panel retaining clips glass and panel 3/16 inset describes Hughes Supply Panel Retaining Clips Glass and Panel 3/16" Inset, Clear - 1000 Each, a plastic panel assembly fitting that holds solid panels in place by maintaining a soft pressure against the panel or glass, so the panel stays seated and secure in its frame. The 3/16" inset detail describes the intended panel offset, helping align your layout when you are planning rails, stiles, and groove depth. Clear plastic construction keeps the retainer visually low-profile against glass or light materials, which suits projects where visible hardware would distract from the panel. As a panel assembly fitting classified under fasteners, this part integrates into standard woodworking workflows where a small retainer is preferred over larger mechanical clamps.
The web description specifies that this panel retaining clip uses a #5 flat head or oval head screw, so the mounting interface is defined and can be matched to typical small fastener drilling patterns in frame members. Using a #5 screw size keeps the fastening point compact, which suits narrow door frames or slim mullions where larger screws would reduce available material. The reference to flat head or oval head screw options gives flexibility in how the head seats in the clip relative to the frame surface, which matters when aligning multiple retainers along a stile for even contact. Because the product is part of panel assembly fittings, it fits into layouts where clips are spaced around the panel perimeter to provide distributed holding pressure.
The product is categorized as Panel Retaining Clips under Fasteners and identified as Panel Assembly Fittings, so it is intended for jobs where a solid panel or glass lite is captured within a frame and needs steady pressure instead of a rigid clamp. The web description states that it holds solid panels in place, so it fits cabinet doors, display cases, or framed panels where the insert must remain centered in a groove or rabbet during normal use. Because it maintains a soft pressure against the panel or glass, it suits applications where a little compliance is beneficial, such as wood doors that may move slightly with seasonal changes while still needing controlled contact. Clear plastic material and the 3/16" inset detail allow these fittings to sit at the edge of glass or panels without drawing attention, which is useful in retail fixtures or residential doors where hardware visibility is a concern.
The product name callout of 3/16" inset gives a defined design target when laying out frame profiles, so fabricators can cut grooves and rabbets with confidence that the clip is suited to that offset, reducing layout adjustments during assembly. Because the clip maintains a soft pressure against the panel or glass, as stated in the web description, it helps prevent rattling that would otherwise send finished doors back for adjustment, which saves site visits and shop time. The use of a #5 flat head or oval head screw provides a small and consistent fastening standard, so drilling and driving operations can be repeated across multiple doors or frames without changing tooling. As a clear plastic retainer, it contacts the panel or glass without introducing metal-to-glass points, reducing the likelihood of edge chipping on glass or finish damage at the panel perimeter during normal operation. With these characteristics tied directly to the specified design and materials, the clip supports repeatable, production-friendly panel installs across similar 3/16" inset projects.
The Hughes Supply panel retaining clips are described as holding solid panels in place and maintaining soft pressure against panel or glass, so they suit framed solid panels or glass lites needing controlled contact.
The 3/16" inset in the product name indicates the intended panel offset, guiding groove or rabbet placement so the retainer contacts the panel edge where designed.
The panel retaining clip is specified for use with a #5 flat head or oval head screw, so drilling and driving can follow that single screw size standard in the frame.
The product is described as maintaining a soft pressure against the panel or glass, so it cushions slight movement and reduces rattling in doors or frames during regular use.
Classified as Panel Assembly Fittings and Panel Retaining Clips, this part provides localized holding pressure at the panel edge, supporting stable panel positioning within a framed assembly.
The Hughes Supply Panel Retaining Clips Glass and Panel 3/16" Inset, Clear - 1000 Each pairs a defined 3/16" inset with clear plastic construction and #5 screw mounting, so it supports consistent panel or glass retention across repeatable builds. By holding solid panels in place and maintaining a soft pressure against the panel or glass, the clip contributes to quiet, stable doors and frames in service. For production or trade projects needing panel assembly fittings that control movement without drawing attention, this panel retaining clip configuration from Wurth Baer Supply provides a clearly specified fastening point.
Sold In: 1000 Each
