
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Invisible 14mm barrel hinge gives you a fully concealed pivot point, so doors or panels close cleanly without exposed hardware breaking up the surface. Solid brass construction provides a dense, stable body that stands up to frequent motion in typical woodworking use. Heavy duty brass linkage inside the hinge creates a controlled pivot, which helps panels track consistently over the full 180 degree opening range. As an invisible hinge in the Soss line, this BH144 cylinder hinge sits recessed in the edge of the workpiece, supporting clean architectural lines on cabinets, panels, or furniture pieces. The 14 mm diameter size defines the drilling and layout, which helps you build repeatable jigs and consistent spacing across multiple installations. Using an invisible hinge in this format lets you keep the focus on the woodwork while the moving parts stay buried in the core.
The web description specifies that installation starts by drilling holes to the exact diameter of the hinge, so a 14 mm boring tool sets the basic pocket size. Tapping the hinge into the hole until it is flush seats the barrel body, which brings the outer surface level with the workpiece and prepares the piece for a clean edge reveal. Tightening the hinge set screw then expands an internal wedge, which locks the brass cylinder against the sides of the hole. This wedge-based fastening creates a friction fit around the full circumference, so the hinge resists loosening under normal opening and closing cycles. Using only the stated drill, tap, and tighten steps keeps the workflow straightforward on both new builds and retrofit work using this BH144 cylinder hinge.
This product is described as a fully concealed hinge made of solid brass with heavy duty brass linkage, which positions it well for cabinet, panel, and furniture projects where visible hinges would distract from the wood surface. As part of the Invisible Hinges product class under Invisible and Recessed Hinges, the 14 mm cylinder hinge aligns with recessed mounting in the edge or face of a workpiece. The 180 degree opening hinge behavior supports applications where the panel needs to clear the opening completely, such as access doors in built-ins or flush-fitting cabinet fronts. Because it belongs to the Soss invisible hinge family, the BH144 fits design approaches that rely on hidden hardware and crisp reveals rather than traditional surface-mounted leaves.
The instruction to drill holes to the exact diameter of the hinge highlights the importance of a true 14 mm bore, which directly affects how well the solid brass barrel nests in the material and how accurately the pivot centers along the edge. Tapping the hinge into the hole until the barrel is flush uses the workpiece face as a natural reference, helping maintain a consistent reveal line from one hinge to the next. When the hinge set screw is tightened, the expanding wedge inside the cylinder presses outward, so the hinge grips the surrounding wood along the full length of the bore and resists rotation or creep during use. These defined steps - drill to 14 mm, tap to flush, and tighten to expand the wedge - give installers a repeatable sequence that supports consistent alignment across multiple doors or panels. In practice, using the same BH144 process on each unit can reduce layout variation and help doors swing similarly across a run of cabinets or built-ins.
The BH144 is described as a fully concealed 14 mm cylinder hinge in the Invisible Hinges class, so it functions as a recessed, invisible pivot inside the workpiece rather than a surface-mounted hinge.
The 14 mm cylinder hinge is installed by drilling holes to the exact diameter, tapping the hinge into the hole until it is flush, and then tightening the hinge set screw to expand the wedge for permanent fastening.
The hinge and its heavy duty brass linkage use solid brass, giving a uniform metal structure that supports smooth movement and stable engagement in typical cabinet and woodworking environments.
The 14 mm diameter defines the drilling size, so matching the bore to this dimension allows the barrel body to seat properly and lets the expanding wedge lock the hinge firmly in the hole.
The BH144 hinge uses a set screw that expands an internal wedge, pressing the brass cylinder against the hole walls so the hinge remains permanently fastened under standard opening and closing cycles.
This hinge is described as a 180 degree opening hinge, so it allows the attached panel or door to swing through a full half-circle for wide access at the opening.
The Invisible 14mm barrel hinge from Soss delivers a fully concealed pivot with 180 degree opening, which suits projects that prioritize uninterrupted surfaces and wide access. Using the defined drill-to-14-mm, tap-to-flush, tighten-to-expand sequence, installers apply a clear method that anchors the solid brass body firmly in the workpiece. For woodworking applications that call for invisible hinges in the BH144 size, this cylinder hinge gives a specific, repeatable approach to hiding movement while keeping the motion accessible.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SO18 Mfr# BH184 | Invisible 18mm Barrel 180˚ Opening Hinge, Solid Brass | ||||
Sold in: 1 Each | SO16 Mfr# BH164 | Invisible 16mm Barrel 180˚ Opening Hinge, Solid Brass | ||||
Sold in: 1 Each | SO12 Mfr# BH124 | Invisible Barrel 180˚ Opening Hinge, Solid Brass |