Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3D invisible hinge 1418 gives you a concealed hinge solution that stays hidden while supporting heavy doors. The hinge is manufactured from zinc, so the body offers a solid, consistent base for routing precise mortises in the door and frame. Its satin nickel plated finish provides a clean, neutral appearance at the small visible edges, which suits a wide range of interior styles. The hinge has a total length of 150mm and a width of 30mm, giving you a defined footprint that helps with accurate layout on thicker doors. It is suitable for doors of 35mm minimum thickness, so it pairs well with substantial interior doors. The design allows you to install cladding up to 18mm thick, which lets you bring panels or cladding flush to surrounding surfaces while the hinge stays concealed. This hinge belongs to the invisible hinges product class.
This 3D invisible hinge has a total length of 150mm and a width of 30mm, so installers can route consistent pockets in both the door and frame. It is suitable for doors of 35mm minimum thickness, which aligns with many solid or engineered interior doors. The design allows installation of cladding up to 18mm thick, enabling panel overlays without exposing the hinge. 3D adjustments built into the hinge let you fine-tune alignment in three dimensions, which helps correct small layout or routing variances after hanging the door. The hinge offers a load capacity up to 220 lbs with 3 hinges, so projects can use three of these hinges to support heavy doors while maintaining an invisible installation.
The 3D invisible hinge 1418 is suitable for doors of 35mm minimum thickness, positioning it for use on substantial interior doors rather than thin cabinet doors. Its ability to handle cladding up to 18mm thick means it works well on doors or panels that receive an applied face, such as decorative cladding or wall panel systems, while keeping the hinge concealed. The hinge length of 150mm and width of 30mm create a sizeable anchor in the door edge and frame, which is useful when doors carry the higher loads associated with thicker construction. With a load capacity up to 220 lbs with 3 hinges, this model serves applications where a heavier door must move smoothly yet remain visually clean when closed.
The hinge provides 3D adjustments, giving installers the ability to adjust the door position along three axes after mounting. This helps align the door flush with surrounding panels and frames when cladding up to 18mm thick is used, reducing the need to rework mortises. The 150mm by 30mm hinge body sets a repeatable reference for routing pockets, and the 3D adjustments let you correct small inconsistencies between those pockets once the door is hung. Because the hinge is manufactured from zinc, the body offers consistent geometry for both the routing template and the moving parts that deliver these adjustments. The satin nickel plated finish on the hinge contributes a stable surface at any small visible points, supporting a finished appearance while you focus on dialing in margins through the 3D adjustment range.
The 3D invisible hinge 1418 is suitable for doors of 35mm minimum thickness, which positions it for thicker interior doors that need a concealed hinge solution.
The 150mm total length and 30mm width define the routing pocket size, helping installers set up consistent mortises in doors and frames for repeatable hinge placement.
The 3D adjustments on this hinge allow fine-tuning of door alignment in three directions, helping bring the door flush with the frame after installation.
This hinge offers a load capacity up to 220 lbs with 3 hinges, so three hinges can support heavier doors while maintaining a concealed installation.
The hinge allows installation of cladding up to 18mm thick, enabling applied panels to sit flush while the hinge stays hidden behind the door and frame.
The hinge is manufactured from zinc with a satin nickel plated finish, providing a solid body and a neutral metallic look at any visible edges.
The 3D invisible hinge 1418 combines a 150mm by 30mm footprint, 3D adjustments, and suitability for 35mm minimum door thickness, so it adapts well to heavier, flush-mounted doors. Its ability to work with cladding up to 18mm thick supports clean, uninterrupted surfaces on finished projects. With a load capacity up to 220 lbs when using 3 hinges, it handles demanding door weights while remaining concealed. For projects where the goal is a hidden hinge with precise alignment and a satin nickel plated finish, this hinge offers a defined set of dimensions and performance characteristics to work from.
Sold In: 1 Each
