Edgebanding, PVC Kensington Maple 1mm Thick, 15/16" Width x 100'

PVC Kensington Maple Edgebanding For Clean Panel Edges

PVC Kensington Maple edgebanding is a 1mm thick PVC edge banding that covers exposed panel edges so cabinet and furniture runs finish with a consistent Kensington Maple appearance. The 15/16 inch width gives coverage over typical 3/4 inch panels, supporting a light overhang that trims back to a straight, finished line. The 100 foot length keeps longer production or multiple small jobs on one roll, helping reduce changeouts during runs. PVC construction provides a stable edging material along straight cabinet sides or shelving rows. The Kensington Maple tone aligns with projects calling for this specific color name, helping keep door and casework edges visually coordinated. At 1mm thickness, the banding creates a defined edge profile that sands and finishes as part of the overall panel, so seams sit visually tight along the full cabinet or fixture edge.

Key PVC Kensington Maple Edgebanding Details That Matter

• The 1mm thick PVC material builds a solid edge profile that blends into the panel face, which supports a sturdy feeling edge along doors, drawer fronts, and casework sides.
• The 15/16 inch width gives coverage for standard 3/4 inch panels plus overhang, which allows trimming back to a clean line without exposing the core substrate.
• The Kensington Maple color identification keeps the edge visually aligned to matching Kensington Maple surfaces, which helps maintain a unified look across panels in the same project.
• The 100 foot roll length supports multiple cabinets or a small run of parts from one roll, which helps maintain color continuity from piece to piece on the same job.
• The PVC edge banding construction is designed as surfacing for woodworking applications, which fits typical shop workflows for casework, fixtures, and built-ins using this color.

Installation Fit For 1mm 15/16 Inch PVC Edge Banding

This PVC Kensington Maple edgebanding is 1mm thick, giving enough material for standard trimming and flush-routing operations while keeping edges proportional on 3/4 inch panels. The 15/16 inch width covers the face of typical casework substrates with margin left for trimming, helping installers cut back to a clean reveal without chasing bare core. The 100 foot length supports feeding through standard edge banding processes across multiple panels in sequence, keeping color and thickness consistent along a run. Because it is classified as PVC edge banding, it aligns with equipment and techniques commonly set up for PVC edging in woodworking shops, supporting repeatable installation results on cabinet and furniture components.

Using Kensington Maple Edge Banding In Real Projects

Where This Kensington Maple Edge Banding Fits Best

This Rehau, Inc. PVC Kensington Maple 1mm thick, 15/16 inch width x 100 foot edge banding fits projects that specify Kensington Maple as a defined color across cabinet or furniture elements. The 15/16 inch width works with standard 3/4 inch panels used in casework, shelving, and similar assemblies, giving margin for trimming while still following panel edges accurately. The 100 foot roll format fits small production runs, residential cabinet jobs, or commercial millwork where repeat use of the same edge profile and color is required. As a PVC edge banding in the Edgebanding & Surfacing category, it fits into workflows that already use PVC surfacing products, supporting consistent material behavior along edges and faces that share the same visual scheme.

Why These Dimensions Support Consistent Results

The 1mm thickness of this Kensington Maple PVC edgebanding creates an edge that is substantial enough to route and flush-trim without tearing through, supporting smooth transitions from panel face to edge. The 15/16 inch width is sized to overhang a 3/4 inch panel, letting installers align the banding by eye and trim back for a straight, uniform reveal along the cabinet run. With 100 feet on a roll, the same material can be applied across many parts, reducing lot-to-lot variation in color tone or thickness during a project. The defined Kensington Maple designation gives a named reference point when matching other Kensington Maple components in a design, so doors, drawer fronts, and cases share a coordinated edge appearance using this Rehau, Inc. edge banding.

Common Questions About This Kensington Maple Edgebanding

Select Kensington Maple Edge Banding For Consistent Runs

This Rehau, Inc. PVC Kensington Maple 1mm thick, 15/16 inch width x 100 foot edge banding provides a defined color, a clear size format, and a practical roll length for cabinet and furniture work. The combination of 1mm thickness and 15/16 inch width supports clean trimming on standard 3/4 inch substrates while maintaining edge coverage. For projects calling out Kensington Maple across panels and fronts, this PVC Kensington Maple edgebanding from Wurth Baer Supply aligns identity, size, and color so panel edges match the rest of the build.