97" x 3" Radius L-Molding

97 x 3 Radius L-Molding For Smooth Corners

97 x 3 Radius L-Molding from Lakewood is a machined medium density fiberboard (MDF) radius molding that creates smooth, consistent radius corners on cabinet units, so cabinet fabricators can build curved transitions instead of sharp edges on casework. This model is an L molding that is specifically designed to radius the corner between two right angle panels, which turns a standard 90-degree junction into a controlled 3 inch radius curve. The molding is suitable for painting, allowing fabricators to finish it in step with painted cabinet systems. It is also suitable for laminating over, so shops can apply decorative surfacing and carry laminate patterns cleanly around a radius. As part of Lakewood wood moldings in the Decorative Hardware & Moldings and Radius Moldings category, it fits directly into radius cabinet designs that call for machined MDF components rather than formed parts.

Radius Molding Details That Support Cabinet Work

• The 3 inch radius design shapes the corner between two right angle panels, which lets fabricators build a controlled curve instead of a sharp 90-degree corner for a softer cabinet profile.
• The 97 inch length spans tall cabinet runs or long horizontal sections in one piece, helping reduce joints along the radius so the finished corner line stays visually consistent.
• The 3 inch dimension provides a defined radius size for layout, which simplifies planning when coordinating adjacent panels and matching other Lakewood radius moldings in a project.
• The machined MDF construction delivers a precise radius profile, which supports repeatable results when multiple cabinet units need to share the same curved corner geometry.
• The molding is suitable for painting or laminating over, giving shops flexibility to match painted finishes or laminate surfacing across the radius without changing core components.

MDF Radius L-Molding Installation And Fit Use

This Lakewood L molding is designed specifically to radius the corner between two right angle panels, so installers know it is intended for standard 90-degree cabinet junctions rather than arbitrary angles. The radius molding is built for use with 3/4 inch panels, which gives fabricators a clear panel thickness target when sizing side panels, deck panels, or cabinet ends feeding into the corner. Because the molding is machined from medium density fiberboard, its consistent material structure supports clean machining of mating panels for a snug fit against the curved profile. The 97 inch length works across full-height cabinet applications or extended counter-height runs, limiting the number of field joints that need to align with the radius profile.

Using Lakewood 3L34 Radius L-Molding In Projects

Where This 3 Inch Radius L-Molding Fits Best

The Lakewood 97 x 3 Radius L-Molding with manufacturer part number 3L34 works wherever cabinet fabricators need a 3 inch radius at a corner between two right angle panels built from 3/4 inch material. In vertical applications, the full 97 inch length supports tall pantry or wardrobe-style cabinets that carry a curved front edge from top to bottom. In horizontal layouts, the same length allows a continuous radius at the front of base cabinets or upper cabinet runs, maintaining the 3 inch curve across multiple carcasses. As part of the Radius Moldings category, this L molding is one of the Lakewood options that provide defined radii of 2, 3, 4, and 6 inches, so the 3 inch version suits projects that call for a moderate, clearly defined curve instead of a tighter or looser radius. Being made of machined MDF, it fits projects where a stable fiberboard core is preferred for paint or laminate over a solid wood profile.

Why These MDF Radius Details Support Consistent Results

The fact that the molding is machined, not formed, means the 3 inch radius profile is cut directly into the MDF, which supports consistent geometry across pieces and reduces variation that can complicate panel layout. This consistency helps shops duplicate a cabinet line where every radius corner between two right angle panels matches the next, simplifying jig design and template work. The dedicated design for 3/4 inch panels reduces guesswork about panel build-up, since the molding is dimensioned for that thickness as one of the offered panel sizes across the Lakewood radius molding line. Because the molding is suitable for painting, finishing teams can treat it like other MDF components, sanding and coating the radius along with adjacent faces for a uniform appearance. When it is used as a substrate for laminating over, the defined 3 inch radius helps laminate shops plan their layup sequence and radius wrapping, keeping decorative surfaces aligned as they transition around the corner.

Common Questions About Lakewood Radius L-Molding

Selecting This 97 x 3 L-Molding For Your Run

The Lakewood 97 x 3 Radius L-Molding gives cabinet fabricators a machined MDF solution for creating 3 inch radius corners between 3/4 inch right angle panels, ready for painting or laminating. For projects that call for consistent curved cabinet corners using defined radius moldings, this 3L34 model provides a clear choice when a 97 inch length and 3 inch radius match the cabinet layout requirements.