Hickory Hardware Free Swinging Inset Non-Mortise Finial Tip Hinge, Screw-on Antique Brass - P8293-AB

Hickory Hardware Hinge For Inset Cabinet Doors

Hickory Hardware free swinging inset non-mortise hinge gives an inset cabinet door a semi-concealed swing point without cutting a mortise, so doors can be mounted while leaving the frame largely intact. The non-mortise design keeps prep limited to screw locations, which helps on retrofit work where frames are already finished. This finial tip hinge provides a traditional hinge profile at the knuckle, which suits antique brass cabinet hardware layouts. The hinge is identified as a semi-concealed hinge, so part of the hardware sits on the face frame while the rest stays less visible in use. Belwith Keeler branding ties this hinge to a well-defined hardware line, simplifying part matching across a project. The hinge is listed within semi-concealed face-frame hinges and non-mortise hinges, so it is positioned for face-frame cabinet construction where inset doors are specified.

Key Hinge Details That Support Cabinet Work

• The center hole frame wing is provided for locking in after height is adjusted, so once the door reveals are set, the extra fastener position helps hold alignment through repeated use.
• This hinge is described as free swinging, so the leaf moves without built-in closing force, which suits applications where a separate catch or latch handles door retention.
• The hinge is noted as semi-concealed for face-frame use, so only a portion shows on the front, helping projects keep a cleaner look while still allowing straightforward screw-on mounting.
• The non-mortise classification means the hinge mounts on the surface of the frame and door, which avoids removing material from the cabinet parts and speeds layout on finished pieces.
• The hinge carries a finial tip detail, so the pin ends form a decorative feature at the knuckle that coordinates with traditional and antique brass cabinet styles.
• The antique brass designation defines the visible finish, which helps installers coordinate the hinge appearance with existing pulls, knobs, or other antique brass hardware.

Non-Mortise Screw-On Mounting And Pin Size

The hinge is described as screw-on, so fasteners are used through the leaves to secure it to the frame and inset door. That approach keeps installation to drilling and driving steps rather than cutting recesses into the wood. A center hole frame wing is specified for locking in after height is adjusted, so an installer can first set the door position, then add this fastener to stabilize the vertical setting. The fast pin size is listed as 2-1/2 L x 1-1/2 W, giving a reference for the hinge body length and width around the knuckle. Those dimensions help relate the hinge to door thickness and frame proportions during layout.

Where This Semi-Concealed Non-Mortise Hinge Fits

Using The Hinge On Face-Frame Inset Cabinets

This hinge is classified under hinges, semi-concealed face-frame hinges, and non-mortise hinges, positioning it directly for face-frame cabinet work with inset doors. The free swinging action fits layouts where the door simply needs a smooth pivot, while a separate catch handles retention. The center hole frame wing used for locking in after height adjustment supports fine-tuning inset reveals on site, then holding that setting during regular door operation. Antique brass finish on a finial tip hinge lets the exposed portion coordinate with traditional cabinet designs that call for visible knuckles and turned tips. Belwith Keeler branding aligns the hinge with a broad decorative hardware family, which is useful when a project calls for consistent antique brass parts across doors and drawers.

Details That Support Repeatable Door Alignment

The non-mortise design means the leaf sits on the surface of the frame and door, so the hinge position depends mainly on careful layout rather than chisel work, which helps keep multiple doors consistent on a run of cabinets. Screw-on mounting allows the installer to hang the door, check reveals, and then use the center hole frame wing for locking in after height is adjusted, so the vertical setting is held by an additional fastener. The classification as a semi-concealed hinge means part of the hardware remains out of sight when the door is closed, which reduces visual clutter around the frame while still giving access to standard screw heads for later adjustments. The fast pin size of 2-1/2 L x 1-1/2 W provides a known hinge length around the knuckle, helping align multiple hinges so doors track consistently and avoid binding along the edge.

Common Questions About The P8293-AB Hinge

Select The Antique Brass Hinge For Inset Work

The Hickory Hardware free swinging inset non-mortise finial tip hinge in antique brass, identified as P8293-AB, combines a surface-mount non-mortise layout with a semi-concealed face-frame classification. The center hole frame wing for locking in after height is adjusted supports precise inset reveals that stay put through daily use. With a fast pin size of 2-1/2 L x 1-1/2 W and a screw-on installation description, this hinge offers clear physical references for planning cabinet door layout. For projects drawing on antique brass Belwith Keeler hardware, this hinge aligns finish and style with the rest of the hardware set.