Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3D invisible hinge 1450 from Peter Meier, Inc. is a zinc hinge designed for concealed door installations where a clean look is needed. The hinge belongs to the invisible hinges product class, so it lets doors operate normally while keeping the hardware out of sight when the door is closed. The matte black painted finish on this hinge helps it visually blend with dark cladding and door edges, which matters when the hinge side may be visible in certain open positions. Its 130mm x 30mm size defines the mortise dimensions in the door and frame, giving installers a fixed footprint to work from for routing or drilling. As part of the Hinges | Invisible and Recessed Hinges category, it is intended specifically for recessed mounting, supporting applications where the hinge body needs to sit flush in the door and jamb for a smooth, unobtrusive installation.
The hinge is suitable for doors of 35mm minimum thickness, which defines the door construction needed to house the recessed body without compromising strength. This minimum thickness guides material selection for solid or laminated doors in joinery shops. The ability to install cladding up to 10mm thick means the hinge geometry accommodates additional facing material over the door core, valuable where decorative panels or wall cladding are applied over a structural substrate. The 130mm length and 30mm width provide fixed cavity dimensions for both door and frame, allowing installers to set up jigs or CNC programs around those values. Because the hinge is part of the invisible and recessed hinges category, it is intended to sit fully in routed pockets, aligning door and jamb surfaces for a flush, modern look.
This 3D invisible hinge, model 1450, fits projects that call for concealed hardware in doors built from at least 35mm thick material. That minimum thickness allows the zinc hinge body to recess into the edge without weakening the door. Installations that add cladding up to 10mm thick benefit from the hinge geometry, since it is described as allowing cladding of that thickness, supporting doors and panels that receive applied decorative skins. The 130mm x 30mm size suits medium-length hinge layouts on interior or architectural doors within the hinge's load capacity when three hinges are used, up to 176 lbs, so planners can match hinge quantity to door weight in this range. Because it sits in the invisible hinges category, it fits applications where a traditional surface butt hinge would conflict with a flush, minimalist design.
The hinge offers 3D adjustments, giving installers the ability to fine-tune door alignment in three planes after the mortises are cut. This adjustability reduces rework when small variations in routing or door weight affect the way the door hangs. Being manufactured from zinc provides a stable base for these adjustments, supporting repeated tweaks without changing the hinge body footprint. The stated load capacity up to 176 lbs with 3 hinges sets a clear working range for door weight, helping designers and installers select an appropriate hinge count for doors built around this hinge. Matte black painted finish contributes not only to appearance but also to consistent edge detailing when the door is open, as the visible portions align with dark frames or cladding. Overall, the fixed 130mm x 30mm size, 3D adjustments, and load rating combine to support predictable, repeatable setups across multiple openings in the same project.
The 3D invisible hinge, model 1450, suits doors with a minimum thickness of 35mm, so door cores and edges are built thick enough to house the recessed hinge body securely.
The 3D adjustments on this hinge allow fine-tuning of the door in three directions after mounting, which helps achieve even gaps and smooth closing without altering the mortises.
The 3D invisible hinge, model 1450, has a load capacity up to 176 lbs with 3 hinges, guiding hinge quantity for doors built within that overall weight range.
The C1450BLK hinge has a total length of 130mm and a width of 30mm, establishing consistent mortise dimensions for both door edge and frame.
This hinge allows installation with cladding up to 10mm thick, so decorative panels or wall skins can be applied over door cores while keeping door movement aligned.
The hinge is manufactured from zinc with a matte black painted finish, combining a solid hinge body with a dark surface that suits modern or dark-trim layouts.
The 3D invisible hinge 1450 in matte black painted finish brings together zinc construction, 130mm x 30mm sizing, and 3D adjustments for concealed door work. Its suitability for doors of 35mm minimum thickness and allowance for cladding up to 10mm support modern flush-wall and panelled layouts using heavier doors in this range. With a load capacity up to 176 lbs using 3 hinges, it fits many architectural and interior door assemblies planned around that weight. For projects needing a concealed hinge with defined dimensions and on-site adjustability, this C1450BLK model from Peter Meier, Inc. is a focused option to specify and deploy consistently.
Sold In: 1 Each
