Omega National Maple 2-1/2" x 10" x 60" Floating Shelf, FS0160MUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0160MUF1 to RSFS0160MUF1.

Omega National Maple Floating Shelf For Clean Storage

Omega National Maple floating shelf is a 2-1/2 inch thick, 10 inch deep, 60 inch wide wall-mounted shelf designed for todays transitional and contemporary kitchen and bath styling, so it supports open-wall layouts without visible support hardware. The solid wood and wood veneer construction in maple provides a stable shelf body that holds its shape in typical residential cabinet and closet environments. The shelf can be trimmed from 10 inch down to 2 inch depth, which lets you size it to shallow or full-depth wall runs while staying on one part number. The hanging system safely supports 15 lb per running foot of shelf length, giving a 60 inch run capacity matched to typical dishware, decor, or bath storage loads. Omega National Products manufacturing in the USA provides consistent dimensions that matter when lining up multiple shelves on a wall.

Job-Focused Details That Support Wall Layouts

• The 60 inch width gives long, continuous storage space across a wall section, reducing joint lines when you want a single span in a kitchen or bath run.
• The 2-1/2 inch thick profile creates a substantial front edge, hiding the hanging system and helping the shelf visually match other full-face cabinetry components.
• The 10 inch standard depth works for typical dinnerware and bath items, so the shelf projects far enough for function while staying practical above counters or fixtures.
• The ability to trim the shelf down to 2 inch depth lets you fit narrow wall areas or create stepped shelf layouts without changing product families.
• The hanging system rating of 15 lb per running foot of shelf length provides a clear load reference when planning what to store along a 60 inch span.
• The maple solid wood and wood veneer build gives a uniform surface for finishing, which supports stain or clear finishes within maple cabinet or millwork programs.

Floating Shelf Mounting And Sizing Considerations

This floating shelf uses a hanging system with brackets and mounting hardware, so the load is carried back into the wall instead of by external supports. The bracket-based system leaves the shelf visually clean, which fits contemporary kitchen and bath styling where open shelves replace some wall cabinets. The 60 inch width sets the wall span you can cover with one shelf, while the 10 inch depth and trimmable-down-to-2-inch design let you match the projection to backsplash, window, or fixture locations. With a 15 lb per running foot load rating, each 60 inch shelf segment has a defined working capacity that can be planned around when laying out dish, glass, or towel storage.

Using This Floating Shelf In Real Projects

Where This 60 x 10 Maple Shelf Fits Best

This FS0160MUF1 shelf fits kitchens and baths that call for transitional or contemporary styling, because the concealed floating design removes visible brackets from the wall line. The 60 inch span supports use over base cabinets or as a standalone run on open walls, tying into standard cabinet widths. At 10 inch deep, the shelf projects enough to hold kitchen plates or bath containers while still working above backsplashes and vanities. The ability to trim depth down to 2 inches lets installers adapt one shelf model for shallow accent ledges, window returns, or narrow wall sections in the same room. Maple construction aligns with projects that already use maple doors, frames, or trim, helping the finished shelf blend into the overall millwork package.

Details That Help Repeatable Mounting Results

The complete turn-key hanging system for this Omega National Maple floating shelf means the brackets and mounting hardware are designed to work with the 2-1/2 inch thick, 10 inch deep, 60 inch long shelf body, supporting consistent installations across multiple rooms or units. The 15 lb per running foot rating exceeds KCMA requirements, giving a defined structural margin when planning repeated shelf loads in residential cabinetry projects. Trimmable depth down to 2 inches lets you cut the shelf front-to-back while still working within the rated system, so aligned rows of shelves can follow irregular walls or design features without changing components. Because the shelf is built from solid wood and wood veneer, the cut edges can be finished to match the face, allowing trimmed installations to present as factory-sized pieces. Made in the USA production supports consistent dimensions from shelf to shelf, which matters when lining up bracket positions and maintaining straight reveal lines along a wall.

Common Questions About FS0160MUF1 Floating Shelf

Select This Maple Shelf For Clean Wall Runs

This 60 inch Omega National Maple floating shelf brings a turn-key hanging system, a 15 lb per running foot rating, and trimmable 10 inch depth into one ready-to-finish component. For kitchens, baths, closets, or garage organization needing concealed-support shelving in maple, this FS0160MUF1 model lets you plan consistent spans, cut depth where needed, and finish to match surrounding work. Add it to your layout when a solid wood and wood veneer, made in the USA floating shelf answers both the design and load requirements of the project.