Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
American Veneer Cherry Edgebanding Preglued gives cabinet and furniture projects a cherry wood edge treatment, so exposed panel edges match cherry surfaces for a unified appearance on visible runs. The cherry veneer construction creates a real-wood look along edges, which matters when tying shelf or cabinet faces into cherry doors and frames on built-ins or casework. The product serves as edge banding, so it finishes cut panel edges where the core would otherwise show, improving the finished look of plywood or similar substrates around work areas. The 5/8 inch width targets common panel thickness relationships, which helps installers cover the edge while controlling overhang for trimming passes. As a preglued option, the adhesive is already applied to the back of the banding, so installers heat-activate it in a single pass instead of spreading separate glue along every edge.
The 5/8 inch width on this American Veneer Cherry Edgebanding Preglued covers typical panel thickness relationships, so edges receive full cherry coverage across the core. That width leaves a modest margin above and below the face, giving room for flush trimming without excessive waste. As a preglued edge banding, the adhesive is already on the underside, so installers heat-activate it along the edge in one motion. This simplifies the workflow by combining placement and bonding into a straightforward sequence along cabinet sides, shelves, or similar components.
American Veneer Cherry Edgebanding Preglued serves projects where a cherry wood edge is needed along exposed panel sides, such as casework, shelving, or cabinetry. The cherry veneer construction ties edge appearance into other cherry veneered or solid fronts, which can help visually connect edge details around a run of cabinets or furniture pieces. Its role as edge banding means it finishes raw panel edges where the core would otherwise show, so workpieces move from shop to installation with a more complete presentation. The 5/8 inch width fits edge runs where that dimension provides the right coverage balance between panel thickness and trimming allowance.
The preglued design of this Cedan Inc American veneer cherry edgebanding places adhesive on the back from the factory, which supports repeatable bonding by relying on a consistent glue layer along each length. Installers heat-activate that adhesive while pressing the 5/8 inch wide band against the edge, so each pass follows the same routine on multiple parts. The defined 5/8 inch width helps set expectations for trimming behavior, since each edge receives similar overhang and responds predictably to guided trimmers or sanding blocks. The AECHER158PG part number identifies this specific cherry preglued variant, which matters when matching existing edges or ordering the same material for follow-up work, because it ties color and construction back to the same Cedan product line.
AECHER158PG is American Veneer Cherry Edgebanding Preglued from Cedan Inc, so it functions as cherry wood edge banding for finishing exposed panel edges.
The American Veneer Cherry Edgebanding Preglued has a 5/8 inch width, providing coverage over the panel edge while leaving a small margin for trimming to a flush finish.
The preglued cherry edgebanding carries adhesive on the back from the factory, so installers use heat to activate the bond instead of applying separate edge glue.
This cherry edgebanding is applied to exposed panel edges on cabinets, shelves, and similar casework, so the edges visually match cherry-faced surfaces on the project.
This American Veneer Cherry Edgebanding Preglued is produced by Cedan Inc, giving the product a defined source and part number for repeat use.
The 5/8 inch width gives enough overhang for trimming tools to flush the edgeband to the panel surface, helping achieve consistent edges along runs.
The American Veneer Cherry Edgebanding Preglued 5/8 inch Width from Cedan Inc pairs cherry veneer appearance with a defined width and pre-applied adhesive, so edge finishing fits into a straightforward workflow. The AECHER158PG identifier ties future orders back to the same cherry preglued edgeband, supporting visual continuity across ongoing cabinetry or furniture projects.
Sold In: 1 Roll