97" x 3" Radius J-Molding

97 x 3 Radius J-Molding For Cabinet Ends

97 x 3 Radius J-Molding from Lakewood is a machined medium density fiberboard (MDF) molding designed to add a smooth, consistent radius at the ends of two parallel cabinet panels. The 3 inch radius detail pulls the panel ends into a curved profile instead of a sharp termination, which helps create a more finished, furniture-style edge on cabinet runs. This J molding is sized for 3/4 inch panels, so it matches common cabinet side thicknesses and helps keep layout straightforward during fabrication. At 97 inches in length, it spans tall or multiple cabinet sections, which reduces joint breaks along the radius line and supports a cleaner visual flow on long runs.

Key Radius J-Molding Details For Fabricators

• This Lakewood J molding is machined MDF, not formed, which provides a uniform cross-section that tracks consistently around the 3 inch radius and supports predictable trimming and edge preparation during fabrication.
• The design is specifically described as J Molding that adds a radius at the ends of two parallel panels, which lets you build rounded cabinet ends without changing the basic straight-panel construction method used in your casework.
• The molding is suitable for painting or laminating over, so you can match painted cabinet finishes or overlay high-pressure laminate as part of a coordinated surface system on your cabinet faces.
• Different models in this Lakewood radius molding line accept either 5/8 inch or 3/4 inch panels, which allows selection around your standard carcass thickness so the radius detail stays flush with adjacent panel surfaces.
• Radius moldings in this series are available in 2, 3, 4, and 6 inch radius options, giving flexibility to align the curve size with the cabinet style, from tighter contemporary corners to larger, softer transitions.

Radius J-Molding Fit, Length, And Finish Options

This Lakewood 97 inch x 3 inch MDF J molding is part of a radius molding system that covers multiple radius sizes and panel thicknesses, which supports planning consistent end details across a project. The machined MDF construction provides a stable substrate for paint or laminate, so finishing follows the same steps used on flat MDF parts. Because this J molding is designed for the ends of two parallel panels, layout follows standard casework spacing while shifting only the terminal edge to a 3 inch radius, which helps maintain alignment with doors, drawer fronts, and toe spaces built off the same panel grid.

Using This J-Molding In Cabinet Projects

Where This Lakewood J-Molding Works Best

This Lakewood radius J molding is designed to add a radius at the ends of two parallel panels, which suits exposed cabinet ends on runs where a square edge would look abrupt. Cabinet fabricators can use the 3 inch radius profile to soften the ends of base or tall cabinets while keeping the internal construction based on straight 3/4 inch panels. Because the molding is part of a radius molding family with 2, 3, 4, and 6 inch radius choices, it can be specified wherever a coordinated set of curved corners is desired across a bank of cabinets. The 97 inch length supports vertical or horizontal applications that need a long, uninterrupted radius line along the panel edge.

Details That Support Consistent Radius Results

The J-MLDNG,3'RADIUS-3/4'MDF description identifies that this model accepts 3/4 inch panels and has a 3 inch radius, which gives clear dimensional cues for cabinet layout and panel cutting. Machined (not formed) MDF construction keeps the profile consistent along the full 97 inch length, which helps routing, sanding, and edge finishing behave the same from one end to the other. Because the molding is suitable for painting or laminating over, fabricators can run their standard MDF finishing workflow on the curved surface, supporting uniform color and sheen between flat panels and the radius end. The J-style geometry focuses the curve at the ends of parallel panels, which allows installers and shop crews to repeat the same end condition across multiple cabinets with predictable alignment.

Common Questions About This Radius J-Molding

Select This Lakewood J-Molding For Radius Ends

This Lakewood 97 inch x 3 inch radius J molding provides a 3 inch curved end for 3/4 inch parallel panels using machined MDF that is suitable for painting or laminating. For cabinet runs that call for smooth, consistent radius ends, this dedicated J molding model from the Lakewood radius molding series offers a straightforward way to build that detail into your casework layouts.