Plastic Shelf Supports With Steel Pins 5 mm Bore - Pro Value Series BA10438WH

Plastic Shelf Supports With Steel Pins 5 mm

Plastic shelf supports with steel pins 5 mm bore from the Pro Value Series provide a compact way to support cabinet or closet shelves in drilled panels. The 5 mm bore requirement matches standard 5 mm shelf pin holes, so these supports fit common line-boring patterns in cabinetry and casework using that drill size. Each support uses a plastic support body with steel pin, combining a metal anchoring pin with a formed plastic rest area where the shelf edge sits during use. The white color helps these supports blend with light-colored interiors, so the hardware remains unobtrusive once shelves are loaded. A pin length of 5/16 in. seats into the side panel hole while keeping enough length exposed to carry the molded rest, balancing hold in the bore with usable support depth for typical panel thicknesses in cabinet construction.

Key Shelf Support Details For Cabinet Work

• The 5 mm bore design matches panels drilled with 5 mm holes, so installers can use these supports directly in cabinets or closets built around metric 5 mm line-boring systems without changing drill setups.
• The plastic support with steel pin construction places the steel element inside the bore for grip while the plastic forms the visible shelf rest area, so the pin anchors in the panel as the plastic shape provides a smooth bearing surface under the shelf edge.
• The pin length of 5/16 in. sets the engagement into the panel, so the installer gains a defined penetration depth into the side wall while leaving room for the white shelf rest geometry to project inside the cabinet for load-bearing contact.
• The shelf rest area sized at 7/16 in. wide by 13/32 in. long creates a compact rectangular bearing platform, so the shelf edge sits on a measured contact patch that supports the board while staying tight to the side panel for clean layouts.

5 mm Bore Shelf Support Fit And Placement

The 5 mm bore requirement means these plastic shelf supports with steel pins 5 mm work where side panels are drilled specifically at 5 mm diameter, aligning with typical system holes in cabinet and closet construction that use that size. With a pin length of 5/16 in., the steel pin occupies a controlled depth in the hole, so the installer can position holes along the vertical line and know the support will seat consistently from cabinet to cabinet. The shelf rest area of 7/16 in. wide by 13/32 in. long defines how far the shelf bears onto the support, allowing shelf edges drilled or cut to standard depths to rest fully on the molded platform along the cabinet side.

Using White Pro Value Series Shelf Supports

Where These 5 mm Shelf Supports Are Applied

As shelf supports in the Shelf, Closet & Garage Organization category, these plastic shelf supports with steel pins 5 mm bore are suited to cabinet interiors, closet systems, and other casework using 5 mm shelf pin holes in side panels. The 5 mm bore specification ties directly to hole size in particleboard, MDF, or plywood sides drilled to that metric diameter, so they integrate into system rows for adjustable shelving positions. The white color aligns with light-toned interiors, allowing the supports to visually recede against white or light laminate or melamine surfaces once shelves are installed. The shelf rest area of 7/16 in. wide by 13/32 in. long sets a compact footprint under the shelf edge, so these supports fit tight cabinet spaces where multiple holes run close to the front edge without projecting excessively into the opening.

Details That Support Consistent Shelf Alignment

The steel pin combined with a plastic support body provides a defined interface between the 5 mm bore in the panel and the underside of the shelf, so each position along a hole row locates the shelf at the same height. The 5/16 in. pin length fixes how deep the support sits in the side wall, giving repeatable vertical reference when matching left and right rows in cabinets or closets. With the shelf rest area set at 7/16 in. wide by 13/32 in. long, each support presents an equal bearing surface, so installers can rely on uniform contact at all four corners when setting adjustable shelves. The Pro Value Series identity and BA10438WH part number define a repeatable selection for ongoing work, so replacements or additional supports can match prior installations using this exact specification without changing hole size, visible color, or pin geometry.

Common Questions About BA10438WH Shelf Supports

Selecting This 5 mm Shelf Support For Your Project

The plastic shelf supports with steel pins 5 mm bore, identified as BA10438WH in the Pro Value Series, combine a 5/16 in. steel pin with a molded plastic rest sized 7/16 in. wide by 13/32 in. long. That combination suits drilled 5 mm bore panels where controlled pin depth and a compact bearing platform matter for adjustable shelves in cabinets, closets, or similar casework. For projects built around 5 mm shelf pin holes and light-colored interiors, this white support offers a defined way to hold shelf edges on a consistent platform along system hole rows. Use the BA10438WH specification when a matching 5 mm bore, steel pin construction, and white plastic rest are required across multiple cabinet or closet installations.