Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3D invisible hinge 1418 describes a Peter Meier, Inc. hinge designed to stay hidden while controlling door movement, which matters when a clean, uninterrupted surface is required along walls, panels, or casework using concealed hardware.
The hinge belongs to the Invisible Hinges product class and fits the Hinges|Invisible and Recessed Hinges category, so it works where a recessed, concealed pivot is preferred instead of a visible butt hinge on door edges and frames.
Manufactured from zinc, the hinge body uses a metal construction that supports repeated door cycles in typical woodworking and architectural millwork environments where metal components are expected to handle mechanical loads.
The model 1418 hinge has a total length of 150mm and a width of 30mm, giving installers defined mortise dimensions that help when routing or machining consistent pockets across multiple doors and frames.
The hinge is silver painted, so its finish presents a neutral metallic tone wherever parts of the hinge are visible in the recess, aligning with projects that favor a silver appearance around routed hinge pockets.
The manufacturer part number C1418SIL identifies this specific 3D invisible hinge configuration, which helps buyers match documentation, drawings, or reorders to the same hinge size, finish, and adjustment capability across projects.
The hinge's suitability for doors of 35mm minimum thickness means door leaves need that thickness to host the routed pocket, which maintains edge integrity around the mortise once the 150mm by 30mm hinge body is recessed.
The capability to install cladding up to 18mm thick allows an additional surface layer over the core door without conflicting with the hinge articulation, so installers can design doors with surface panels while retaining smooth hinge motion.
With 3D adjustments integrated, the hinge offers adjustment in three directions, letting installers refine door position relative to the frame so reveals, flushness, and closing action can be brought into alignment after fastening.
The 150mm total length and 30mm width provide fixed hinge geometry, simplifying template fabrication and repetitive routing tasks when multiple doors in a project require the same concealed hinge layout and pocket dimensions.
The load capacity up to 220 lbs with 3 hinges defines a weight range for door constructions supported by three of these hinges, guiding how heavy doors can be designed while staying within the hinge system's rated capacity.
The 3D invisible hinge 1418 from Peter Meier, Inc., classified under Invisible Hinges, fits projects where concealed, recessed hardware is preferred, such as flush doors in woodworking, cabinetry, or architectural panel systems requiring hidden pivot points.
The hinge's ability to allow installation of cladding up to 18mm thick makes it suitable for doors that receive applied panels or facings, letting designers build layered fronts without compromising hinge geometry or door articulation.
Its suitability for doors of 35mm minimum thickness aligns with solid or engineered door constructions that provide enough material to route a 150mm by 30mm cavity while keeping sufficient strength around the mortised area.
The silver painted finish supports use where a silver tone is desired around routed pockets or hinge edges, so exposed recesses maintain a coordinated appearance when doors are opened or inspected from the hinge side.
The load capacity up to 220 lbs with 3 hinges positions this hinge for heavier doors within that rating, such as solid-core doors or dense panel assemblies, allowing substantial weight while using three hinges per door.
Within the Hinges|Invisible and Recessed Hinges category, this model serves as a concealed alternative to surface-mounted hinges, enabling projects that require minimal visual hardware interruption on door faces and frames.
The hinge's 3D adjustments enable fine-tuning in three directions, so after installation, doors can be shifted to correct for small drilling or routing deviations, reducing rework when aligning reveals and closing action across multiple openings.
The fixed total length of 150mm helps standardize hinge spacing along the door, letting installers pattern hinge positions consistently from top and bottom edges, which improves repeatability across identical or mirrored door sets.
The 30mm width influences how much door edge material remains around the mortise, supporting a balance between concealed hardware and structural edge strength when working with the 35mm minimum door thickness.
Manufacture from zinc provides a metal hinge structure that carries door loads through its links, supporting the rated capacity up to 220 lbs with 3 hinges and helping doors operate within that load range over time.
The ability to carry up to 220 lbs with 3 hinges informs hinge count on a typical door, so three of these hinges can support substantial door weight within that specified rating while maintaining concealed articulation.
The cladding capacity up to 18mm interacts with the hinge's geometry, allowing added surface layers without binding, which helps keep door movement smooth when designers specify thicker decorative or protective panels on the door face.
The product's identity as model 1418 with part number C1418SIL gives specifiers and installers a precise reference when coordinating drawings, purchase entries, or replacements, maintaining consistency of hinge size, finish, and adjustment features.
The 3D invisible hinge 1418 is suitable for doors of 35mm minimum thickness, so door constructions need at least that thickness to hold the 150mm by 30mm recessed hinge pocket.
The hinge allows installation of cladding up to 18mm thick, which supports applied panels or facings on the door surface without interfering with the hinge's concealed movement.
The C1418SIL invisible hinge has a load capacity up to 220 lbs with 3 hinges, supporting heavier door assemblies within that weight rating.
The hinge has a total length of 150mm and a width of 30mm, giving clear mortise dimensions for routing or machining door and frame pockets.
The hinge's 3D adjustments provide three-directional adjustment, allowing fine-tuning of door alignment and reveals after the hinge is mounted in the recessed pockets.
The model 1418 hinge is manufactured from zinc and is silver painted, combining a metal body with a silver finish that coordinates with other silver-toned components.
The 3D invisible hinge 1418 from Peter Meier, Inc., with part number C1418SIL, pairs a 150mm by 30mm zinc body with 3D adjustments, cladding capacity up to 18mm, and suitability for 35mm minimum door thickness.
For projects needing concealed hardware and doors up to 220 lbs when using 3 hinges, this silver painted invisible hinge offers defined dimensions and adjustment capability that support precise recessed installation.
Sold In: 1 Each
