Invisible 16mm Barrel 180˚ Opening Hinge, Solid Brass

Invisible 16mm Barrel Hinge For Concealed Joints

Invisible 16mm barrel hinge is a fully concealed solid brass hinge that disappears into the workpiece, so doors or panels close with no visible hardware and a clean, uninterrupted surface on finished projects. The hinge uses heavy duty brass linkage inside the barrel, which carries the pivot load within the drilled holes and supports repeated opening and closing where a compact concealed pivot is required. A 180 degree opening range lets the connected parts swing fully open, which provides clear access to the cabinet or compartment without binding at the hinge edge. The 16 mm diameter format ties the hinge size directly to the drilling requirement, which helps installers match the right bit and layout to a consistent, repeatable hole size in production or retrofit work.

Solid Brass Invisible Hinge Details That Matter

• Fully concealed design allows the hinge to sit completely within the drilled holes, so the joint presents a smooth, hardware-free appearance on both faces when the door or panel is closed.
• Solid brass construction means the hinge body and components are brass, which provides a non-ferrous option for woodworking projects where brass hardware is preferred for material compatibility or aesthetic reasons.
• Heavy duty brass linkage inside the hinge carries the pivot motion through interlocking brass elements, so the opening and closing movement stays aligned inside the barrel over long-term use.
• 180 degree opening capability allows the connected part to open flat relative to the mounting surface, which gives full access to the interior space and helps avoid interference at the edge of the door.
• BH164 manufacturer part number identifies this specific 16 mm cylinder hinge within the Soss invisible hinge line, which helps match specifications when repeating, reordering, or pairing with project documentation.

16mm Concealed Hinge Installation Workflow

The hinge is designed to install by drilling holes to the exact 16 mm diameter, so the barrel fits precisely into the workpiece and maintains alignment between mating parts. During installation the hinge is tapped into the hole until the barrel sits flush with the material surface, which positions the pivot correctly and keeps the face level for a clean finished look. A hinge set screw is then tightened to expand an internal wedge, and this expansion locks the barrel against the sides of the drilled hole so the hinge stays permanently fastened in the wood. Because the drilling size, tapping step, and wedge expansion are defined, installers can repeat the same sequence across multiple hinges for consistent results along a door edge or series of panels.

Using The BH164 Invisible Hinge In Projects

Where This 16mm Cylinder Hinge Is Applied

This cylinder hinge is classified as an invisible hinge, so it serves in applications where the pivot must be hidden from view on both the face and edge of the workpiece. The 16 mm diameter places it within a family of five sizes that range from 10 mm to 18 mm, and this sizing sequence lets builders select the BH164 when a mid-range barrel size suits the door thickness or panel dimensions. As part of the Soss invisible hinge offering in the Hinges | Invisible and Recessed Hinges category, the BH164 suits woodworking projects that benefit from a recessed hinge set fully into the material rather than surface-mounted hardware. The fully concealed configuration means that when the door or panel is closed, the hinge resides completely in the drilled bores, supporting flush construction details on cabinets, furniture pieces, or custom enclosures.

Why BH164 Construction Supports Repeatable Results

The combination of solid brass construction and heavy duty brass linkage gives the BH164 a uniform material makeup from body to moving elements, which supports consistent performance when multiple hinges share the load on a single door or lid. The defined installation sequence - drilling to exact 16 mm diameter, tapping the hinge until it is flush, and tightening the set screw to expand the wedge - creates a predictable workflow that can be repeated across production runs. Once the wedge expansion locks the barrel in place, the hinge becomes a permanent fastening point, which helps maintain alignment of the pivot centerline over time. The 180 degree opening capability also supports layouts where full opening is required, so installers can plan clearances and stops around a known motion range. Because the BH164 is identified by a specific manufacturer part number, installers and buyers can specify the same hinge again when matching existing work, which supports uniform appearance and motion characteristics across new and existing installations.

Common Questions About The BH164 Barrel Hinge

Select The BH164 Hinge For Concealed Brass Joints

The BH164 invisible 16 mm barrel hinge from Soss combines a fully concealed design, solid brass construction, and heavy duty brass linkage to support clean, flush woodworking joints. With the defined drill, tap, and wedge-expansion installation method, this cylinder hinge fits workflows that value repeatable setups across doors, panels, or lids. When a 180 degree opening range and invisible hardware line up with your layout, this 16 mm cylinder hinge provides the concealed pivot function while remaining buried in the material. Specify the BH164 part when you need a solid brass invisible hinge sized for 16 mm bores on your next cabinet or furniture build.