inch Fulterer over-travel soft-close slide handles all three problems in one package — rated capacity well above the standard class, an extra inch of travel past full extension, and quiet damped closing on every cycle.
Sold In: 1 Pair
