Riptide drawer sides 3.375 height defines these Riptide drawer side blanks as pre-dimensioned components for drawer construction, so drawer boxes can be cut and assembled to a consistent profile. The drawer sides are .625 inch thick, giving a substantial side wall that supports typical drawer loads while keeping material weight manageable on installation days. Each side is 3.375 inches high, setting a uniform drawer side height that simplifies layout when lining up drawer fronts across a cabinet run. The 29.125 inch length creates a ready-to-cut blank for many common drawer depths, so installers can trim to final size without rough milling. The sides are made of rubberwood, providing a stable hardwood substrate that works cleanly with joinery and machining. A UV finished surface is already applied, so the material arrives with a clear, consistent appearance ready for drawer box assembly.
These drawer side blanks are identified as dovetail, so the dimensions are suited to integrate into dovetail-style drawer box construction where side thickness and height must remain consistent for the joint to lock properly. The .625 inch thick profile supports standard dovetail layouts, giving enough material for pins and tails to hold without overbuilding the side wall. With a 3.375 inch height, the sides deliver a predictable reference dimension when setting jig positions or CNC programs for dovetail cutting runs. The 29.125 inch length provides flexibility to cut multiple drawer depths from the same blank, helping keep setups efficient during production. The rubberwood UV finished construction means the sides bring together structural hardwood and a clear finished surface, supporting both machining accuracy and a clean interior look in the completed drawer.
These Riptide drawer side blanks sit in the drawer construction systems category as drawer blanks, so they are intended as the side components of cabinet or furniture drawer boxes in woodworking shops. With a manufacturer part number DRWE_D_3.3750X29.1250 and a description calling out drawer side dovetail, they are oriented to dovetail drawer assemblies where the side dimensions need to match layout tooling. The .625 inch thickness and 3.375 inch height give a consistent profile for drawer sides across multiple units in a project, which aligns well with production cabinet runs and repeat-casework builds. Rubberwood as the material brings a hardwood structure suitable for interior drawer sides, while the UV finished clear surface keeps the drawer interior visually uniform. Sold in pallet quantities only, this item best matches operations building drawers at volume, where a single specification for height, thickness, and length can serve many cabinet openings.
The defined 3.375 inch height keeps drawer side alignment predictable relative to drawer fronts and cabinet openings, so installers can work from a known side dimension when laying out face positions. The .625 inch thickness works with dovetail joint geometry and typical slide clearances, which helps maintain consistent fit when drawers are installed into casework. At 29.125 inches long, each blank can be ripped or crosscut to match several drawer depths, reducing stock variation while still meeting individual cabinet requirements. The UV finished clear surface on the rubberwood means the sides arrive with a ready appearance, which supports continuous production by limiting separate finishing stages on drawer interiors. Because these drawer side blanks are sold in pallet quantities only, shops can align a large portion of their drawer work to one standard component, promoting uniform drawer box construction and a steady workflow.
The drawer sides are .625 inch thick, 3.375 inches high, and 29.125 inches long, so drawer boxes can be sized from a consistent profile across multiple cabinet openings.
The drawer side blanks are made of rubberwood, giving a stable hardwood structure that handles machining and dovetail joinery well in drawer box construction.
The sides are UV finished with a clear surface, so the drawer interior presents a uniform appearance and does not need a separate clear coat step.
These drawer sides are identified as dovetail with .625 inch thickness and 3.375 inch height, which support standard dovetail drawer layouts and repeatable joint geometry.
Pallet-quantity drawer sides align with high-volume shop or project work, where many drawers share the same thickness, height, and material specification.
The part number DRWE_D_3.3750X29.1250 reflects a Riptide drawer side blank sized at 3.375 inches high by 29.125 inches long for dovetail-style drawer construction.
The Riptide drawer sides .625 inch thick, 3.375 inches high, and 29.125 inches long give shops a standardized component for drawer construction. With rubberwood UV finished material and dovetail-oriented dimensions, these pallet-quantity drawer side blanks support repeatable drawer box production across cabinet or casework projects.
Sold In: 826 Each