Peter Meier Hanging Bracket w/Safety Lock, Left Hand, Screw Mount, 704-VV-SX

Hanging Bracket With Safety Lock For Wall Cabinets

hanging bracket with safety lock is a 704 Series wall cabinet component from Peter Meier, Inc. that supports wall-mounted storage in closet, garage, or cabinet runs. The bracket is part of a wall hanging rail system, so it carries cabinet load back to the rail for stable mounting. This unit is a left hand version, so it is used on the left side of a cabinet where handed hardware matters for layout. A slim design keeps the bracket profile tight, which helps when working in shallow cabinets or behind tight reveals. The bracket is made from steel with a nickel plated finish, providing a hard metal body with a plated surface suited to typical indoor cabinet environments. A built-in safety lock works with a screw to secure the cabinet position on the rail, so the cabinet stays locked on the bracket during normal use. The bracket is sold individually, which fits jobs where quantities are planned per cabinet.

Key 704 Series Bracket Details For Installers

• The 704 Series hanging bracket design ties into a wall hanging rail system, so load transfers to the rail for predictable wall cabinet support across a run.
• A left hand configuration matches cabinets that require specific handed hardware, which simplifies planning when paired with a corresponding right hand part.
• Steel construction with a nickel plated finish gives the bracket a metal body with a plated surface suited to standard interior cabinet and closet environments.
• A stated 180 lbs weight capacity per pair supports typical wall cabinet loading when brackets are used together as designed on a rail system.
• The slim bracket profile helps preserve interior and rear space inside the cabinet, which matters where clearance behind backs or within shallow units is tight.
• Cover caps are sold separately, so visible hardware areas can be finished with caps where an exposed bracket appearance is not acceptable.

Screw Mount Hanging Bracket Setup Details

This hanging bracket uses a screw mount layout, so it fastens directly to the cabinet using screws driven through the bracket body. Recommended screws are #8 flat head, which match the intended mounting interface on the bracket for proper seating. A depth adjustment range of 12mm allows shifting the cabinet relative to the wall, which helps align door faces or front edges along a run. A height adjustment range of 19mm lets the cabinet move up or down on the bracket, so reveals and joints across multiple cabinets can be brought into line. The safety lock engages with a screw to hold the cabinet on the bracket, which is valuable on taller or heavier wall cabinets where secure engagement on the rail is critical.

Using The 704 Series Bracket In Cabinet Runs

Where This Left Hand Bracket Is Applied

This hanging bracket is intended for wall cabinets in closet, garage, or general storage installations where a wall hanging rail system is specified. As a left hand bracket, it is placed on the left side of a cabinet carcass, paired with a right hand bracket on the opposite side in typical applications. The wall cabinet role means the bracket works at the top of a run, carrying cabinet and contents weight back to the rail. In closet and garage organization layouts, the steel nickel plated finish aligns with other metal hardware components used in the system. The 180 lbs weight capacity per pair defines loads for cabinets supported by two brackets, guiding how the cabinet size and contents are planned around the hanging system.

Adjustment And Locking For Repeatable Alignment

The 12mm depth adjustment built into the bracket lets the installer move the cabinet in or out relative to the wall plane, which is useful when correcting wall irregularities or aligning multiple cabinet faces. The 19mm height adjustment range allows vertical tuning of cabinet position, helping create consistent reveals between adjacent cabinets and above countertops or closet fixtures. Because the bracket is part of a screw mount system, #8 flat head screws seat properly in the bracket and cabinet material for a flush fit that keeps the hardware aligned. The integrated safety lock uses a screw to secure the cabinet on the hanging bracket, so once adjustments are made the cabinet remains fixed on the rail during everyday use. Together, the rail connection, adjustment ranges, and safety lock support repeatable installation results across multiple similar cabinets in the same project.

Common Questions About This Hanging Bracket

Select This Bracket For Rail-Mounted Wall Cabinets

The Hanging Bracket with Safety Lock, Left Hand, Screw Mount 704 Series - Peter Meier, Inc. 704-VV-SX suits wall cabinets that hang on a rail system in closet, garage, or cabinet projects. With a slim steel nickel plated body, 180 lbs weight capacity per pair, and defined depth and height adjustment ranges, it supports alignment-driven installations. The left hand orientation fits layouts planned around handed hardware, while the screw mount design and safety lock provide a secure connection between cabinet and rail-driven support.