
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware Eclipse pull is a 3 inch center to center cabinet handle designed for straightforward use on doors and drawers. The pull comes from the Eclipse collection, so its shape and detailing match that series for projects where visual consistency matters across a run of cabinets. The Chromulux finish gives the zinc die cast body a polished chrome look, supporting bright, reflective hardware lines on face frames or frameless fronts. With a total length of 4-1/4 inches, the pull spans enough surface to feel substantial in the hand while staying compact on smaller doors. A 1 inch projection creates useful finger clearance from the cabinet face, helping users get a secure grip without crowding adjacent hardware. The 1/2 inch width provides a balanced profile that reads clean on both narrow drawer fronts and wider doors. Center to center drilling at 3 inches ties directly to a common layout dimension used in cabinet shops.
The 3 inch center to center measurement fixes the drilling pattern, which simplifies layout when jigs or templates are already set for that size. A total length of 4-1/4 inches means the handle extends slightly beyond the hole spread at both ends, giving some visual margin around the mounting points on the door or drawer. With 1 inch projection, the handle stands off the surface enough to work comfortably with different door thicknesses. The 1/2 inch width defines how much rail space the pull occupies, which matters when planning clearances to adjacent hardware or edge profiles. These dimensions together help installers line up multiple pulls in straight runs and keep consistent reveals on a bank of fronts.
The P330-CLX pull is built as part of the Eclipse collection, so it suits cabinet runs where that series look is used across doors and drawers. Its 3 inch center to center drilling matches a widely used hardware spacing, which makes it suitable for both new installations and situations where an older 3 inch pull is being swapped to refresh finishes while reusing the same hole locations. The 4-1/4 inch overall length carries well on standard kitchen cabinet doors and medium-width drawers, keeping the handle visually proportionate to typical face sizes. A 1 inch projection and 1/2 inch width let the pull sit comfortably on fronts without competing with surrounding design details such as edge profiles or panel routing. The Chromulux finish pairs with chrome-toned hinges or fixtures, supporting a coordinated hardware package across the room.
The defined 3 inch center to center spacing directly supports repeatable drilling using common cabinet hardware jigs, which helps maintain alignment across a row of doors and reduces layout time on site or in the shop. Because the length is fixed at 4-1/4 inches, installers can predict how close the ends of the pull will sit to door edges, aiding decisions about placement relative to stiles or rail intersections. The 1 inch projection gives users predictable hand clearance, which matters when multiple fronts open near each other and when drawers sit below overhanging tops. With a 1/2 inch width, the pull presents a consistent visual line, so when several P330-CLX pulls are installed on stacked drawers, the hardware reads as an even band across the fronts. The zinc die cast construction, paired with the Chromulux finish, creates a solid-feeling handle with a reflective surface that helps tie together other chrome-finished components in the cabinet layout.
The Hickory Hardware Eclipse pull has a 3 inch center to center measurement, so hole drilling aligns with common cabinet hardware layouts using that spacing.
The P330-CLX pull has a total length of 4-1/4 inches, giving extra handle span beyond the 3 inch mounting holes for a fuller gripping area.
The Eclipse series P330-CLX pull projects 1 inch from the cabinet surface, providing finger clearance between the handle and the door or drawer face.
The P330-CLX pull is made from zinc die cast material, giving a solid metal body beneath the Chromulux chrome-style finish.
The Eclipse P330-CLX pull has a width of 1/2 inch, which sets the visible band of hardware across the cabinet front.
The P330-CLX cabinet pull is part of the Eclipse collection from Hickory Hardware, aligning it with other Eclipse series designs.
The Hickory Hardware Eclipse pull with 3 inch center to center drilling, 4-1/4 inch overall length, and 1 inch projection gives cabinet projects a defined set of working dimensions. The zinc die cast construction with Chromulux finish supports a chrome-style look under regular use on doors and drawers. When a project calls for Eclipse collection styling in a standard 3 inch spread, the P330-CLX pull offers a consistent option that aligns appearance and layout across multiple fronts.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BWP335-26 Mfr# P335-26 | Hickory Hardware Eclipse 3" (76 mm) Center to Center Polished Chrome Pull, P335-26 | ||||
Sold in: 1 Each | BWP413-VB Mfr# P413-VB | Hickory Hardware Eclipse Vintage Bronze 1-1/4" (32 mm) Diameter Knob, P413-VB | ||||
Sold in: 1 Each | BWP431-VB Mfr# P431-VB | Hickory Hardware Eclipse 3" (76 mm) Center to Center Vintage Bronze Pull, P431-VB | ||||
Sold in: 1 Each | BWP135-VB Mfr# P135-VB | Hickory Hardware Eclipse 3" (76 mm) Center to Center Vintage Bronze Pull, P135-VB | ||||
Sold in: 1 Each | BWP14114-VB Mfr# P14114-VB | Hickory Hardware Eclipse 3" (76 mm) Center to Center Vintage Bronze Pull, P14114-VB | ||||
Sold in: 1 Each | BWP208-26 Mfr# P208-26 | Hickory Hardware Eclipse Chrome 1-7/16" (37 mm) L x 3/4" (19 mm) W Knob, P208-26 | ||||
Sold in: 1 Each | BWP330-VB Mfr# P330-VB | Hickory Hardware Eclipse 3" (76 mm) Center to Center Vintage Bronze Pull, P330-VB |