CompX National Disc Tumbler Rear Mount Cam Lock, 7/8" Cylinder with 3/4" Mounting Hole, Bright Nickel C8080-C346A-14A
Description
CompX National Disc Tumbler Rear Mount Cam Lock Use
CompX National disc tumbler rear mount cam lock secures cabinet doors and drawers by rotating a cam from the rear, giving installers a compact locking point that works inside typical woodworking layouts. The 7/8 inch cylinder dimension sets the lock body length, helping you match it to door or drawer front thickness in your build. A 3/4 inch mounting hole requirement defines the bore size, so casework drilling can be planned accurately during fabrication. The bright nickel finish establishes a clean appearance around the cylinder face, which matters when the lock is visible on finished fronts. This cam lock design is described for doors and drawers, so it fits common storage applications in cabinetry or casework projects. The disc tumbler mechanism defines the lock style, aligning with common keying systems used across many shop and site installations.
Cam Lock Details That Support Cabinet Workflows
- Each lock description states use for doors and drawers, so one part number can be applied across multiple cabinet openings, simplifying hardware planning when laying out casework.
- Two stop washers allow the cam to turn either 90 or 180 degrees, so you can match the throw to how far the cam must rotate to clear or engage strikes or frame edges.
- Stop washers are specified for either 90 or 180 degree cam turn, which clarifies rotation limits and helps you design door or drawer engagement points to suit the chosen swing.
- Key removal in both locked and unlocked positions means the cylinder can be used as a simple turn-and-remove control, which is useful when users need to leave the lock open without a key trapped.
- Two formed cams are described as 1-1/2 inch extension with 3/32 inch inset or 1/4 inch offset, giving different reach and offset options so the cam can align with varying frame or strike positions.
Rear Mount Cam Lock Fit And Installation Focus
The rear mount cam lock layout positions the locking cam behind the door or drawer panel, which keeps the moving parts inside the cabinet envelope and away from the exterior face. The 3/4 inch mounting hole specification sets the drilling size, giving a clear dimension for boring operations before finishing. With a 7/8 inch cylinder, the lock body length pairs with the specified hole to support a consistent fit in many panel thicknesses. Bright nickel on the visible components maintains a uniform metal tone with other bright nickel hardware, helping installations keep a consistent look. The cam choices of 1-1/2 inch extension with either 3/32 inch inset or 1/4 inch offset define how far and at what step the cam engages, which lets you position strikes, rails, or edges to catch the cam reliably.
Using This C8080-C346A-14A Cam Lock In Projects
Where This Disc Tumbler Cam Lock Is Applied
This CompX National disc tumbler rear mount cam lock is identified specifically for doors and drawers, so it is suited to cabinet, casework, and storage fronts where a rotating cam can grab a frame or strike. The rear mount style means the cam acts behind the panel, which keeps the front face clean except for the bright nickel cylinder trim. The 7/8 inch cylinder length and 3/4 inch mounting hole dimension guide where it fits best, such as fronts that can accept that bore size without weakening narrow rails or stiles. With two formed cams described as 1-1/2 inch extension in either 3/32 inch inset or 1/4 inch offset, the lock can reach behind varying reveals or overlaps on doors and drawers, helping it align with frames or intermediate rails in different cabinet layouts.
Why These Cam Lock Details Improve Results
The option to set the cam for either 90 or 180 degree turn using the provided stop washers lets you choose between a short throw or full half-turn action, which matters when tight clearances or specific strike positions demand precise rotation. Having stop washers defined for both 90 and 180 degree cam turns creates predictable end positions, making it easier to repeat installations across multiple openings with the same hardware behavior. Key removal in both locked and unlocked positions changes how users interact with the lock, since they can remove the key after locking for security or after unlocking when they want free access without a key left hanging. Two formed cam options at 1-1/2 inch extension, one with 3/32 inch inset and one with 1/4 inch offset, give distinct reach and step, so the cam can land squarely on a frame, mullion, or keeper rather than only catching on an edge. The manufacturer part number C8080-C346A-14A identifies this exact bright nickel cam lock configuration, which keeps ordering and reordering consistent when matching existing installations.
Common Questions About This Bright Nickel Cam Lock
What type of cam lock is the C8080-C346A-14A?
The C8080-C346A-14A is a CompX National disc tumbler rear mount cam lock, so it uses a disc tumbler mechanism and mounts from the rear for cabinet and drawer applications.
Where is this cam lock intended to be used?
This cam lock is described for doors and drawers, so it suits cabinet and casework fronts where a rotating cam can engage a frame, rail, or strike surface.
What mounting hole size does this cam lock require?
This CompX National cam lock is specified for a 3/4 inch mounting hole, which defines the bore diameter needed in the door or drawer front.
How long is the cylinder on this cam lock?
The cylinder length is listed as 7/8 inch, which sets how the body seats through the panel and helps match the lock to typical front thicknesses.
How far can the cam turn on this lock?
This lock uses stop washers that allow the cam to turn either 90 or 180 degrees, letting you match the rotation to your frame or strike layout.
When can the key be removed from this cam lock?
The lock is described as key removable in both locked and unlocked positions, so the key can be taken out after securing or opening the cabinet.
Select This Cam Lock For Precise Door And Drawer Fit
This CompX National disc tumbler rear mount cam lock with 7/8 inch cylinder and 3/4 inch mounting hole pairs cleanly with many cabinet doors and drawers, giving a predictable fit. The bright nickel finish, dual cam options, and selectable 90 or 180 degree rotation support consistent layouts across multiple openings. Choosing the C8080-C346A-14A part number keeps projects aligned to a known configuration when matching existing casework or planning repeatable shop installations.
