Invisible Barrel 180˚ Opening Hinge, Solid Brass

Invisible Barrel 180 Opening Hinge For Clean Lines

Invisible Barrel 180 Opening Hinge from Soss is a fully concealed hinge that sits inside a 12 mm drilled cylinder, so doors or panels pivot a full 180 degrees while keeping the hardware hidden from view. The solid brass construction provides a robust hinge body, which matters when a project calls for a compact hinge that still feels substantial in everyday use. Heavy duty brass linkage connects the hinge barrels internally, so the pivot action is carried by brass-on-brass contact instead of light sheet parts, useful where the hinge will cycle repeatedly over time. As an invisible hinge in the Invisible and Recessed Hinges category, it lets you design with clean surfaces, because the hinge operates inside the door and frame rather than on the edges. The BH124 designation identifies this specific 12 mm cylinder model, helping installers match it to drilled hole size and project details.

Key Soss Cylinder Hinge Details That Matter

• The fully concealed design keeps the hinge hidden inside the workpiece, which allows doors, lids, or panels to close without visible hardware breaking up the finished surface.
• Solid brass hinge bodies give a dense, metal-to-metal bearing surface, so the hinge feels substantial in use and suits woodworking projects where brass hardware is a design choice.
• Heavy duty brass linkage ties the barrels together internally, which supports the 180 degree opening motion in a compact form factor useful on smaller doors or panels.
• A 12 mm cylinder size defines the drilling requirement, so installers can match the hinge to the right bit and produce repeatable, accurate bores in production runs.
• Availability in five sizes from 10 mm to 18 mm diameter lets shops standardize on a hinge family, scaling hole size to match different door thicknesses or project needs.

Drill-In Installation And Flush Hinge Positioning

This Soss cylinder hinge is designed around a drilled installation, where holes are bored to the exact 12 mm diameter of the hinge body so the barrels fit snugly in the wood. Once the holes are drilled, the hinge is tapped into place until the outer edge of the hinge sits flush with the surface, giving a seamless look when the door or panel is closed. A hinge set screw then tightens to expand an internal wedge, which locks the hinge body inside the bore for permanent fastening without external clips or plates. Because the hinge is part of a five-size family from 10 mm to 18 mm, a shop can treat drilling as a predictable, repeatable step, simply changing the bit diameter to match the specified hinge size on a given job.

Using This Soss Invisible Hinge In Real Projects

Where This 12mm Cylinder Hinge Fits Best

As an Invisible Barrel 180 Opening Hinge in the Invisible Hinges class, this BH124 hinge suits applications where the hardware must disappear into the construction. The 12 mm cylinder size makes it appropriate for jobs where there is enough material to drill that diameter while keeping good edge distance, such as cabinet doors, small passage panels, or furniture lids. Because the hinge is fully concealed in drilled holes, it helps maintain continuous grain or paint lines across doors and frames, which is valuable on higher-end woodworking where visible hinges would compete with the design. The 180 degree opening capability allows doors or panels to swing fully open, which can improve access to cabinet interiors or compartments when wide clearance is important.

Details That Support Accuracy And Repeatable Results

The requirement to drill holes to the exact diameter of the hinge means that using a true 12 mm bit directly controls fit, so each BH124 hinge seats consistently from piece to piece. Tapping the hinge into the bore until the hinge is flush eliminates guesswork on projection, because the surrounding surface becomes the stop reference for depth. The internal wedge, expanded by tightening the hinge set screw, converts the smooth cylinder into a locked-in anchor, which holds the hinge body without relying on surface plates. Solid brass construction throughout the hinge body and linkage provides a uniform material to cut against if any fine tuning of the mortised edge is needed, while still keeping the mechanism enclosed. With five available diameters from 10 mm to 18 mm in the same family, shops can build jigs once and scale them for other sizes by swapping drill bushings or bits, using the same installation logic for each hinge size.

Common Questions About The BH124 Cylinder Hinge

Selecting This Hinge For Concealed Brass Projects

The Invisible Barrel 180 Opening Hinge, Solid Brass from Soss combines a 12 mm cylinder body, fully concealed operation, and heavy duty brass linkage, giving installers a consistent drilling-based method for hidden pivots. For projects designed around brass hardware and uninterrupted surfaces, this BH124 model aligns hinge size, material, and 180 degree performance in a single cylinder format. When a job calls for an invisible hinge from a defined size range between 10 mm and 18 mm, this 12 mm option offers a clear, drill-to-size path from layout through final fastening.