
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Roman ogee router bit from Amana Tool cuts a classic convex curve off the bearing, so every pass produces a consistent Roman ogee profile that finishes edges with a defined shape that does not drift during work. This router bit belongs to the edgeforming router bit class, so it is built specifically to shape exposed edges instead of bulk stock removal, which helps keep profiles uniform across multiple parts on cabinetry or trim runs. Diameter of 1-3/8 inch sets the overall scale of the profile, which keeps the cut substantial enough for doors and shelves without overwhelming smaller workpieces. A 1/4 inch radius controls the curvature of the ogee, which keeps the detail tight and crisp for visible furniture and casework edges. Two flutes on the cutting portion provide a balanced cut, which supports smoother feed and cleaner surface finish on typical woodworking materials.
1/2 inch shank on this Amana Tool Roman ogee router bit fits into router collets sized for that diameter, creating a firm grip that supports accurate edgeforming runs. Use in either hand held or table mounted routers allows the bit to serve in different shop setups, so it can route edges with the router guided along the work or with the work guided along a router table fence. Overall length of 2-5/8 inch gives adequate projection for typical collet insertion depth while still leaving sufficient shank engaged, which supports solid control during routing. Cutting height of 13/16 inch defines how much of the bit must be exposed above the base or table surface, which helps determine fence and height adjustments when dialing in the full Roman ogee profile along cabinet or furniture edges.
Roman ogee router bit design with a convex curve coming off the bearing is intended to shape decorative edges, so it works well wherever a defined profile is needed along exposed boards. Diameter of 1-3/8 inch and radius of 1/4 inch create a mid-size Roman ogee that suits cabinet doors, drawer fronts, and furniture tops, giving enough visual depth without overwhelming narrow rails or stiles. Cutting height of 13/16 inch lets the full detail develop on common stock thicknesses, so one pass can establish the complete profile along the edge of casework or shelving. Use in either hand held or table mounted routers gives flexibility for shop or site work, enabling routing with portable tools on large panels or more controlled passes on a router table for smaller parts.
Two flutes on this router bit share the cutting action around the 1-3/8 inch diameter, so each flute removes less material per rotation, which promotes a smoother surface that follows the intended Roman ogee curve closely. 1/2 inch shank construction increases stiffness compared to smaller shanks, helping the bit resist deflection that could soften the 1/4 inch radius detail across long edges. Cutting height of 13/16 inch gives a clear visual reference when setting bit exposure, making it easier to match profiles between different workpieces by aligning the same portion of the edge to the bit. Overall length of 2-5/8 inch keeps the center of mass closer to the collet, which supports stable rotation at routing speeds normally used for 1-3/8 inch diameter bits. Replacement bearing 47704 is specified for this bit, so the guided cutting action off the bearing nose can be maintained over time, keeping the profile location consistent relative to the workpiece edge.
This Amana Tool Roman ogee router bit has a convex curve coming off the bearing, so it cuts a classic Roman ogee edge that adds a shaped contour along exposed board edges.
The router bit has a 1-3/8 inch diameter, 1/4 inch radius, and 13/16 inch cutting height, which together define a mid-size Roman ogee suitable for many cabinet and furniture edges.
The bit has a 1/2 inch shank and is specified for use in either hand held or table mounted routers, so it fits routers with a 1/2 inch collet in both setups.
The 2-flute design of this edgeforming router bit balances cutting around the circumference, helping the Roman ogee profile track smoothly and leave a cleaner finish on routed edges.
The Amana Tool 49206 Roman ogee router bit has an overall length of 2-5/8 inch, offering working reach while maintaining shank engagement in the router collet.
This router bit lists replacement bearing 47704, so the guided cutting action off the bearing can be maintained, keeping the Roman ogee profile consistently located along the workpiece edge.
Choose this Amana Tool Roman ogee router bit when a 1-3/8 inch diameter, 1/4 inch radius edgeforming profile matches your cabinet, furniture, or trim layout, because those fixed dimensions define how the ogee will appear across every routed edge. The 1/2 inch shank, 13/16 inch cutting height, and 2-5/8 inch overall length work together to support stable installation in routers sized for this bit, which helps keep the Roman ogee detail consistent from one workpiece to the next on production or custom jobs.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AA47704 Mfr# 47704 | 1/8" x 3/8" Steel Ball Bearing Guide |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AA49204 Mfr# 49204 | Roman ogee router bit 1/4 shank 49204 | ||||
Sold in: 1 Each | AA49202 Mfr# 49202 | Edge Forming Roman Ogee with Ball Bearing Guide 2-Flute 5/32" Radius x 1" Dia x 5/8" x 1/2" Shank | ||||
Sold in: 1 Each | AA49200 Mfr# 49200 | Edge Forming Roman Ogee with Ball Bearing Guide 2-Flute 1" Diameter, 1/4" Shank, 2-1/8" Length |