Partition Pilaster Shoe Kit, 1.25" x 4"

Partition Pilaster Shoe Kit For Toilet Partitions

Partition pilaster shoe kit from Jacknob Corporation provides a coordinated pilaster base solution for toilet partition work where a 1.25 inch wide pilaster edge needs a finished shoe and matching channel. The pilaster shoe is made of stainless steel, so it delivers a hard metal surface at the base of the partition that stands up to contact and anchors the look around the pilaster bottom. The u-channel is made of aluminum, giving you a stable receiving channel that keeps weight down while still supporting the shoe and pilaster edge. The pilaster shoe has a satin stainless steel finish, providing a low-luster appearance that visually matches other satin stainless toilet partition hardware in the same area. The u-channel has a milled aluminum finish, so its surface is ready for straightforward installation and aligns visually with typical aluminum partition framing.

Key Partition Pilaster Shoe Kit Details

• The pilaster shoe is made of stainless steel, which creates a robust metal base around the pilaster edge that handles typical restroom traffic at floor level.
• The u-channel is made of aluminum, so it forms a rigid channel for the pilaster while keeping overall weight low for easier handling during installation.
• The pilaster shoe has a satin stainless steel finish, helping it visually integrate with other satin stainless toilet partition hardware in the same stall row.
• The u-channel uses a milled aluminum finish, so its unfinished metal surface suits projects where exposed aluminum trim matches surrounding partition framing.
• The pilaster shoe measures 1.25 inches wide by 3 inches high by 4 inches long, giving a defined metal wrap dimension that fits pilaster edges built to that width.
• The u-channel length is 4 inches, matching the shoe length so the channel and shoe work together along the same short base section.

Installation Fit Around The Pilaster Base

The pilaster shoe width of 1.25 inches means it is sized to wrap pilaster edges built to that nominal width, giving the finished base a tight, defined outline at the floor. The 3 inch height of the pilaster shoe sets how far up the pilaster face the metal protection and finish extend, which helps control where wall finishes or panel edges meet exposed metal. The 4 inch length of the pilaster shoe determines the run of metal along the floor line, defining a short protective strip that matches the u-channel length. The 4 inch u-channel pairs with that length, so channel and shoe occupy the same base segment, simplifying layout decisions around the bottom of the pilaster.

Using This Jacknob Partition Pilaster Shoe Kit

Where This Toilet Partition Hardware Fits Best

This toilet partition hardware kit sits at the base of a pilaster in restroom partition assemblies that use a 1.25 inch wide pilaster edge. The stainless steel pilaster shoe positions a formed metal cover around the lower 3 inches of the pilaster, concentrating protection where the pilaster meets the floor. The 4 inch length of the pilaster shoe defines a compact base section, so it suits installations where only a short metal run is needed at the floor. The aluminum u-channel runs the same 4 inch length as the shoe, so channel and shoe work as a matched pair on that same segment of the pilaster. The satin stainless steel finish on the shoe aligns with satin stainless toilet partition hardware, helping keep a consistent appearance around hinges, brackets, and other stainless components.

Details That Support Consistent Pilaster Alignment

The stainless steel construction of the pilaster shoe gives the base a solid metal structure, helping the bottom of the pilaster hold its shape where it meets the floor and related hardware. The aluminum material of the u-channel adds a rigid guiding surface along the same 4 inch run, helping the pilaster sit in a defined track rather than against a flat plate. The 1.25 inch shoe width controls the side-to-side dimension at the base, which helps keep the visual reveal consistent from one pilaster to the next when multiple shoes of the same size are used. The 3 inch height of the pilaster shoe sets a repeatable vertical reference on each pilaster, which helps align adjacent shoes to the same height line for a uniform sightline along the stall fronts. The milled aluminum finish on the u-channel matches the raw aluminum look often used in partition framing, tying the channel visually into the rest of the structural hardware.

Common Questions About Jacknob 37049 Pilaster Shoe

Select This Pilaster Shoe Kit For Matching Work

This partition pilaster shoe kit from Jacknob Corporation pairs a stainless steel pilaster shoe with an aluminum u-channel in coordinated 4 inch lengths for toilet partition projects. The 1.25 inch width and 3 inch height on the pilaster shoe define a consistent base proportion wherever the kit is used. The satin stainless steel finish on the shoe and milled aluminum finish on the u-channel align with common toilet partition hardware materials. For jobs calling for a Jacknob 37049 layout around 1.25 inch pilaster edges, this kit supplies the matched shoe and channel geometry needed for a uniform base detail.