SurfPrep 5 inch ProFoam sanding disc gives you a 5 inch diameter, 1/2 inch thick foam disc designed for sanding surfaces that demand soft flexibility. The medium 120-150 grit aluminum oxide abrasive cuts the surface while the foam body rides over profiles, which supports sanding without cutting or burning through lines or finishes on detailed parts. The no hole design creates a continuous abrasive face, which keeps contact even on narrow profiles. The hook and loop backing matches common hook and loop backup pads, which speeds disc changes between grits or operations on the same tool. Cabinet makers use this disc when sanding or polishing the joint location of molding on a miter door, because the foam body follows the joint contour while the medium 120-150 grit refines the surface for consistent appearance across the assembled door.
This ProFoam disc uses a hook and loop backing, which lets the disc attach to hook and loop backing pads in a straightforward press-on, peel-off motion that supports quick tool turnaround. The 5 inch diameter aligns with 5 inch hook and loop pads, which keeps the sanding area predictable across different operations in the same shop. The 1/2 inch foam layer between the backing and the aluminum oxide face creates a cushioned interface, which helps the disc conform to profiles on molding and mitered joints without transferring rigid pad marks to the work surface. The no hole design means there are no pad alignment steps related to hole patterns, which simplifies mounting when swapping discs focused on profile and joint sanding work.
This SurfPrep 5 inch ProFoam sanding disc is described as an excellent choice for preparing any surface that requires soft flexibility, which makes it useful where flat paper discs tend to cut through instead of following shape. The 1/2 inch foam is suited to riding over profiles, which is valuable on shaped cabinet components, decorative molding, and contoured details that form part of a finished assembly. Cabinet makers use this disc when they have challenges sanding or polishing the joint location of molding on a miter door, which means it plays a role specifically at the transition where two profiled pieces meet. The medium 120-150 grit abrasive is appropriate for that joint preparation, because it smooths the transition without aggressively reshaping the molded lines that define the door style.
The ProFoam construction combines a foam body with aluminum oxide abrasive in a 5 inch x 1/2 inch format, which creates a flexible sanding face that repeatedly follows the same profile across multiple doors in a run. The foam allows the disc to ride over profiles so as not to cut or burn through lines or finishes, which reduces the risk of exposing substrate or flattening design details during touch-up passes. The medium 120-150 grit range offers predictable surface refinement each time it passes over a molding joint, which helps cabinet makers achieve similar sheen and scratch patterns from door to door before finishing. The hook and loop attachment lets the same backing pad host multiple ProFoam discs as they wear, which supports consistent contact and handling from one replacement to the next during cabinet production or refinishing work.
This SurfPrep ProFoam disc is 5 inches in diameter and 1/2 inch thick, which matches typical 5 inch hook and loop tool pads while providing a cushioned sanding interface.
This medium ProFoam disc is specified at 120-150 grit, which provides a balance between material removal and surface refinement on cabinet joints and profiles.
The hook and loop backing lets the disc attach to hook and loop pads, which makes changing discs during cabinet sanding or polishing tasks a quick, tool-side step.
The no hole design keeps the abrasive face continuous, which maintains contact on narrow moldings and shaped profiles that benefit from uninterrupted sanding coverage.
This ProFoam disc is a great choice for cabinet makers sanding or polishing the joint location of molding on a miter door, where soft flexibility over profiles is important.
This disc uses aluminum oxide as the abrasive, which supplies the cutting action in the specified 120-150 grit range during cabinet and molding preparation work.
The SurfPrep 5 inch ProFoam sanding disc in medium 120-150 grit brings a flexible 5 inch x 1/2 inch foam format to cabinet and molding work, which is useful when profiles and miter joints need sanding or polishing without cutting through lines or finishes. The no hole aluminum oxide face and hook and loop backing support consistent contact and straightforward disc swaps, which suits production runs and focused repair or refinement work on miter doors. For shops that prepare molded joints and detailed cabinet parts, this ProFoam disc offers a format aimed at riding over profiles while refining the surface for finishing.
Sold In: 10 Each