
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hanging Bracket with Safety Lock is a right hand, screw mount 704 Series bracket for wall cabinets that supports cabinet installation in closet, garage, or storage layouts. The wall hanging rail system category positioning ties this part directly to organizing shelf, closet, and garage runs where secure wall mounting is needed. The slim design keeps the bracket discreet behind the cabinet, which frees space for storage and keeps the focus on the finished run instead of the hardware. Steel construction provides a solid mounting point for the cabinet load, and the nickel plated finish gives the metal a clean, uniform surface that suits typical cabinet interiors. A 180 lbs. weight capacity per pair allows the bracket to support typical residential or light commercial wall cabinets when installed in pairs, so cabinets can be loaded for everyday use. The integrated safety lock screw function helps hold the cabinet on the rail and limits cabinet shift under normal use.
This right hand screw mount bracket uses recommended #8 flat head screws for fastening, aligning with common cabinet screw tooling and pilot routines in the shop or on site. The depth adjustment range of 12mm allows the installer to move the cabinet in or out relative to the wall, which helps align cabinet faces in a run and address minor wall irregularities. The height adjustment range of 19mm lets the cabinet be shifted up or down at the bracket, which is useful for leveling cabinet lines and matching adjacent units in a rail system. The screw mount approach keeps mounting points accessible at the cabinet side, so installers can set, adjust, and tighten the bracket while checking reveals and level. Because this product is sold in each units, buyers can order the exact count required for the cabinet layout or replacement work.
The Hanging Bracket w/Safety Lock, Right Hand, Screw Mount 704 Series - Peter Meier, Inc. 704-VV-DX is designed as part of a wall hanging rail system for wall cabinets, which aligns it with closet, shelf, and garage organization projects listed in the product category. The right hand orientation targets installations where a handed bracket is required, such as paired left and right supports holding a cabinet on a rail. Its slim design keeps the bracket body close to the cabinet side, which frees internal cabinet space for shelving or bins while still giving full support at the rail connection. The steel, nickel plated construction makes this bracket suitable for typical interior cabinet environments where metal components are exposed when doors are open. A 180 lbs. weight capacity per pair supports standard wall cabinet loading patterns in organization layouts, so installers can use pairs of these brackets to carry cabinet bodies within that rated range.
The depth adjustment range of 12mm on this 704 Series bracket provides room to bring cabinet faces into alignment along a wall, which helps achieve straight, consistent front reveals when multiple cabinets share a rail. The height adjustment range of 19mm gives the installer up and down movement at the bracket, which is valuable for leveling adjoining cabinets and matching them to reference lines in closet or garage layouts. The safety lock screw feature adds a locking point between the bracket and cabinet, which keeps the cabinet engaged with the hanging system during everyday loading and use. Using recommended #8 flat head screws ties the bracket to standard cabinet fastening practice, which simplifies installation steps for both shop assembly and field adjustment. As a wall hanging rail system component sold in each quantities, the Peter Meier 704-VV-DX can be specified as a single right hand bracket for new cabinet runs or for service replacement when an existing right hand unit needs to match the original adjustment ranges and load rating.
The Hanging Bracket with Safety Lock is for wall cabinets in shelf, closet, and garage organization projects, so it supports typical storage cabinet runs mounted on a wall hanging rail system.
The 180 lbs. weight capacity per pair defines the load two brackets are designed to support, guiding how many right and left brackets are used to carry a given wall cabinet section.
The right hand screw mount design means this bracket is installed on the cabinet's right side using screws, pairing with a corresponding left side unit for balanced wall cabinet support.
The 12mm depth and 19mm height adjustment ranges let installers shift the cabinet in, out, up, or down at the bracket, improving face alignment and leveling across a rail-mounted cabinet run.
The steel, nickel plated construction provides a rigid load-bearing bracket with a smooth, uniform surface that suits exposed interior cabinet hardware in closet and garage organization settings.
The safety lock screw on this hanging bracket secures the cabinet to the hanging system at the bracket, limiting cabinet movement on the rail during regular use and loading cycles.
The Hanging Bracket with Safety Lock, Right Hand, Screw Mount 704 Series - Peter Meier, Inc. 704-VV-DX combines a 180 lbs. weight capacity per pair, 12mm depth adjustment, and 19mm height adjustment into one wall cabinet component, so you can hang and fine-tune cabinets within a wall hanging rail system. By choosing this right hand, steel nickel plated bracket sold in each units, you can match existing 704 Series layouts or build new closet and garage organization runs that rely on consistent adjustment ranges and the added security of a safety lock screw at the bracket.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CM875-AS-24S Mfr# 875-AS-24S | Hanging Bracket w/Safety Lock, Right Hand, Dowel Mount 704 Series - Peter Meier, Inc. 875-AS-24S |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CM704-00-AP Mfr# 704-00-AP | Insertion Tool for 704 Series Hanging Brackets - Peter Meier, Inc. 704-00-AP | ||||
Sold in: 1 Each | CM883-01-24S Mfr# 883-01-24S | Cover for Hanging Rail w/Safety Lock, 93" Length White Color - Peter Meier, Inc. 883-01-24S |