Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Panel retaining clips glass and panel 5/16 inset tan from Hughes Supply are plastic panel assembly fittings designed to hold solid panels in place. Each tan retainer button applies a soft pressure against a panel or glass, which helps control movement within the frame. That soft pressure reduces rattling, so finished doors, frames, or inserts feel tighter in service. As panel retaining clips, they support glass or solid panels where a discreet hold is needed. The 5/16 inch inset design sets the working position of the button, which helps align the contact point to the panel edge in a consistent way across multiple openings. Classified by Wurth Baer Supply as fasteners and panel retaining clips within panel assembly fittings, these parts integrate easily into established woodworking hardware workflows.
These Hughes Supply panel retaining clips are designed around a #5 flat head or oval head screw, which gives a clear starting point for the fastening pattern. Using a #5 flat head screw allows the head to sit countersunk into the plastic button, so the working face of the retainer can contact the panel more evenly. Using a #5 oval head screw changes the bearing profile at the clip, which can slightly alter how the pressure seats onto the wood or glass surface during tightening. Because the product maintains a soft pressure against the panel or glass, installers can bring the retainer button into light contact and establish a stable hold that reduces rattling without hard clamping. The 5/16 inch inset characteristic guides where the contact point lands relative to the frame edge, which helps keep the panel support line consistent from clip to clip.
This product is identified as panel retaining clips under panel assembly fittings, so it serves in assemblies where a panel or glass insert needs to be held against a frame. In a typical door or frame construction, the retainer button presses lightly against the back of the panel or glass, helping to keep it seated while the frame carries the structural load. Because the button is made of plastic, it can press against glass or finished panels with a softer interface than metal, which supports use in decorative or finished interiors. The 5/16 inch inset referenced in the product name describes how the clip geometry relates to the panel position, which helps the installer place the contact point so that panels stay centered within their recess.
The way this retainer holds solid panels in place and prevents rattling by maintaining a soft pressure against the panel or glass directly affects field results. That soft pressure enables a firm but forgiving contact, so panels stay quieter in use while avoiding harsh point loads on the material. The use of #5 flat head or oval head screws standardizes the connection, letting the same screw size be applied across multiple openings for repeatable fastening. When a #5 flat head screw is used, its geometry helps the screw nest into the button, so the installer can feel a more centered clamping action at the retainer. With a #5 oval head screw, the head form changes the way force spreads through the plastic, which provides another option when tailoring the contact. The tan color described in the name offers a neutral appearance, which helps the buttons blend more easily around many panel and frame finishes during installation.
This Hughes Supply panel retaining clip holds solid panels in place and prevents rattling by maintaining a soft pressure against the panel or glass, which helps keep inserts stable in everyday use.
The 5/16 inch inset defines how far the working face of the retainer sits from its mounting point, helping position the contact area consistently relative to the panel within the frame.
The panel retaining clip is made of plastic, so it maintains a soft pressure against panel or glass surfaces, which supports quieter operation and a gentler bearing surface on finished materials.
The web description states it uses a #5 flat head or oval head screw, so the retainer is designed to be fastened with standard #5 screws in those head styles.
The retainer maintains a soft pressure against the panel or glass, so it takes up small clearances around the insert and reduces the movement that causes rattling noises.
At Wurth Baer Supply, H-0264-8268/M is listed under fasteners and panel retaining clips in panel assembly fittings, so it serves as a panel-retention fastener.
This Hughes Supply tan panel retaining button is specified to hold solid panels in place and prevent rattling by applying soft pressure against panels or glass. Its plastic construction gives a cushioned interface at the contact point, which supports use around finished or glass inserts. The 5/16 inch inset characteristic guides how the contact surface meets the panel, while the #5 flat head or oval head screw requirement defines the fastening approach. For projects organized around panel assembly fittings and fasteners, this part number H-0264-8268/M offers a defined role as a panel retaining clip within the hardware layout.
Sold In: 1000 Each
