Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep ProFoam sanding disc is a 5 inch diameter abrasive disc that uses aluminum oxide grain in a very fine 280-320 grit range, so it targets light material removal and surface refinement where controlled cutting and smooth finishes matter on the job. The disc has a 1/2 inch profile identified as PROFOAM, which gives a foam-backed structure that supports the abrasive during contour work and helps maintain consistent contact on uneven areas. This disc is classified by SurfPrep as a very fine option, which positions it for tasks such as final sanding steps, blending, or preparing surfaces where a tighter scratch pattern is required before moving to finishing processes. As part of SurfPrep abrasive discs, it fits into sanding workflows that call for consistent grading and predictable cut when switching between different grit ranges.
The SurfPrep ProFoam 5 inch x 1/2 inch very fine disc uses a PF DISC 1/2 H&L VFINE 280-320 format, which identifies it as a hook and loop based sanding disc that relies on a matching hook and loop backing pad for attachment, giving quick disc changes during multi-step sanding sequences. The 5 inch size combined with the ProFoam profile supports use on tools designed for 5 inch discs, helping align disc edge coverage with typical pad diameters. The very fine 280-320 grit grading positions this disc near the final stages of a sanding sequence, so it can follow coarser SurfPrep or other abrasive discs to tighten the scratch pattern. Being described as very fine with aluminum oxide grain also helps installers and fabricators place this disc in workflows where a smoother, prep-ready surface is required before later finishing operations.
The SurfPrep ProFoam 5 inch x 1/2 inch very fine disc fits tasks that call for controlled surface refinement rather than rapid stock removal, because its 280-320 grit aluminum oxide abrasive focuses on producing a tight, fine scratch pattern. The very fine grading makes it a match for stages where an installer or shop is dialing in surface quality, such as smoothing after intermediate grits or blending minor transitions so they do not telegraph through subsequent finishing work. The 1/2 inch ProFoam profile signals a foam-backed structure, which supports use on slightly contoured surfaces by helping distribute pressure more evenly across the disc face. This can be especially useful when sanding areas with minor profiles, routed edges, or transitions where flat paper-backed discs can concentrate pressure and leave uneven marks. Within the Abrasive Discs category from Wurth Baer Supply, this SurfPrep disc aligns with workflows in woodworking and similar trades that depend on consistent grit grading, so users can predict how this very fine step will affect surface readiness compared with their coarser sanding stages.
The aluminum oxide grain on the SurfPrep ProFoam sanding disc shapes how it cuts, offering a defined scratch that helps installers read the surface as they progress toward finish-ready conditions. Because the disc is specifically identified as very fine 280-320 grit, users can position it reliably within their grit sequence, stepping down from coarser SurfPrep or other abrasive discs to refine the scratch without jumping too far between grits. The 5 inch disc size works with common 5 inch hook and loop pads, and when combined with the ProFoam profile, the disc helps maintain contact at the outer edges of the pad, which is important when tracking along edges or narrow components. The PF DISC 1/2 H&L VFINE 280-320 designation also aids in reordering and process documentation, since the part number SP5DPFHDVF-10 ties directly to this specific disc configuration. In day-to-day shop use, this clarity around size, grit, and structure supports more repeatable sanding results, because teams can specify this exact SurfPrep disc when they need a predictable very fine step that matches previous projects.
The SurfPrep ProFoam sanding disc uses aluminum oxide grain, which shapes the cut and scratch pattern so sanding results stay consistent across the 280-320 very fine grit range.
The disc is classified as very fine 280-320 grit, placing it near the final stages of sanding where surface refinement and a tight scratch pattern are important.
The 5 inch x 1/2 inch sizing indicates a 5 inch disc diameter with a 1/2 inch ProFoam profile, supporting use on 5 inch pads while adding foam-backed conformability.
The ProFoam 1/2 profile gives the disc a foam-backed body that can better follow slight contours, helping distribute pressure and reduce isolated scratch marks.
The PF DISC 1/2 H&L VFINE 280-320 description identifies a ProFoam 1/2 inch hook and loop very fine 280-320 grit disc, which helps place it within a hook and loop sanding system.
The SP5DPFHDVF-10 manufacturer part number uniquely ties to this SurfPrep ProFoam 5 inch x 1/2 inch very fine disc, simplifying reordering and standardizing sanding steps.
The SurfPrep ProFoam 5 inch x 1/2 inch very fine 280-320 grit aluminum oxide sanding disc provides a defined role in fine sanding stages, giving installers and shops a clearly identified SurfPrep abrasive disc for surface refinement. Its combination of 5 inch diameter, ProFoam profile, and very fine aluminum oxide grain aligns with workflows that need predictable finishing steps before coating or other downstream processes. Ordering this disc from Wurth Baer Supply using part number SP5DPFHDVF-10 ties your sanding process to a specific, repeatable abrasive choice that fits within established Abrasive Discs selections.
Sold In: 10 Each