Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0160QUF1 to RSFS0160QUF1.
Omega National alder floating shelf gives you a finished-look shelf with concealed support for kitchen, bath, closet, or garage runs. This FS0160QUF1 model is 2-1/2 inches thick, so it creates a substantial, built-in appearance that matches todayâs transitional and contemporary styling. The 10 inch depth provides a practical surface for dishes, bath linens, or garage organizers without over-projecting from the wall. The 60 inch width works well over base cabinets or as a stand-alone run on open walls. Solid wood and wood veneer construction in alder provides a real-wood surface ready for your preferred stain or clear finish. Because the shelf is offered as a ready-to-finish alder unit, you can align the final color with surrounding cabinetry or trim work for a consistent installation.
The floating shelf uses a hanging system with brackets designed for concealed mounting, so installers can fasten to the wall structure and slide the shelf body over the support. The hanging system is rated to safely support 15 lb per running foot of shelf length, which means this 60 inch shelf is designed around typical KCMA load expectations for residential cabinetry. That load rating exceeds KCMA requirements, so the installed shelf is engineered for common dishware, toiletries, or closet items within that capacity. The shelves can be trimmed from the standard 10 inch depth down to 2 inches depth, letting you adjust projection to fit tighter spaces while still using the same basic hanging approach.
This Omega National alder floating shelf is part of a line of floating shelves and concealed brackets, so it is built for exposed-wall storage where hardware should stay hidden. The 60 inch width suits open wall spaces in kitchens, providing a continuous run over base cabinets or between tall units. In baths, the 10 inch depth gives a surface that can sit above a vanity backsplash or between side walls without overwhelming the room. For closet and garage organization, the 2-1/2 inch thick profile reads more like custom built-in shelving, which works well with other wood components in those applications. Because the shelf can be trimmed to a 2 inch minimum depth from the original 10 inches, you can adapt the same product for narrow hall walls or shallow alcoves while maintaining the same alder face and edge profile.
The complete turn-key system is described as including the floating shelf, hanging brackets, and hardware for mounting, so the installer can approach the job as a matched set rather than assembling components from different sources. The hanging system safely supporting 15 lb per running foot of shelf length gives a clear numeric target when planning what will sit on the shelf and how it will be used day to day. Because that rating exceeds KCMA requirements, the shelf aligns with typical cabinet performance expectations, which supports consistent project specifications across wall cabinets and open shelving. Solid wood and wood veneer construction, with paint grade versions made from poplar and MDF, means the shelf body is designed as a cabinet-grade component rather than a light-duty display board. The ready-to-finish alder surface lets finishing crews sand, stain, and topcoat alongside doors and frames, so sheen and color can be handled in the same booth cycle. Being made in the USA supports projects that call for domestic wood products and predictable supply from Omega National Products.
The FS0160QUF1 shelf is 2-1/2 inches thick, 10 inches deep, and 60 inches wide, so it creates a substantial floating run suitable for typical kitchen, bath, closet, or garage wall spans.
The shelf can be trimmed from the standard 10 inch depth down to a 2 inch depth, allowing you to reduce wall projection while still using the same alder shelf body.
The hanging system safely supports 15 lb per running foot of shelf length, which exceeds KCMA requirements and provides a clear load guideline for everyday storage use.
This model uses solid wood and wood veneer construction in alder, giving a real-wood surface that is ready for finishing to match surrounding cabinetry and trim work.
The shelf is offered as a ready-to-finish alder unit, so it is supplied bare and can be stained or clear coated to coordinate with existing woodwork on the project.
The Omega National FS0160QUF1 floating shelf is made in the USA, supporting projects that call for domestically produced wood shelving components.
The Omega National alder floating shelf FS0160QUF1 brings a 2-1/2 inch thick, 60 inch wide, 10 inch deep real-wood shelf to kitchen, bath, closet, and garage layouts. With a concealed hanging system rated at 15 lb per running foot of shelf length, it is engineered for typical residential storage loads within that capacity. The ability to trim depth from 10 inches down to 2 inches lets you adapt one shelf specification across multiple room conditions. Solid wood and wood veneer construction in ready-to-finish alder supports on-site staining and topcoating alongside matching millwork. For projects that value concealed support, domestic manufacture, and a defined load rating that exceeds KCMA requirements, this floating shelf offers a straightforward way to build clean, open wall runs.
Sold In: 1 Each
