Hickory Hardware Eclipse 3" (76 mm) Center to Center Chrome Pull, P335-CLX

Hickory Hardware Eclipse Pull For Cabinets

Hickory Hardware Eclipse Series pull gives you a 3 inch center to center chrome handle sized for common cabinet layouts, so it fits typical door and drawer boring while keeping a consistent look across the run.

The pull is part of the Eclipse collection, so its shape and lines coordinate with other Eclipse pieces when a project calls for a unified hardware style on face frames or frameless cabinetry.

Its Chromulux finish creates a bright chrome appearance that reads clean on painted, stained, or laminate fronts, so the same part number P335-CLX works across mixed-material jobs in a room.

The pull body is zinc die cast, giving a solid, dense feel in hand that helps doors and drawers open positively while also supporting a consistent profile at every mounting point.

With a 4 inch overall length and 1/2 inch width, the pull spans the stile without crowding edges, so you gain enough finger clearance while keeping hardware visually proportional on standard cabinet fronts.

A 1 inch projection stands the grip off the surface just enough for a safe handhold, which helps when users approach from different angles in tight kitchen or bath layouts.

Key Eclipse Pull Details For Cabinet Projects

• The 3 inch (76 mm) center to center drilling matches a widely used cabinet boring pattern, so it suits replacements or new layouts based on standard jig spacing in shops.
• The Chrome Chromulux finish provides a bright, reflective surface that pairs with other chrome elements, so hardware alignment supports a coordinated kitchen or bath design.
• Zinc die cast construction forms the pull as a single, solid part, so each installation point gets consistent dimensions along the run of doors and drawers.
• The 4 inch overall length covers the grip area comfortably on most cabinet fronts, so users can grab the handle without fingers pushing against the door edge.
• The 1 inch projection creates space between the pull and the cabinet face, so hands clear the surface and reduce contact marks on painted or stained finishes during daily use.
• The 1/2 inch width balances visual weight and finger contact, so it looks proportional on narrow rails while still giving a defined gripping surface.

Cabinet Pull Fit, Boring Pattern, And Handling

The 3 inch center to center boring on this Belwith Keeler pull aligns the screw holes along a straight 76 mm span, so it meets the common template settings used on cabinet doors and drawer fronts in many shops.

A 4 inch total length means the pull extends slightly beyond the hole pattern on each side, so the handle visually frames the boring without interfering with stile edges or neighboring hardware positions.

The 1 inch projection defines how far the Eclipse Series pull stands off the face, so fingers wrap behind the bar rather than scraping across the cabinet surface when operated from above or below.

With a 1/2 inch width across the grip, the Chromulux pull provides a narrow yet tangible edge to hook, which helps users get leverage on heavier drawers while keeping a slim profile on small doors.

Using a zinc die cast body keeps all P335-CLX pulls dimensionally consistent from piece to piece, so jig setups and repeated drilling locations produce uniform reveals across the whole install.

Using The Eclipse Chromulux Pull In Real Jobs

Where This Chromulux Cabinet Pull Works Best

This Hickory Hardware Eclipse Series pull is designed as a cabinet handle with a 3 inch center to center drilling, so it suits cabinet doors and drawers laid out around that widely used spacing in kitchens, baths, and casework.

The Chromulux chrome finish pairs naturally with other chrome hardware, so it fits projects where hinges, faucets, and fixtures already favor bright metal surfaces across the room.

Its 4 inch length and 1/2 inch width keep the pull appropriately scaled for standard cabinet fronts, so it works on both upper doors and base drawers without overwhelming narrow rails.

A 1 inch projection creates a stand-off that supports comfortable gripping on wall cabinets and tall pantry doors, so users can pull from different angles without fingers sliding along the door face.

The zinc die cast construction and consistent Belwith Keeler Eclipse collection identity make this part suitable when a project needs multiple matching pulls under the same P335-CLX number across several cabinets.

Why Dimensions And Material Support Consistent Results

The 3 inch center to center measurement on the Eclipse collection pull simplifies layout because jigs and drilling guides often index on that spacing, so installers can repeat hole locations quickly from cabinet to cabinet.

With 4 inch overall length, the pull extends just past the boring, which helps visually balance the handle on typical door widths and keeps the grip located near the stile centerline.

The 1/2 inch width sets a defined gripping edge while staying visually light, so it provides a solid handhold without dominating the face of narrower drawers or small doors.

A 1 inch projection ensures the Chromulux pull lifts off the cabinet face enough for knuckles to clear, so daily operation reduces contact with painted or stained finishes during opening and closing.

The zinc die cast material allows the manufacturer to form precise details in the Eclipse profile, so every P335-CLX pull maintains the same feel and alignment when installed in rows or banks.

The chrome-like Chromulux finish sits on this zinc die cast base, so the hardware presents a uniform appearance across multiple doors and drawers, supporting a consistent design line through the job.

Buyer Questions About Eclipse Chromulux Cabinet Pull

Selecting This Eclipse Pull For Your Next Job

The Hickory Hardware Eclipse Series pull with 3 inch center to center boring, Chromulux chrome finish, and zinc die cast construction offers a defined hardware solution for cabinet doors and drawers built around that standard drilling pattern.

With its 4 inch overall length, 1/2 inch width, and 1 inch projection, the P335-CLX pull from Belwith Keeler provides a compact handle that supports everyday cabinet use while presenting a consistent look across multiple fronts.

For projects that call for bright chrome hardware in the Eclipse collection, this cabinet pull gives a repeatable, cataloged option under a single part number for both replacements and new installations.