Omega National Paint Grade 2-1/2" x 10" x 60" Floating Shelf, FS0160XUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0160XUF1 to RSFS0160XUF1.

Omega National Paint Grade Floating Shelf For Clean Storage

Omega National paint grade floating shelf is a 2-1/2 inch thick x 10 inch deep x 60 inch long wall shelf that provides a wide, stable surface for storage or display in kitchens, baths, closets, or garages. The shelf is built from solid wood and wood veneer, using poplar and MDF in the paint grade version, so it offers a smooth, consistent base for primer and paint where a uniform finish is important. This floating shelf is part of Omega National Products floating shelves and concealed brackets range, giving a concealed-mount look that keeps hardware out of sight for a clean wall appearance. The shelf is made in the USA, which supports consistent production standards that installers can plan around from job to job.

Floating Shelf Details That Support Daily Use

• The 60 inch width spans longer wall sections in kitchens, baths, or closets, helping installers bridge wider spaces with a single shelf run instead of breaking the line with multiple shorter shelves.
• The 10 inch depth gives useful storage area while staying close to the wall, which helps keep items accessible without pulling the working line too far into the room.
• The 2-1/2 inch thickness delivers a substantial edge profile, helping the shelf visually match other built-up tops or trim details in transitional and contemporary rooms.
• The paint grade construction in poplar and MDF provides a stable, smooth surface for finishing, reducing surface variation when a painted color match is important across several shelves.
• The solid wood and wood veneer construction supports normal household loads, giving the shelf a wood-based feel that aligns well with other cabinet and millwork components on the project.

Installation Capacity And Mounting Performance

The hanging system for this Omega National floating shelf safely supports 15 lb per running foot of shelf length, so a 60 inch shelf is rated for typical dishware, small appliances, or bath items without over-building the wall framing. This load rating exceeds KCMA requirements, giving installers a defined performance level when they are selecting shelving to coordinate with KCMA-rated cabinetry. The shelf depth can be trimmed from 10 inches down to 2 inches, allowing onsite adjustment to clear backsplashes, casings, or other obstacles while still staying within the intended design range. The shelf is part of a complete turn-key system with a hanging method and mounting hardware specified by Omega National Products, so the mounting approach is engineered to work with the shelf construction.

Where This FS0160XUF1 Floating Shelf Works Best

Using The 60 x 10 Shelf In Kitchen And Bath

This Omega National paint grade 2-1/2 inch x 10 inch x 60 inch floating shelf fits well into transitional and contemporary kitchen and bath styling because the concealed mounting keeps the wall line open while still carrying storage. The solid wood and wood veneer construction lets the shelf visually connect with nearby cabinets, end panels, and trim so the run reads as part of the overall millwork package. In closet or garage organization layouts, the 60 inch span helps create continuous storage runs, and the 10 inch depth offers a balance between capacity and clearance along walk paths or work zones.

The paint grade poplar and MDF build gives a uniform substrate for primer and topcoat, which supports tight color matching to painted cabinets, walls, or built-ins. Because the shelf can be trimmed down to 2 inches in depth, installers can keep a consistent material and edge profile even when different walls call for different depths, instead of changing to another product line. The made in the USA production provides a consistent specification for repeated projects, which is useful when a shop standardizes on a single floating shelf platform for multiple jobs.

Load Rating, Trimmability, And Repeatable Results

The hanging system rating of 15 lb per running foot of shelf length gives a clear load guideline, so installers can plan typical use like dishes, jars, or bath supplies within that capacity without improvising structural assumptions. By exceeding KCMA requirements, the shelf aligns with the performance expectations normally applied to cabinet installations, which supports consistent quality targets across the room. The 2-1/2 inch thickness works with the concealed mounting to create a solid-looking edge that visually supports the published load rating, helping the installation feel appropriate for everyday use.

The ability to trim the 10 inch deep shelf down to 2 inches lets installers fine-tune the projection to work around tile returns, window trim, or tight corridors while keeping the same Omega National Products profile and construction. Because the shelf uses solid wood and wood veneer, with paint grade versions in poplar and MDF, field cuts can maintain a wood-based edge suitable for finishing as part of the job sequence. Having these dimensions and material details defined under the FS0160XUF1 part number simplifies repeat ordering, layout drawings, and cut lists for shops that rely on standard components.

Common Questions About The FS0160XUF1 Shelf

Selecting This Floating Shelf For Your Project

The Omega National paint grade 2-1/2 inch x 10 inch x 60 inch floating shelf FS0160XUF1 offers a defined 15 lb per running foot load rating, trim-to-depth flexibility, and a smooth poplar and MDF paintable surface. These details help align the shelf with transitional and contemporary kitchen, bath, closet, or garage layouts that call for a clean, concealed support look. For projects that standardize on wood-based floating shelving with known capacity and dimensions, this made in the USA shelf provides a consistent option that fits into cabinet-grade design expectations.