Peter Meier Hanging Bracket w/Safety Lock, Right Hand, Dowel Mount, 875-AS-24S

875-AS Hanging Rail With Safety Lock For 704 Series

875-AS hanging rail with safety lock is a steel wall hanging rail designed for Camar's 704 Series Hanging Brackets with Safety Lock, so it provides the matched support these right-hand dowel mount brackets are built to work on in closet and storage runs. This rail is part of a wall hanging rail system, so it gives installers a defined structural line to carry the load of compatible 704 Series brackets along a wall section. Steel thickness of 1.8mm, identified as 15 gauge, gives the rail a solid cross-section, so it resists bending when used with its intended hanging brackets in typical closet and organization layouts. The rail is identified as 875-AS and 875-AS-24S by Peter Meier, Inc., which helps align it with drawings, cut lists, or ordering systems where that part number is required.

Key Wall Hanging Rail Details For Installers

• This hanging rail is designed for Camar's 704 Series Hanging Brackets with Safety Lock, so it matches the interface and layout those brackets expect, reducing layout guesswork on closet and organization installations.
• The product sits in the Wall Hanging Rail System class, so it is intended to act as the structural rail component in a bracket and rail system rather than a standalone hook point, which supports consistent loads across a run.
• Steel thickness of 1.8mm, specified as 15 gauge, gives the rail a defined material thickness that resists flexing under design loads, helping maintain alignment of the 704 Series brackets along the wall.
• The rail is identified in the SAP description as 875-AS Hanging Rail with Safety Lock at 93.5 feet, so projects referencing that description can match this part to plans, takeoffs, or reorders that call out the same designation.
• Association with the Closet Bracket & Rail Systems category ties this rail to closet and storage organization applications, so it fits into layouts where continuous rail support is preferred over individual wall points.

Rail Mounting Role In Wall Hanging Workflow

This hanging rail functions as the wall-mounted element in a wall hanging rail system for Camar's 704 Series Hanging Brackets with Safety Lock, so it establishes the horizontal reference line that those right-hand dowel mount brackets engage in finished installations. Because it is part of a closet bracket and rail system, the rail lets the installer distribute closet or organization loads along a continuous steel member instead of concentrating forces at isolated locations. The 1.8mm, 15 gauge steel thickness keeps the rail profile substantial in relation to its length and application, which supports stable engagement of the compatible hanging brackets in typical closet or garage organization environments.

Using This Steel Hanging Rail In Closet Systems

Where This Wall Hanging Rail System Fits Best

This steel hanging rail is categorized under Shelf, Closet & Garage Organization and Closet Bracket & Rail Systems, so it slots into projects where continuous rail support is used to carry cabinets, shelves, or related components in closets or storage walls. Because it is specifically described as designed for Camar's 704 Series Hanging Brackets with Safety Lock, its best fit is on wall runs where those brackets will be used as the main hanging hardware. The rail's role as a wall hanging rail system component means it is meant to sit at the structural level behind the finished closet or organization elements, so installers can align multiple 704 Series brackets along a single steel reference to hold the run true.

Why The 875-AS Steel Details Matter On Site

The steel thickness of 1.8mm, identified as 15 gauge, determines how the rail behaves once loaded by Camar's 704 Series Hanging Brackets with Safety Lock, so installers can anticipate a relatively rigid support member when the rail is properly integrated into a closet bracket and rail system. The SAP description calling this the 875-AS Hanging Rail with Safety Lock at 93.5 feet gives purchasing and project teams a consistent way to reference the same component across drawings, orders, and site use, which helps keep the specified rail matched from planning through installation. The manufacturer part number 875-AS-24S from Peter Meier, Inc. ties the rail to the 704 Series bracket design intent, so installers working with Camar's 704 Series Hanging Brackets with Safety Lock can align their hardware selections with this rail as the matching wall support in closet or garage organization applications.

Common Questions About The 875-AS Hanging Rail

Selecting This Rail For Your 704 Series Runs

The 875-AS hanging rail with safety lock design is tailored to Camar's 704 Series Hanging Brackets with Safety Lock, so it suits projects already built around those brackets in closet and storage walls. Its role in a wall hanging rail system lets installers set a single continuous steel rail as the backbone for 704 Series layouts, which supports consistent bracket spacing and straight runs. With 1.8mm, 15 gauge steel and clear identification as 875-AS-24S, this rail aligns ordering, planning, and installation around one defined component for Camar 704 Series hanging bracket applications.