SurfPrep 80 grit sanding pad is a 7 inch x 3 inch x 1/2 inch aluminum oxide abrasive pad designed for hand sanding tasks where a rectangular block format helps keep surfaces flat. The 80 grit rating provides a relatively coarse cut that removes material efficiently, which matters when leveling surfaces or refining machine marks before moving to finer grits. The aluminum oxide abrasive works as the cutting surface, so each stroke delivers consistent abrasion across the pad. The 7 inch length offers a workable span for covering broader areas, while the 3 inch width keeps the pad easy to control along edges and narrow parts. The 1/2 inch thickness gives the pad body, which supports comfortable hand pressure during repeated sanding passes over wood or similar workpieces.
This SurfPrep aluminum oxide sanding pad uses its 7 inch by 3 inch rectangular footprint to track along work surfaces in a predictable path, which helps maintain even contact as you move with the grain or along an edge. The 1/2 inch thickness defines how the pad fills the hand, which affects how pressure is spread as you sand profiles, edges, or flat faces. Its 80 grit rating determines how quickly it cuts during hand passes, which matters when blending machine-sanded areas or cleaning up small imperfections. As part of the abrasives and hand sanding category, the pad fits workflows that rely on controlled manual abrasion where direct feel between hand and surface guides the sanding process.
The SurfPrep 80 Grit 7 inch x 3 inch x 1/2 inch Aluminum Oxide No Hole Sanding Pad belongs to the abrasives and hand sanding class, so it is suited to tasks where a manually guided pad shapes or refines surfaces. Its 7 inch length allows longer strokes across flat workpieces, which supports smoothing face frames, rails, or panels. The 3 inch width keeps the pad narrow enough to follow edges and smaller components, which matters when sanding parts that do not match wider abrasive formats. The 1/2 inch thickness provides a defined sanding block profile, which helps the pad back the abrasive as you work across joints and transitions. With an 80 grit aluminum oxide surface, the pad delivers material removal appropriate to intermediate shaping or surface preparation steps.
The SurfPrep aluminum oxide abrasive surface on this pad defines the cutting action, which helps maintain a predictable scratch pattern from one project to the next. The 80 grit level sets the roughness of that pattern, so each pass leaves a surface that can transition logically to finer grits in a finishing sequence. The 7 inch x 3 inch footprint determines how the pad bridges over highs and lows, which supports more uniform sanding compared with very small blocks that may track irregularities. Its 1/2 inch thickness stabilizes the abrasive layer, which affects how pressure from the hand is transmitted into the workpiece without sharply concentrating force at a single point. The SP3X7HLF080 manufacturer part number identifies this exact grit and size combination, which matters when repeating a proven setup across crews or locations.
The SurfPrep 80 Grit 7 inch x 3 inch x 1/2 inch Aluminum Oxide No Hole Sanding Pad measures 7 inches long, 3 inches wide, and 1/2 inch thick, which sets the sanding contact area and block profile in hand use.
The 80 grit rating on this SurfPrep sanding pad defines it as a relatively coarse abrasive, which supports material removal and surface leveling before progressing to finer sanding stages.
This SurfPrep sanding pad uses aluminum oxide as the abrasive material, which provides the cutting action during hand sanding strokes across the work surface.
The 7 inch by 3 inch size gives a balance between coverage and control, which lets the pad span wider areas yet still follow edges and narrower components during hand sanding.
The 1/2 inch thickness defines the block-like body of the pad, which helps distribute hand pressure over the abrasive surface while maintaining a firm backing during sanding.
The SP3X7HLF080 part number corresponds to this SurfPrep 80 grit 7 inch x 3 inch x 1/2 inch aluminum oxide no hole sanding pad, which aids in selecting the same pad again.
The SurfPrep 80 Grit 7 inch x 3 inch x 1/2 inch Aluminum Oxide No Hole Sanding Pad offers a defined combination of grit, size, and thickness that aligns with hand sanding tasks. At Wurth Baer Supply, this pad is available under part number SP3X7HLF080, so crews can specify this exact SurfPrep aluminum oxide sanding pad whenever they need a rectangular 80 grit hand sanding option that supports consistent surface preparation steps.
Sold In: 1 Box