Partition Pilaster Shoe Kit For Toilet Partitions

Partition pilaster shoe kit from Jacknob Corporation provides a stainless steel pilaster shoe and aluminum u-channel sized for toilet partition work, so installers get a matched set for securing and finishing a pilaster edge. The pilaster shoe in this kit is 1.25 inches wide, 3 inches high, and 7 inches long, which sets a clear footprint for layout, drilling, and alignment against the pilaster. This kit is part of the toilet partition hardware class, so it is built around common partition layouts in commercial restroom projects. The pilaster shoe uses a satin stainless steel finish, which gives the exposed edge a clean, consistent appearance that blends with other stainless partition components. The u-channel in the kit is milled aluminum, which provides a rigid guide at the pilaster edge while keeping the channel light and workable during installation on site.

Key Pilaster Shoe Kit Details For Installers

• The pilaster shoe measures 1.25 inches wide by 3 inches high by 7 inches long, so installers can plan cuts, edge prep, and drilling locations to match these dimensions during partition layout.
• The pilaster shoe is made of stainless steel, which gives the exposed edge a solid metal surround that resists everyday restroom use and supports stable pilaster attachment points.
• The pilaster shoe has a satin stainless steel finish, providing a uniform, low-glare appearance that aligns visually with other satin stainless toilet partition hardware in the same area.
• The u-channel is made of aluminum, offering a lighter metal channel that is easy to handle during fitting, while still bracing the pilaster edge for a straight, clean line.
• The u-channel uses a milled aluminum finish, which gives the channel a consistent metal surface that pairs functionally with the stainless shoe at the pilaster interface.
• This product is part of toilet partition hardware from Jacknob Corporation, which helps buyers group it with hinges, brackets, and other restroom partition components in a coordinated hardware set.

Pilaster Shoe And U-Channel Installation Fit

The pilaster shoe in this kit has a defined size of 1.25 inches wide by 3 inches high by 7 inches long, so installers can match it to the pilaster face and floor or base conditions without guessing the coverage area. The stainless steel construction supports a solid transition at the base or edge where the pilaster meets supporting surfaces. The aluminum u-channel in the kit provides a complementary channel profile, so the pilaster edge can be captured and aligned alongside the shoe during mounting. The satin stainless steel finish on the shoe and milled aluminum finish on the u-channel help keep visible lines straight and consistent, which is useful when aligning multiple pilasters in a restroom run.

Using This Toilet Partition Hardware Kit On Site

Where This Partition Pilaster Shoe Kit Works

This partition pilaster shoe kit is classified as toilet partition hardware, so it is intended for use on toilet partition pilasters in restroom installations. The 1.25 inch width of the pilaster shoe directs it toward pilaster edges that match that width, helping installers select it where the shoe must wrap or cover a narrow pilaster profile. With a length of 7 inches and height of 3 inches, the shoe provides defined metal coverage along the lower portion of a pilaster, which supports a neat transition at the floor or base in a typical partition layout. The stainless steel shoe and aluminum u-channel pairing give both an exposed metal cover and an edge channel, which suits partition conditions where a pilaster needs both coverage and guidance. Because the finish on the shoe is satin stainless steel, it visually coordinates with other satin stainless toilet partition hardware used in many commercial restrooms.

Details That Support Repeatable Pilaster Alignment

The pilaster shoe dimensions of 1.25 inches wide by 3 inches high by 7 inches long give installers fixed reference numbers for repetitive work, which is important when multiple pilasters must line up along a common floor line or wall layout. Stainless steel construction at the shoe creates a stable, rigid cover that helps hold the pilaster base area in a consistent plane once fastened. The aluminum u-channel, finished in milled aluminum, acts as a guide along the pilaster edge, which aids in keeping the pilaster straight and true during fastening. The satin stainless finish on the shoe helps maintain a consistent visual band at the base of each pilaster, supporting uniform sightlines in a run of partitions. With all major components coming from Jacknob Corporation under part number 37079, installers can repeat the same selection across projects that use the same pilaster width and appearance requirements.

Common Questions About This Pilaster Shoe Kit

Selecting This Kit For Toilet Partition Work

This partition pilaster shoe kit from Jacknob Corporation combines a stainless steel pilaster shoe with an aluminum u-channel sized at 1.25 inches wide by 3 inches high by 7 inches long, giving installers a defined metal profile for toilet partition pilasters. The satin stainless steel finish on the shoe and the milled aluminum finish on the u-channel provide coordinated metal surfaces that align with typical restroom hardware appearances. For projects using toilet partition hardware in this size range, this kit offers a consistent way to cover and guide the pilaster edge across multiple openings.