CompX National Disc Tumbler Rear Mount Cam Lock, 7/8" Cylinder with 3/4" Mounting Hole, Bright Nickel C8080-C413A-14A
Description
CompX Cam Lock For Doors And Drawers
CompX National disc tumbler cam lock is a rear mount cam lock designed for doors and drawers, so it secures typical cabinet and casework fronts in a compact footprint. The 7/8 inch cylinder length works where moderate material thickness and hardware clearance are common, giving installers a familiar dimension for layout and boring. A 3/4 inch mounting hole size sets the required bore diameter, helping drilling setups stay consistent across multiple doors or drawers. The bright nickel finish defines the visual appearance, matching other bright nickel hardware on the same job for a unified look. This lock is described as a disc tumbler cam lock, which identifies the internal locking mechanism style that many shops already know how to key and service. As part of the CompX National cam locks line, it fits into standard lock selection routines when specifying hardware for cabinets.
Cam Lock Details That Support Real Jobs
- Being a rear mount cam lock positions the locking body behind the panel, which keeps the exterior face clean while still delivering positive engagement at the cam.
- A 7/8 inch cylinder length provides a defined reach through typical door or drawer fronts, which simplifies choosing this lock when panel thicknesses are within that range.
- The 3/4 inch mounting hole requirement sets a clear drilling dimension, which supports jig-based boring and reduces layout variation across multiple installations.
- The bright nickel description identifies the finish, which helps match this cam lock to bright nickel hinges, pulls, or other visible hardware on the same project.
- Placement in the cam locks category clarifies that this part functions as a rotating cam-style lock, which suits standard cabinet door and drawer security layouts.
Rear Mount Cam Lock Fit And Setup
This CompX National disc tumbler rear mount cam lock uses a 3/4 inch mounting hole, so boring operations can be planned around that single dimension. The 7/8 inch cylinder length defines how far the lock body projects through the panel, which influences where the cam will swing relative to the cabinet frame or strike. Because it is specified for doors and drawers, installers can apply the same hardware family across different front types on the same run, maintaining consistent keying and operation. The bright nickel finish identifies how the face of the lock will present on the exterior, which matters when aligning it with other visible bright nickel components on the job.
Using This C8080-C413A-14A Cam Lock In Work
Where This Disc Tumbler Cam Lock Is Applied
This CompX National disc tumbler rear mount cam lock is described for doors and drawers, so it fits typical cabinet, furniture, or fixture fronts where a rotating cam secures into a frame or strike. The 7/8 inch cylinder length supports use on fronts where that dimension places the cam in a usable arc behind the panel. A 3/4 inch mounting hole specification ties directly to the panel preparation, so repetitive drilling on doors and drawers follows the same bore size. The bright nickel finish helps this lock blend into bright nickel hardware suites, which is useful when visible lock faces need to coordinate with pulls or hinges. The cam lock classification confirms that this product is meant to rotate a cam behind the panel, tying into standard cabinet locking layouts.
Details That Support Consistent Cam Lock Results
This cam lock is identified as a disc tumbler design, which establishes the internal locking mechanism type that shops may standardize on across projects. Being a rear mount configuration defines how the lock body sits relative to the panel, giving a predictable relationship between the exterior key face and the interior cam position. The 7/8 inch cylinder length provides a fixed depth reference that helps position the cam consistently on different doors or drawers built to similar thickness. The 3/4 inch mounting hole requirement aligns the product with common boring practices, supporting the use of production jigs. The bright nickel description gives a clear finish target, which aids in specifying this lock alongside other bright nickel components in a hardware schedule.
Common Questions About This Cam Lock Setup
What type of lock is the C8080-C413A-14A part?
The C8080-C413A-14A part is a CompX National disc tumbler rear mount cam lock, so it uses a rotating cam and disc tumbler mechanism to secure doors or drawers.
Where is this rear mount cam lock typically used?
This rear mount cam lock is specified for doors and drawers, so it fits common cabinet and furniture fronts that require a rotating cam to secure into a frame or strike.
What mounting hole size does this cam lock require?
This cam lock requires a 3/4 inch mounting hole, which sets the bore size for drilling jigs and helps maintain consistent preparation on multiple doors or drawers.
How long is the cylinder on this CompX cam lock?
The cylinder on this CompX National cam lock is 7/8 inch long, which defines how far the lock body extends through the panel and where the cam will operate behind it.
What finish does this CompX National cam lock have?
This CompX National cam lock is described as bright nickel, so its visible face coordinates with bright nickel hinges, pulls, and related hardware on the same project.
Is this cam lock suitable for both doors and drawers?
This cam lock is specified for doors and drawers, so a single lock style can be used across different cabinet front types within the same installation.
Choose This Cam Lock For Doors And Drawers
This CompX National disc tumbler rear mount cam lock, part C8080-C413A-14A, provides a 7/8 inch cylinder and 3/4 inch mounting hole that align with common cabinet construction. The bright nickel finish lets this cam lock visually match other bright nickel hardware while securing doors and drawers with a familiar cam-style action.
