Plastic Shelf Supports With Steel Pins 5 mm Bore - Pro Value Series 72511 10 038

Plastic Shelf Supports 5 Mm Bore For Cabinet Use

Plastic shelf supports 5 mm bore from the Pro Value Series provide a plastic support with steel pin, giving a sturdy resting point for shelving in cabinets or storage units. The 5 mm bore fit means the pins match common 5 mm drilled holes, so installers can use standard line-bored cabinet sides without extra layout. The pin length is 5/16, so the steel pin seats solidly in the panel while leaving enough projection to carry the load on the shelf rest area. The shelf rest area measures 7/16 W x 13/32 L, creating a defined platform that holds shelf edges consistently and helps keep spacing uniform across a run of holes. The almond color aligns with almond-toned interiors, so the supports blend into casework rather than drawing attention at eye level.

Key Shelf Support Details That Save Time

• The plastic support with steel pin design places metal in the bore and plastic on the contact surface, so the pin grips the panel while the shelf rests on plastic that will not mark finished edges.
• The 5 mm bore sizing lets these Pro Value Series shelf supports match 5 mm system holes, so installers can use existing drilling patterns for quick layout and repeatable shelf locations across cabinets.
• The 5/16 pin length sets a consistent embed depth in the side panel, so each pin seats to the same depth and helps keep shelf levels even from front to back and side to side.
• The shelf rest area of 7/16 W x 13/32 L provides a defined bearing surface at the shelf edge, so weight is supported over a small platform that keeps shelves from shifting sideways under normal use.
• The almond color ties into almond-colored interiors and shelving, so the supports visually recede inside cabinets and closets and help finished installations look coordinated and clean.

Mounted Shelf Support Details For 5 Mm Bores

These plastic shelf supports with steel pins are built for 5 mm bore applications, so they press into 5 mm drilled holes used in cabinet sides or closet panels. With a pin length of 5/16, the steel pin extends deeply into the panel, so each support seats securely while still leaving room behind the face for full engagement. The shelf rest area measures 7/16 W x 13/32 L, so the resting platform sits just proud of the panel surface and gives shelves a stable ledge at each corner. Because the material is a plastic support with steel pin, the mounting relies on the rigid metal pin while the plastic body handles contact with the shelf edge.

Using Pro Value Shelf Supports In Projects

Where Almond Plastic Shelf Supports Work Best

These Pro Value Series shelf supports are part of the shelf, closet, and garage organization category, so they fit naturally into cabinet interiors, closet systems, or utility shelving layouts. The 5 mm bore requirement matches standard system holes in many casework projects, so installers can drill consistent rows and rely on the same supports throughout a job. With a pin length of 5/16, each support reaches into the side panel enough to resist pull-out in typical cabinet conditions. The shelf rest area of 7/16 W x 13/32 L offers a compact ledge that supports the front edge or corners of shelves, so both fixed and adjustable shelves sit level on matching supports.

Why These Steel-Pin Supports Help Repeatable Results

The plastic support with steel pin construction means the steel pin handles the engagement in the wood or panel, so the bore sees a firm, dimensionally stable element while the plastic body cushions the shelf. Because the supports are designed for a 5 mm bore, drill patterns can be laid out with 5 mm bits and repeated from cabinet to cabinet. The 5/16 pin length gives enough depth for the pin to lock into the material, so each support stops at a consistent position and keeps shelf heights aligned. The carefully defined shelf rest area of 7/16 W x 13/32 L sets a predictable bearing surface at the shelf edge, so installers can plan shelf depths knowing exactly where the support contacts the underside. The almond color ties together interiors using almond-toned components, so finished projects present a coordinated look across multiple cabinets or closet runs.

Common Questions About Almond Shelf Supports

Selecting 5 Mm Bore Shelf Supports For Your Job

Choose these Pro Value Series plastic shelf supports with steel pins when the project calls for a 5 mm bore and an almond interior finish. The 5/16 pin length, 7/16 W x 13/32 L shelf rest area, and plastic support with steel pin construction provide defined mounting and support geometry. Sold in full box quantities only through Wurth Baer Supply, they suit cabinet shops and installers who want consistent hardware across multiple cabinets or closet runs.