GROMMET CAP, BRIGHT CHROME For Clean Wire Pass-Throughs

GROMMET CAP, BRIGHT CHROME is a solid brass, hand machined grommet cap from Doug Mockett and Company, Inc. built for neat wire pass-through in desktop and work surface applications. The cap is designed for a 1-7/8 inch bore hole, so it seats into a standard cutout for this Mockett MM3 series and creates a defined, finished opening for cables. Because the cap is made from solid brass, it delivers a rigid, stable edge around the hole that stands up well in repeated daily use around office equipment cords. The bright chrome finish on the brass introduces a reflective, architectural look that ties into other bright chrome components in a workspace. This grommet cap sits 1/16 inch above the desktop, creating a low profile raised rim that clearly defines the opening while still staying out of the way of normal work on the surface.

Solid Brass Grommet Cap Details That Help Jobs Run Smoothly

• This round wire grommet cap is solid brass, hand machined, which gives a precise fit in the 1-7/8 inch bore hole and a consistent edge that keeps the opening clean around passing wires.
• The bright chrome finish on the brass presents a polished, reflective surface that visually matches other bright chrome hardware in offices or workstations, giving the cutout a coordinated, finished look.
• The cap sits 1/16 inch above the desktop, forming a slight lip that defines the cable opening and helps transition wiring cleanly from the desktop surface into the bore hole.
• The cap has a permanent cut out for wires, so cables always pass through the same shaped opening, helping maintain a repeatable layout for data and power cords on the work surface.
• The matching grommet liner and this grommet cap are sold separately, allowing selection of the specific bright chrome MM3-26 cap for projects that already use compatible liners or that need separate ordering by part.

Round Wire Grommet Cap Fit And Installation Use

This MM3-26 round wire grommet cap is sized for a 1-7/8 inch bore hole, so it drops into a properly sized opening in the desktop and aligns the cable pass-through to that cut. Because the cap sits 1/16 inch above the desktop, the installer can expect a subtle raised profile, which helps visually register the opening while keeping the surface practical for writing or equipment placement. The solid brass, hand machined construction means the outer and inner edges of the cap are accurately formed, which supports a snug, repeatable fit with the matching liner component on properly prepared worktops. With the permanent cut out for wires built into the cap, installers do not have to adjust or change inserts after fitment; the cable path is set by the cap opening and stays consistent from desk to desk.

How This Doug Mockett MM3-26 Grommet Works In Practice

Where This Round Wire Grommet Cap Performs Best

The Doug Mockett MM3-26 round wire grommet cap is designed as part of a grommet solution for desktops and similar work surfaces that use a 1-7/8 inch bore hole for wire routing. In office or workstation layouts, the solid brass body supports the surrounding edge of the cutout, so when cables move during use, the contact point is the machined brass rim instead of raw substrate. The bright chrome finish gives the cap a visual presence on laminate, veneer, or painted tops, tying into other bright chrome fittings in the space for a coordinated appearance. Because the cap sits 1/16 inch above the desktop, it creates a small perimeter that visually marks the wire exit point, which is helpful when positioning monitors, phones, and other devices relative to the opening. The permanent cut out for wires means every cable slips through the same defined opening, so rows of desks using this MM3-26 cap maintain a uniform cable pass-through pattern.

Details That Support Repeatable Cable Routing Results

The solid brass, hand machined construction of this grommet cap yields a uniform outside diameter and a clean inside edge around the cable cut out, which matters when repeating the same installation across multiple tops and expecting consistent results. The 1-7/8 inch bore hole requirement gives a clear drilling target, so every hole in a run of desks can be prepared to the same dimension for this MM3-26 cap. Once installed, the 1/16 inch projection above the desktop creates a controlled transition from horizontal surface to vertical drop, which helps keep cords from rubbing directly against the desk edge as they enter the hole. The permanent cut out for wires locks in the cable opening size and shape, reducing variation between stations and helping maintain a tidy line of cords exiting the surface. With grommet liner and grommet cap sold separately, projects can specify the bright chrome MM3-26 cap exactly where this finish and profile are required.

Common Questions About This Bright Chrome Wire Grommet Cap

Select This MM3-26 Bright Chrome Cap For Defined Wire Openings

The Doug Mockett MM3-26 solid brass grommet cap gives a bright chrome, hand machined finish around a 1-7/8 inch bore hole with a permanent cut out for wires. When a project calls for a controlled, repeatable wire pass-through and a cap that sits 1/16 inch above the desktop, this part delivers a consistent solution. Choose this grommet cap when the installation needs to coordinate with other bright chrome components and rely on a stable brass rim at every work surface opening.