Riptide drawer sides 7 inch 47.25 inch 47.25 inch length units provide a consistent starting point for building drawer boxes where a 7 inch side height is needed. The drawer side blanks are part of the Riptide Drawer Construction Systems line, so they are designed specifically as drawer side blanks rather than general stock. Each piece has a stated thickness of 0.625 inch, giving a known side wall dimension that supports planning clearances and layout across a run of cabinets. The 7 inch height lets the installer target medium-height drawer boxes from a single blank without additional edging on the top edge. The 47.25 inch length gives enough material to cut multiple sides for smaller drawers or one long side for wider applications. A dovetail designation in the description indicates the blanks are prepared for dovetail-style drawer construction, aligning the product with dovetail drawer box workflows.
The drawer side blanks use a 0.625 inch thickness, so that wall size can be carried through the entire drawer box layout for consistent joinery and hardware positioning. The 7 inch height forms a fixed side dimension that simplifies planning drawer opening sizes and overlay relationships. Each blank measures 47.25 inches in length, which offers enough material to cut multiple sides and still keep the grain direction along the drawer length. The material is rubberwood, so the wood species is known when coordinating with other rubberwood components in a shop. A UV finished description indicates the surfaces are treated at the factory, giving the installer a prefinished rubberwood side for drawer construction where a clear appearance is desired.
The product sits in the drawer construction systems and drawer blanks category, placing it in shop workflows focused on building drawer boxes rather than general carcass parts. As drawer side blanks, these pieces form the vertical sides of the drawer box, working with separate materials for fronts, backs, and bottoms. The 7 inch height lines up with applications where a medium-height drawer is preferred, such as many base cabinets and storage drawers. The 47.25 inch length works in cabinet shops that cut multiple same-size drawer sides from a single blank, supporting consistent part production. Because the blanks are rubberwood with a clear UV finished description, they fit projects where a rubberwood interior is planned and a clear, factory-treated surface is used as the drawer interior face.
The SAP description notes drawer side dovetail 7x47.25, tying these blanks directly to dovetail drawer box construction where accurately sized sides are important for joint fit. With a thickness of 0.625 inch, dovetail tooling and drawer layouts can be set up around this material size, which supports repeatable joints across multiple drawers. The 7 inch height provides a consistent vertical dimension for aligning dovetails at the top and bottom edges, which helps keep drawer fronts and backs matched across a bank. The 47.25 inch length means side parts can be nested for cutting so that dovetail machining sees the same rubberwood stock from part to part. The UV finished rubberwood surface gives a ready-to-use clear look on the interior faces of dovetail drawers, reducing finishing steps on the inside while keeping the dovetail joints visually tied to the same rubberwood species.
These pieces are Riptide drawer side blanks in the drawer construction systems category, so they serve specifically as the side components in drawer box assemblies.
Each drawer side blank is described as 0.625 inch thick, 7 inch height, and 47.25 inch length, which sets the wall, vertical, and cut length dimensions for drawer layouts.
The drawer sides are made of rubberwood with a UV finished description, giving a clear, factory-treated surface on the rubberwood material for drawer interiors.
The SAP description notes drawer side dovetail 7x47.25, indicating the blanks are intended for dovetail-style drawer construction where uniform side stock benefits joint setup.
The 7 inch height provides a fixed side dimension for planning drawer storage depth and aligning drawer fronts across cabinets using the same side height.
Part number DRWE_D_7X47.25 identifies Riptide rubberwood drawer side blanks in 0.625 inch thickness, 7 inch height, and 47.25 inch length for ordering and layout consistency.
The Riptide DRWE_D_7X47.25 drawer side blanks provide 0.625 inch thick, 7 inch height, 47.25 inch length rubberwood components dedicated to drawer construction systems. The UV finished clear description supports drawer interiors that use factory-treated rubberwood surfaces. The dovetail designation in the description aligns these blanks with dovetail drawer box builds where matching side stock and consistent sizing matter. For projects built around rubberwood drawer construction, these drawer side blanks offer a defined size set that can be repeated across multiple cabinet runs.
Sold In: 236 Each