
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
2 inch desk grommet cap is a solid brass, hand machined cap designed for a 1-3/4 inch hole, so it gives a precise fit on work surfaces drilled to that size. The cap sits 1/16 inch above the desktop, creating a defined trim edge that finishes the opening while staying low enough for typical desktop use. A permanent cut out for wires in the cap keeps cords routed through a fixed opening, which helps maintain cable organization over time. The polished brass finish matches the bright brass description, giving a consistent metal look where the cap is visible on desks, shelves, or workstations. As a grommet cap within the grommets product class, it works with a matching liner to complete the wire pass-through point on multimedia and workspace components.
This Doug Mockett and Company, Inc. cap is built for a 1-3/4 inch hole, so the work surface opening is set before the cap and liner assembly are used. The cap sitting 1/16 inch above the desktop means the liner supports the cap from below while the cap forms the visible trim ring on top. Because the cap and liner are sold separately, the cap focuses on finishing the upper surface while the liner manages the interior of the hole. The permanent wire cut out in the cap keeps the opening consistent every time cords are added or removed, which supports repeatable routing during workspace adjustments or reconfigurations.
This grommet cap sits in the Shelf, Closet and Garage Organization as well as Multimedia and Workspace Components categories, so it suits desks, counters, and similar worktops where wires need to pass through a finished opening. The 2 inch desk grommet cap identity reflects the visible diameter at the surface while the 1-3/4 inch hole specification defines the cut size, so it works where the drilled opening is slightly smaller than the finished trim ring. The polished brass, bright brass look aligns with brass hardware in built-ins or office casework, letting the wire pass-through read like another piece of decorative hardware rather than a rough cut hole.
The solid brass, hand machined build of this MM3-3 desk grommet allows the cap to seat accurately in the liner, so the 1/16 inch height above the desktop stays uniform around the perimeter. That consistent height provides a reliable visual edge and helps the cap sit flush relative to the liner below, reducing irregular gaps around the hole. The permanent cut out for wires in the cap fixes the opening size, which reduces variation in how cables exit the work surface from one install to the next. As a separate cap working with a separate liner, each component focuses on its role: the liner handles the wall of the 1-3/4 inch hole, while the solid brass cap finishes the top and controls the cable exit point. Within the grommets product class, this structure supports repeatable routing on multiple workstations using the same drilled-hole layout.
The 2 inch desk grommet cap is designed for a 1-3/4 inch hole, so drilling that opening sets the correct fit for the cap and matching liner.
The polished brass grommet cap sits 1/16 inch above the desktop, creating a small trim reveal while staying low for normal workspace use.
The MM3-3 desk grommet cap is solid brass and hand machined with a polished bright brass appearance, giving a metal finish that matches brass hardware.
The cap has a permanent cut out for wires, so cables always pass through a fixed opening that keeps the routing consistent on the desktop.
The grommet liner and grommet cap are sold separately, with the liner fitting the 1-3/4 inch hole and the cap finishing the top surface and wire exit.
This bright brass desk grommet cap is part of the grommets product class within multimedia and workspace components, suited for organized wire pass-through points.
The 2 inch desk grommet cap pairs a 1-3/4 inch hole requirement with a polished bright brass, solid brass design, giving a defined wire exit point on desktops and worktops. The cap sitting 1/16 inch above the surface frames the opening, while the permanent cut out for wires keeps cable routing consistent across installs. For projects using Doug Mockett and Company, Inc. grommets from Wurth Baer Supply, this MM3-3 cap provides the visible brass finish at the work surface.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | MQMM3ABR Mfr# MM3A-3 | 2" Desk Grommet Liner for 1-3/4" Hole, Polished Brass | ||||
Sold in: 1 Each | MQMM3ACH Mfr# MM3A-26 | 2" Desk Grommet Liner for 1-3/4" Hole, Polished Chrome | ||||
Sold in: 1 Each | MQMM3AEA Mfr# MM3A-10B | 2" Desk Grommet Liner for 1-7/8" Hole, English Antique | ||||
Sold in: 1 Each | MQMM3CH Mfr# MM3-26 | Round Wire Grommets, 1-7/8" Bore Hole Two Piece Solid Brass - Doug Mockett And Company, Inc. MM3-26 | ||||
Sold in: 1 Each | MQMM3EA Mfr# MM3-10B | 2" Desk Grommet Cap for 1-3/4" Hole, English Antique |