Panel retaining clips 1/8 inset walnut from Hughes Supply are plastic panel assembly fittings designed to hold solid panels in place and prevent rattling. Each clip maintains a soft pressure against the panel or glass, so the insert stays seated yet can still be serviced when needed. The 1/8 inch inset design suits thin panels or glass where you want the face of the panel to sit slightly back from the frame. Dark brown walnut color helps the fastener blend in when used with similar finishes, which keeps the focus on the work, not the hardware. As part of the panel assembly fittings category, these clips support clean, repeatable builds in cabinet, fixture, or other panel-based projects where a solid, rattle-free fit matters.
These panel retaining clips use either a #5 flat head or oval head screw, so the installer selects the head style that best matches the frame material and desired profile. The clip is made of plastic, which is easy to position and snug down without marking most frame materials. Their 1/8 inch inset design suits panel or glass layouts where the insert needs a controlled setback from the front edge. Soft pressure against the panel or glass keeps the insert quiet in service, so doors or frames close without the distraction of a loose panel sound.
These panel retaining clips are panel assembly fittings for 1/8 glass or solid panels where you need a simple way to hold the insert in place. The design holds solid panels in place while maintaining a soft pressure, so decorative panels, glass lites, or back panels stay aligned in their frame. The 1/8 inch inset layout suits thin material commonly used for cabinet doors, display panels, or shallow panel recesses. Because the clips apply soft pressure rather than rigid clamping, they let the panel expand, contract, or be removed for service while still staying supported during normal use. Dark brown walnut color works well in darker cabinet interiors or wood tones, helping the hardware stay unobtrusive when doors are open. In fastener-heavy builds, this small color match keeps the interior from looking visually busy while still delivering the panel retention needed for daily operation.
The combination of plastic construction and soft pressure against the panel or glass helps provide consistent contact without biting into the material, which matters when repeating the same assembly across many openings. Using a #5 flat head or oval head screw gives a familiar fastener interface, so the installer can standardize on a small screw size for this style of retainer. The clip design that holds solid panels in place reduces panel rattle, which improves perceived quality of doors or frames every time they are opened and closed. With 1/8 inch inset geometry, the panel position is predictable from opening to opening, which simplifies layout of grooves, rabbets, or stops. As a plastic panel retaining solution from Hughes Supply, PGH261WAL ties panel fit, noise reduction, and appearance together in one small component, supporting clean, repeatable panel assembly on production or retrofit work.
PGH261WAL panel retaining clips are made of plastic, which helps protect panel or glass edges while keeping each retainer lightweight in cabinet or fixture assemblies.
The panel retaining clips hold solid panels in place and maintain a soft pressure against the panel or glass, which keeps the insert seated and helps prevent rattling in service.
These panel retaining clips use a #5 flat head or oval head screw, giving the installer two familiar head profiles to match frame material and desired appearance.
The 1/8 inch inset design indicates the clips are intended for layouts where the panel or glass sits slightly back from the front frame edge, helping control panel position.
The dark brown walnut color lets the retainer blend with similar finishes, so inside darker cabinets or displays the clip is less noticeable when the door or panel is open.
As panel assembly fittings, these clips secure panels or glass while limiting rattle, which supports cleaner, quieter cabinet and fixture builds.
The Hughes Supply panel retaining clips 1/8 inset walnut, part number PGH261WAL, hold solid panels in place and maintain a soft pressure against panel or glass. Using a #5 flat head or oval head screw, they give a compact fastening point in wood or similar substrates. Plastic construction and dark brown walnut color combine to support quiet, visually clean cabinet or fixture interiors. For projects where a controlled 1/8 inch inset and reduced panel rattle matter, these panel assembly fittings align well with professional shop and serious DIY requirements.
Sold In: 100 Each
