Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3D invisible hinge 1450 from Peter Meier, Inc. is a zinc 3D invisible hinge designed to carry doors while keeping the hardware concealed, which helps deliver a clean, uninterrupted door surface on finished projects. The hinge is manufactured from zinc, providing a solid metal body that supports its stated load capacity in normal door applications. Its total length of 130mm and width of 30mm define a compact hinge footprint, which allows it to fit neatly into routed pockets while supporting the door leaf. This hinge offers 3D adjustments, so the door position can be tuned in three directions to improve alignment between the door and frame. It is suitable for doors of 35mm minimum thickness, which targets typical interior and cabinet-style door builds. The hinge is finished in brushed bronze, which provides a warm metallic appearance at exposed edges on the door and frame.
This Peter Meier, Inc. 3D invisible hinge is suitable for doors of 35mm minimum thickness, which aligns with many solid and engineered door constructions and supports secure mortising around the hinge body. The hinge allows installing cladding up to 10mm thick, so applied panels within that thickness range can be added to the door while staying compatible with the hinge geometry. With a 130mm length and 30mm width, the hinge establishes clear routing dimensions, helping installers set up jigs for repetitive door and frame pocket cutting. Combining these measurements with the hinge's 3D adjustments lets the door be positioned accurately after installation so reveals and faces can be tuned without reworking the mortises.
The 3D Invisible Hinge, Model 1450, Brushed Bronze 130mm x 30mm is part of the Invisible Hinges product class, positioning it for applications where concealed hardware is required and door faces must remain visually clean when closed. Its suitability for doors of 35mm minimum thickness means it is intended for doors built to that or greater thickness, so the mortise can house the hinge body while leaving surrounding material. The ability to install cladding up to 10mm thick supports doors that receive an additional panel layer within that thickness range, allowing designers to apply decorative or protective faces while staying within the hinge's functional limits. Load capacity up to 176 lbs with 3 hinges provides a defined upper door weight when three of these hinges are used, guiding hinge count on projects within that weight range.
The 3D adjustments on this hinge allow the installer to fine-tune door position after the mortise pockets are cut, providing the ability to shift the door in multiple directions to align reveals and faces without reshaping sockets. In practical terms, these adjustments help bring the door flush to surrounding panels and manage clearances when site conditions or routing tolerances create small variances. The hinge's load capacity up to 176 lbs with 3 hinges establishes a clear performance reference, supporting heavier doors that fall within that limit so the hinges can carry the door weight appropriately when three units are used. Being manufactured from zinc gives the hinge a metal construction that works with this specified load range, contributing to the hinge's role in normal door opening and closing. The brushed bronze finish defines the color tone of exposed portions of the hinge, supporting projects that coordinate finish across visible hardware components.
The 3D invisible hinge, model 1450, is suitable for doors of 35mm minimum thickness, which positions it for doors built at or above that thickness for secure mortising.
The 3D invisible hinge, model 1450, has a load capacity up to 176 lbs with 3 hinges, setting a clear upper door weight when using three units on one door.
The 3D Invisible Hinge, Model 1450, has a total length of 130mm and a width of 30mm, giving installers defined mortise pocket dimensions.
The 3D invisible hinge, model 1450, provides 3D adjustments, enabling the door position to be tuned in three directions for alignment after the mortises are cut.
The 3D invisible hinge, model 1450, allows installing cladding up to 10mm thick, supporting doors that receive an additional panel layer within that thickness.
The 3D invisible hinge, model 1450, is manufactured from zinc and finished in brushed bronze, defining both its metal construction and visible color tone.
The 3D Invisible Hinge, Model 1450, Brushed Bronze 130mm x 30mm from Peter Meier, Inc. combines a zinc body, 3D adjustments, and a 176 lb load capacity with 3 hinges to support concealed door designs. Its suitability for 35mm minimum door thickness and allowance for cladding up to 10mm thick help match this hinge to doors built within those ranges. The defined 130mm length and 30mm width give clear routing targets for repeatable mortises across multiple doors. For projects requiring an invisible hinge with brushed bronze finish and these specific performance details, this model provides a focused option.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Kit |  CMML50-CY-BR Mfr# ML50-CY-BR | Magnetic Door Lock Kit, Cylinder Type, Polished Brass, ML50-CY-BR |
