Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
American Veneer Cherry Edgebanding Preglued is a 7/8 inch width cherry wood edge banding from Cedan Inc designed to finish exposed edges on woodworking projects. The American veneer cherry surface provides a real-wood edge that visually matches cherry-faced panels, so cabinet boxes, shelving, or furniture work present a consistent cherry appearance along both faces and edges. The 7/8 inch width gives coverage for common panel thicknesses while allowing a small trim margin, which helps installers flush-trim cleanly without exposing core material. Because this product is classified as edge banding, it is intended specifically for treating raw edges rather than broad surfaces, which keeps your workflow focused on edge detail work. The preglued construction builds adhesive into the banding itself, so once activated during installation, the bond forms directly under the veneer, supporting a neat, professional-looking cherry edge line.
This American Veneer Cherry Edgebanding Preglued in 7/8 inch width is sized to cover standard panel edges with extra margin, so the banding can be applied along the edge and then trimmed back flush on both faces. The cherry veneer faces outward to create the final edge, while the pre-applied adhesive is positioned on the back side, ready for activation during installation. As edge banding, it is meant to be aligned along the length of exposed edges, so once bonded and trimmed, the cherry face aligns with the panel faces for a continuous look. The defined 7/8 inch width and dedicated edge banding design together support repeatable setups, since installers can expect the same coverage and trim margin on every length from this AECHER78PG part.
The American Veneer Cherry Edgebanding Preglued 7/8 inch Width from Cedan Inc fits naturally into projects built with cherry or cherry-faced sheet goods, because the cherry veneer edge visually continues the look of the main surfaces. In cabinet runs, this edge banding can be applied to vertical stiles, horizontal rails, and shelf fronts so all exposed edges present the same cherry appearance as doors or face panels. On casework or furniture, the 7/8 inch width banding suits typical panel thicknesses, so it can cover both sides of the core edge with some overhang for trimming. Since it is part of the wood edgebanding and surfacing category, it aligns especially well with woodworking environments where cherry is a chosen species for visible components.
The Cedan Inc American Veneer Cherry Edgebanding Preglued uses a defined 7/8 inch width and a consistent cherry veneer surface, which means installers can set up trimming and finishing steps around known dimensions and appearance. The preglued format places the adhesive as part of the banding, so the bonding step happens directly under the cherry veneer, helping the edge stay tight along the substrate after activation. With the AECHER78PG manufacturer part number and American veneer cherry description, shops can specify the same edge material whenever a repeat finish is needed, reducing mismatch between production runs. Because this product is classified as edge banding rather than a general surfacing sheet, it focuses on linear edge treatment, which simplifies planning for edge-only finishing passes on cabinets, shelving, or furniture panels.
American Veneer Cherry Edgebanding Preglued is used to cover exposed panel edges with a cherry veneer face, so cabinet and furniture edges visually match cherry-faced surfaces.
The AECHER78PG American Veneer Cherry Edgebanding Preglued has a 7/8 inch width, giving coverage for typical panel edges plus extra margin for flush trimming.
The preglued cherry edge banding has adhesive already on the back, so during application the adhesive is activated and bonds the cherry veneer band directly to the edge.
Cedan Inc American veneer cherry edgebanding provides a cherry wood edge surface that visually ties in with cherry panels, supporting a unified finish on cabinets and furniture.
The 7/8 inch width extends past both faces of common panel thicknesses, allowing trimming back to a flush, clean cherry edge without exposing the core.
The AECHER78PG part number identifies this specific 7/8 inch American Veneer Cherry Edgebanding Preglued, helping shops reorder the same cherry edge material consistently.
The American Veneer Cherry Edgebanding Preglued 7/8 inch Width from Cedan Inc gives projects a defined cherry veneer edge that aligns with cherry-faced components. The 7/8 inch width and pre-applied adhesive support straightforward edge treatment and trimming on cabinet, shelving, or furniture work. With the AECHER78PG part number and clear American veneer cherry identity, this edge banding can be specified whenever a matching cherry edge finish is required across multiple jobs.
Sold In: 1 Roll