Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the 16 inch mounting bracket set for Fulterer's 5400 Series side-mount drawer slides, providing the rear support needed to install those slides correctly in face-frame cabinets or wherever the back of the slide needs a fixed anchor point.
Side-mount slides need a solid anchor at the rear of the cabinet, and in face-frame construction that anchor is not always a flat panel surface — the face frame sits proud of the cabinet side, leaving the back of the slide unsupported without a bracket. These 16 inch brackets bridge that gap, giving the rear end of each 5400 Series slide a fixed mounting point on the cabinet back wall or rear frame member. The result is a stable, rattle-free installation that keeps the slide aligned through years of use. They also serve frameless cabinets where the interior depth or panel configuration calls for rear support rather than a direct side-panel mount at the back.
The brackets are steel with a zinc finish — a practical, durable combination for hardware that spends its life inside a cabinet where it will never be seen. Zinc plating handles the humidity cycles of a kitchen or bath environment without corroding or degrading the steel beneath. The construction is straightforward: formed steel that holds its geometry under the repeated loading a working drawer delivers over time.
Cabinet shops building or refacing face-frame kitchens with Fulterer 5400 Series slides will reach for this bracket set on nearly every run. Contractors retrofitting slides into existing face-frame casework will find it equally essential. If you are replacing 5400 Series slides and the original brackets are worn, damaged, or missing, this set restores the installation to spec. The non-handed format means one part number covers both sides, which keeps the parts list clean and reduces the chance of a misorder on a multi-drawer job.
Not always — in frameless cabinets where the slide can screw directly to a flat side panel along its full length, rear brackets may not be required. In face-frame cabinets, the rear bracket is typically necessary to support the back end of the slide where the panel is set behind the frame.
No. These brackets are specific to the Fulterer 5400 Series. Fulterer brackets are engineered per series and are not interchangeable across the line.
This is a bracket set — enough hardware to complete one drawer run. Confirm the set quantity in the product spec block before ordering for multi-drawer projects.
Included hardware is detailed in the product spec block. If screws are not listed there, plan to source appropriate fasteners for your cabinet material separately.
The right bracket set is the difference between a slide that performs to spec and one that racks, sags, or rattles after the first season of use — order the 16 inch set alongside your 5400 Series slides and close that gap on the first trip.
Sold In: 2 Set
