American Veneer Cherry Edgebanding Preglued describes a wood edge banding made with American veneer cherry, so you get a real wood look along cabinet and furniture edges where exposed core would otherwise show. The 13/16 inch width stated in the description gives enough coverage for typical 3/4 inch panels with a bit of overhang, which supports clean trimming and a consistent finished line. The product class listed as edge banding defines it as a finishing strip for raw edges, helping create a unified appearance with cherry-faced panels. The preglued designation means adhesive is already applied to the back of the edgebanding, which streamlines installation steps compared to raw back edgebanding. The web and SAP descriptions both call out cherry, tying the color and grain character to cherry projects so edges visually coordinate with cherry veneer or cherry solid wood components in the same job.
The stated 13/16 inch width on this Cedan American veneer cherry edgebanding provides working room beyond a 3/4 inch panel edge, so installers can apply the strip, then trim and sand back to a flush, straight line. Because it is identified as preglued, the adhesive is already on the back of the band, which allows heat-based activation instead of separate liquid glue steps. That pre-applied adhesive streamlines edging sequences on cabinet runs or shelving, helping keep edge work predictable from one panel to the next. The designation as edge banding in the product class confirms its role specifically for finishing exposed panel edges, so it fits directly into standard cabinet and casework workflows that rely on veneer-faced sheet goods.
The American Veneer Cherry Edgebanding Preglued 13/16 inch Width description ties this strip to projects using cherry-faced materials, so it serves naturally on cabinet sides, face edges of shelves, and furniture panels built around cherry tones. The wood category listing as edgebanding, wood places it in the wood edgebanding family, which makes it suitable wherever a cherry veneer face is needed to carry the appearance around panel edges. Its 13/16 inch width gives adequate coverage on common 3/4 inch carcass and door components, letting installers address slight panel thickness variations while still trimming back to a crisp edge. The manufacturer part number AECHER1316PG uniquely identifies this specific cherry, preglued, 13/16 inch variant, helping shops call out the same material again for repeat work or repairs that must visually align with earlier installations.
The term preglued in the SAP description 13/16 cherry preglued edgeband indicates that the adhesive layer is already factory-applied, which keeps glue spread thickness consistent along the full length of the strip. That consistency helps edges bond uniformly when activated, reducing areas of weak adhesion that could lead to edge failures. Because the web description repeats American Veneer Cherry Edgebanding Preglued 13/16 Width, it reinforces that both the veneer species and the adhesive format are fixed attributes, so every length of this Cedan Inc band behaves the same from job to job. The edge banding and edgebanding, wood categorizations show its role within surfacing materials, integrating smoothly into established cabinet and millwork processes where wood veneer edging is part of the normal construction sequence.
The product is described as American veneer cherry edgebanding, meaning it uses a cherry wood veneer face to give panel edges a matching cherry appearance in cabinet and furniture work.
The American Veneer Cherry Edgebanding Preglued 13/16 inch Width is specified at 13/16 inch wide, providing coverage for standard 3/4 inch panels with room for trimming to a flush finished edge.
The term preglued in the 13/16 cherry preglued edgeband description indicates adhesive is factory-applied to the back, so the strip is supplied ready for heat-activation during edging.
This edge banding is categorized as edgebanding, wood and edge banding, so it is used to finish exposed edges on cherry-faced cabinets, shelves, and furniture panels for a unified cherry look.
The brand is listed as Cedan Inc, giving shops a specific manufacturer reference when they want consistent American veneer cherry edgebanding across multiple projects.
The manufacturer part number AECHER1316PG identifies this exact American Veneer Cherry Edgebanding Preglued 13/16 inch Width variant, helping buyers request the same cherry preglued strip repeatedly.
The American Veneer Cherry Edgebanding Preglued 13/16 inch Width from Cedan Inc combines a cherry veneer face with a pre-applied adhesive layer, so edges visually match cherry projects while installation steps stay straightforward. Its 13/16 inch width is sized for typical 3/4 inch panels, giving enough coverage to trim cleanly and leave a straight, finished line around cabinet or furniture components. With its classification as edge banding and edgebanding, wood, it slots directly into woodworking setups that rely on veneer-faced sheet goods and need a cherry solution for exposed edges. Select this AECHER1316PG edgebanding when a consistent American veneer cherry appearance and a preglued format are important on your next run.
Sold In: 1 Roll