Paper Slot Grommets One Piece Plastic - Hardware Concepts, Inc. 6307-057

Paper Slot Grommets One Piece Plastic For Clean Openings

paper slot grommets one piece plastic from Hardware Concepts, Inc. create a finished edge around elongated openings, so pass-through slots look deliberate and are easier to work around in cabinets and workstations. The 6307-057 version is described as a 1PC 12 x 1-5/8 plastic grommet in brown, which sets it up to frame a long, narrow cutout where papers, cables, or small items move through a panel. Being a one piece plastic grommet means the trim installs as a single molded unit, so the opening is ringed by an uninterrupted surface for a clean visual line. The plastic construction keeps the grommet lightweight, which helps when working in thin panels or built-ins where added weight at the opening is not desirable.

Key Plastic Grommet Details That Support Use

• The web description states that two sizes are available, 12 inches and 17-3/8 inches long, which allows the opening length to follow common cabinet or media slot dimensions for more consistent layouts between different installations.
• A full relief groove all around the overlapping trim edge is highlighted, so the grommet can nest into the cutout with a defined seating point, helping the edge sit more uniformly against the panel surface once pressed into place.
• The SAP description lists this model as 1PC 12 x 1-5/8 plastic grommet brn, so the brown color can visually blend with darker wood tones or laminate schemes where a lighter grommet would stand out against the surrounding material.
• The product is grouped under Shelf, Closet & Garage Organization and Multimedia and Workspace Components, which positions it for use in storage systems and work areas where a trimmed slot helps control how items pass through cabinet fronts or partitions.

Mounting This 12 x 1-5/8 Plastic Grommet In Panels

The 1PC 12 x 1-5/8 plastic grommet brn designation gives a clear sense of the intended opening size, so a matching slot length and width can be laid out before trimming the panel. The reference to a full relief groove around the overlapping trim edge means the outside profile is shaped to register against the panel face, so once the cutout matches the grommet profile, the part can press into position until the groove meets the edge. Because this is a one piece plastic design, the installer handles a single molded frame during fit-up, which can simplify aligning the grommet with surrounding cabinet lines while holding the part in place.

How This Paper Slot Grommet Works In Projects

Using The Brown Paper Slot Grommet In Organization

This product is identified as Paper Slot Grommets One Piece Plastic from Hardware Concepts, Inc., and it sits in the Shelf, Closet & Garage Organization category, so it is oriented toward storage and organizing applications where a narrow slot is part of the layout. The brown color tied to the 1PC 12 x 1-5/8 plastic grommet brn description gives a darker trim option for closets, shelving runs, or garage systems built in deeper tones, helping the slot frame read as part of the design. Its placement in Multimedia and Workspace Components signals that the same 12 inch profile can serve in desks or workstations that use a horizontal opening, so the grommet can visually tie a cutout into the surrounding work surface or panel system.

Relief Groove And One Piece Design For Consistent Edges

The web description notes a full relief groove all around the overlapping trim edge, which means the molded profile has a defined recess where the panel edge sits, helping the trim lip bridge minor variations in the cut while still presenting an even border. This groove running the full perimeter allows the grommet to contact the panel consistently, so the visible edge remains aligned even when the substrate varies slightly along the slot. The fact that it is described as a one piece plastic grommet means the entire frame is molded as a single unit, so each side of the slot is tied together by one component, supporting more uniform spacing and simplifying repeat installations that reuse the 12 x 1-5/8 layout.

Common Questions About The 6307-057 Plastic Grommet

Select This 12 Inch Paper Slot Grommet For Trimmed Openings

The 6307-057 Paper Slot Grommets One Piece Plastic from Hardware Concepts, Inc. combines a 12 inch length, 1-5/8 inch profile, and brown finish for elongated openings in storage or workspace projects. The full relief groove around the overlapping trim edge supports a cleaner transition between the slot and the surrounding panel, so the opening reads as an intentional part of the design. The one piece plastic construction ties the entire perimeter into a single frame, simplifying how the edge is finished whenever this profile is applied.