Paper Slot Grommets One Piece Plastic - Hardware Concepts, Inc. 6307-029

Paper Slot Grommets One Piece Plastic For Clean Runs

paper slot grommets one piece plastic from Hardware Concepts, Inc. provide a defined 12 inch long opening that manages a narrow pass-through along a work surface, so installers can create a consistent slot where documents or cables transition between spaces. The 1-5/8 inch size stated in the description defines the overall profile of this grommet, which helps plan cutout dimensions and clearances around nearby components. Being a one piece plastic design means the grommet functions as a single trim component, so the slot edge looks finished while remaining straightforward to handle during installation. The product is described as plastic, which supports use in typical multimedia and workspace components where a non-metal edge is preferred around a slot. The part is identified as Hardware Concepts, Inc. 6307-029, helping match this specific grommet when repeating a detail across multiple stations or replacing existing parts built around the same profile.

Key Plastic Grommet Details That Support Layout

• The SAP description states 1PC 12" X 1-5/8" PLASTIC GROMMET ALM, which defines a 12 inch span and 1-5/8 inch overall profile, so cut locations and slot lengths can be planned consistently across a run of matching work surfaces or panels.
• The web description notes that two sizes are available, 12 inch and 17-3/8 inch long, so this 12 inch option can be chosen where a shorter slot is required and aligned with nearby hardware without overextending across the surface.
• The product is listed in the Multimedia and Workspace Components grommets category, signaling its intended role around routed openings in desks or workstations where a trim piece helps manage transitions through a narrow slot area.
• The description specifies a one piece plastic grommet, so the trim edge snaps in as a single component instead of multiple parts, which can simplify handling during fitting and reduce alignment steps once the slot opening is prepared.
• The grommet is identified as a Hardware Concepts, Inc. item with manufacturer part number 6307-029, giving a clear reference for reorders or matching existing cutouts originally laid out around this specific profile in a workspace project.

Installation Planning Using The 12 x 1-5/8 Size

The SAP description lists this part as 1PC 12" X 1-5/8" PLASTIC GROMMET ALM, so installers can base their slot layout around a 12 inch run that matches the grommet length. The 1-5/8 inch dimension in the description defines the overall body profile, helping determine how far the trim will extend across the surface and how much flat area is needed around the opening. Because it is a one piece plastic grommet, the installer aligns a single molded component to the routed slot, which streamlines positioning compared with multi-piece trims. The Multimedia and Workspace Components grommets category confirms its role in routed openings on desks or similar surfaces, so the dimensional information translates directly to common panel layouts.

Using This 6307-029 Grommet In Work Surfaces

Where This One Piece Plastic Grommet Fits Best

The product name describes paper slot grommets one piece plastic, indicating that this 6307-029 part is intended to trim a narrow slot-style opening rather than a round hole, which suits paper paths or slim cable runs across a work surface. Its placement in the Multimedia and Workspace Components grommets category ties it to desks, counters, or similar work areas where a routed opening needs a finished border. The SAP note of 12" X 1-5/8" PLASTIC GROMMET ALM defines a 12 inch span, matching applications that call for a slot long enough to pass documents or grouped conductors along an edge. The 1-5/8 inch size in that description guides how much real estate this grommet occupies on the panel, so it can be located away from joints, drawer clearances, or other hardware. Because it is made of plastic, the trim presents a non-metal edge at the slot, which suits typical office and workspace environments where a molded profile around the opening is preferred.

Why The Full Relief Groove And Length Matter

The web description states there is a full relief groove all around the overlapping trim edge, so once seated over the slot this groove allows the grommet edge to engage the panel consistently along its perimeter. That continuous groove supports a more uniform grip around the opening, which helps the trim sit flush and maintain its position during normal use of the work surface. The same description notes two length options, 12 inch and 17-3/8 inch, meaning this 12 inch version can be selected where a defined shorter run simplifies layout between fixed obstacles such as supports or equipment. The 12" X 1-5/8" sizing in the SAP description links directly to that shorter option, so the installer can match cut length to this part when repeating a detail across multiple stations. The manufacturer identification as Hardware Concepts, Inc. 6307-029 connects the relief groove and dimensional profile to a specific repeatable component, which helps maintain a consistent look and fit when the same slot treatment is used throughout a project.

Common Questions About The 6307-029 Plastic Grommet

Selecting This 12 x 1-5/8 Grommet For Projects

The SAP description identifies a 1PC 12" X 1-5/8" PLASTIC GROMMET ALM, so this part suits layouts built around a 12 inch slot and a 1-5/8 inch profile on desks or similar panels. The web description adds a full relief groove around the overlapping trim edge, giving the slot a continuous finished border once installed. With a defined manufacturer part number, Hardware Concepts, Inc. 6307-029, this grommet can be specified whenever the same slot treatment is required across multiple multimedia or workspace components.