97" x 4" Radius L-Molding

97 x 4 Radius L-Molding For Cabinet Corners

97 x 4 Radius L-Molding from Lakewood is a machined medium density fiberboard (MDF) molding designed to create smooth, consistent radius corners between two right angle cabinet panels, which helps fabricators build flowing corners instead of sharp joints. This L molding uses a 4 inch radius, so the corner follows a controlled curve that repeats reliably across multiple cabinets in a run. It is designed for 3/4 inch panels, so it matches common cabinet side thickness and simplifies layout when building standard carcasses. Because the molding is machined rather than formed, the profile remains consistent along the full 97 inch length, which supports clean seams and predictable alignment from base to top. As a wood molding suitable for painting or laminating over, it gives shops flexibility to finish the radius to match surrounding faces or applied surfacing.

Radius L-Molding Details That Support Workflow

• The 97 inch length lets fabricators span tall cabinets or cut multiple shorter pieces from one stick, which can reduce joints along the radius and streamline cutting patterns on the bench.
• The 4 inch radius provides a defined, repeatable curve, so designers can standardize corner geometry across a project and keep layout dimensions consistent from unit to unit.
• The L shape is designed to radius the corner between two right angle panels, which turns a square intersection into a smooth transition that is easier to finish and visually soften.
• The molding is made of machined MDF, which yields a uniform surface profile that helps minimize sanding and promotes even finishing along the curve.
• The profile is suitable for painting or laminating over, allowing the same stock to support painted cabinet programs or lamination-based jobs without changing the core radius component.
• The design accepts 3/4 inch panels, aligning with a common cabinet wall thickness so panel edges and the radius molding interface predictably during assembly.

Installing Lakewood Radius L-Molding On Cabinets

This Lakewood 97 x 4 Radius L-Molding is designed to sit at the intersection of two right angle cabinet panels, so the 4 inch radius becomes the visible outside corner while the 3/4 inch panel edges register inside the profile. Because the molding is machined MDF, its consistent cross-section helps installers position it accurately along the full height, keeping the curve even from bottom to top. The 97 inch length supports layouts where one piece can cover the full vertical run on tall cabinets or be cut down for base and wall units, which simplifies planning cuts. Its surface is suitable for painting or laminating over, so once fixed in place it can receive the same finish system as adjacent faces, keeping the radius corner integrated with the overall cabinet appearance.

Using Radius L-Molding In Cabinet Fabrication

Where This MDF L-Molding Fits Best

This Lakewood wood molding, classified under radius moldings, fits where a fabricator wants a smooth transition between two perpendicular cabinet panels rather than a hard 90 degree corner. The L molding is designed specifically to radius the corner between two right angle panels, so it becomes the outside curve at cabinet ends, island corners, or similar right angle intersections that use 3/4 inch panels. With its 4 inch radius, the molding sets a specific curvature that designers can repeat across multiple cabinets and workstations, keeping corner geometry coordinated throughout a project. At 97 inches long, the part gives shops enough length to run full-height corners or yield several shorter pieces from one stick, which can help coordinate base and wall cabinet corners from the same radius stock. As part of Lakewood radius moldings, this piece fits into jobs that call for consistent curved corners within a decorative hardware and moldings package.

How Design Details Support Repeatable Results

The machined medium density fiberboard construction of this Lakewood molding means the 4 inch radius profile is cut, not formed, so the curve remains uniform along its length and supports repeatable installation results across several cabinets. Because different models in this radius molding family accept either 5/8 inch or 3/4 inch panels and offer 2, 3, 4, and 6 inch radii, the 4L34 version stands out by accepting 3/4 inch panels with a 4 inch radius, a combination that aligns with common cabinet carcass thickness and a moderate, usable curve. Being suitable for painting or laminating over lets shops apply their standard paint system or laminate on top of the MDF radius, so the finished corner visually ties into face panels or tops without needing a separate curve solution. Operating as a wood molding within decorative hardware and moldings, this component helps integrate structural corner shaping with the visual trim package, supporting consistent detailing throughout a woodworking project.

Common Questions About Lakewood Radius L-Molding

Select This Radius L-Molding For Curved Corners

This Lakewood 97 x 4 Radius L-Molding gives cabinet fabricators a machined MDF solution for creating smooth, 4 inch radius corners between two right angle 3/4 inch panels, so curved cabinet ends can match project layouts. Using a single, 97 inch Lakewood radius molding in your cut list supports consistent geometry and coordinated finishing when painting or laminating over cabinet assemblies.