Partition Pilaster Shoe Kit, 1.25" x 12"

Partition Pilaster Shoe Kit For Toilet Partitions

partition pilaster shoe kit from Jacknob Corporation is a toilet partition hardware component designed to cover and support a pilaster base at the floor, which helps present a clean, finished look at the bottom of the panel run. The kit is categorized as builders hardware and toilet partition hardware, so it is suited to commercial restroom partition assemblies where consistent hardware specification is important. The pilaster shoe in this kit measures 1.25 inches wide, 3 inches high, and 12 inches long, giving it a low profile along the floor while spanning a full foot of pilaster length for coverage. The kit is identified by manufacturer part number 37129, which aligns ordering and field reference when matching existing hardware on site. Sold per kit, this product is configured so each order unit corresponds with one pilaster location in the layout, simplifying takeoff counts for installers.

Key Pilaster Shoe Kit Details For Pros

• The pilaster shoe is made of stainless steel, which provides a rigid metal cover around the pilaster base so the lower edge stays mechanically protected in everyday traffic.
• The u-channel is made of aluminum, which adds a light but stable channel section that works with the shoe to capture the pilaster edge where it meets the floor.
• The satin stainless steel finish on the pilaster shoe offers a muted metal appearance that coordinates with other satin stainless restroom hardware for a consistent visual line at floor level.
• The u-channel has a milled aluminum finish, giving it a straightforward, unfinished aluminum surface that fits typical partition framing without introducing additional surface treatments.
• The pilaster shoe length of 12 inches extends along a significant portion of the pilaster base, which helps create a continuous trim strip rather than a short cap at the contact point.

Mounting-Oriented Details For Partition Alignment

The 1.25 inch width of the pilaster shoe sets how it wraps around the pilaster edge, establishing a defined face dimension where the partition meets the floor. The 3 inch height raises the metal trim several inches up the pilaster, which helps protect the lower section from contact in cleaning zones. The 12 inch length of the shoe allows installers to align the part along a meaningful stretch of the pilaster, so the visible edge follows the line of the partition rather than just covering a small corner. An 8 inch u-channel is part of the kit design, giving a shorter internal channel length that works together with the 12 inch shoe to capture and guide the pilaster in the floor region.

How This Jacknob Pilaster Shoe Kit Works

Toilet Partition Pilaster Use And Position

This Jacknob pilaster shoe kit sits in the toilet partition hardware class, so its role is at the base of partition pilasters in restroom layouts. The stainless steel pilaster shoe forms the outer visible band along the floor, so it defines the line where the pilaster meets finished flooring. With a 1.25 inch width, the shoe is sized to match pilaster edges that accept that face dimension, giving the assembly a squared, metal-wrapped base. The 3 inch height gives vertical coverage that rises off the floor, so the trim band reads as part of the pilaster rather than a thin edge. At 12 inches long, the shoe extends along the pilaster base, tying the appearance together across a foot of length, which helps each support post look anchored instead of point-loaded at a single bracket.

Details That Support Consistent Hardware Results

The satin stainless steel finish on the pilaster shoe sets a consistent sheen and tone, which matters when matching other satin stainless pieces in a partition system so each stall presents the same visual level. Stainless steel as the shoe material gives a solid metal body at the floor, which supports the pilaster base with a robust trim form. The 8 inch aluminum u-channel partners with the stainless shoe by providing an interior channel element in a lighter metal, so the structural capture of the pilaster is handled by coordinated components rather than mixed, unrelated parts. The milled aluminum finish on the u-channel keeps that internal piece straightforward, allowing the satin stainless outer shoe to define the seen surface while the aluminum channel serves as a functional guide. Sold per kit, the 37129 part number ties the stainless shoe, aluminum u-channel, and associated elements into a single, clearly identified toilet partition hardware solution.

Common Questions About Jacknob 37129 Pilaster Shoe

Select This Pilaster Shoe Kit For Toilet Partitions

This stainless steel and aluminum partition pilaster shoe kit from Jacknob Corporation provides a matched set of floor-level toilet partition hardware with defined dimensions and finishes. With a 1.25 inch by 3 inch by 12 inch pilaster shoe, an 8 inch milled aluminum u-channel, and the 37129 part number tying the configuration together, the kit offers a clear, repeatable choice for outfitting or matching pilaster bases in commercial restroom partitions. Sold per kit, it aligns directly with counting pilaster locations, supporting straightforward selection for new layouts or hardware updates.