Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3M 340D 100 Grit 3 x 24 Sanding Belt is a general purpose portable sanding belt that uses aluminum oxide on X-weight cloth, so it delivers consistent cutting action while standing up to industrial sanding pressure. The 340D version is an open coat belt, which spaces the abrasive grain to provide a good cut with less loading during use. The 3 inch by 24 inch size fits many portable belt sanders, giving you a familiar format for everyday stock removal and surface prep. The 100 grit rating places this belt in the medium-cut range, so it balances material removal and surface finish for common shop tasks. As part of the 3M 340D and 341D belt family, it is positioned as an excellent all-around abrasive belt for everyday use in woodworking or similar industrial environments.
The 3 inch by 24 inch dimensions place this 3M 340D belt in a common portable sander format, which simplifies matching the belt to existing tools on the job or in the shop. Because it is a general purpose portable sanding belt, it suits routine belt sanding passes where predictable, repeatable performance is more important than extreme aggressiveness or ultra-fine finishing. The aluminum oxide on X-weight cloth construction gives the belt enough backing stiffness to track properly over drive and idler rollers, supporting stable contact at the work surface. With its 100 grit, medium-cut abrasive face, this belt supports workflows where a single grit must both remove material and prepare surfaces for further sanding steps with finer belts.
This 3M 340D and 341D general purpose portable sanding belt line is presented as an excellent all-around abrasive belt for everyday use, so it fits routine sanding stations handling varied work. The 3 inch by 24 inch size focuses this specific belt on portable sanders, allowing operators to move across panels, edges, or components rather than bringing pieces to a fixed machine. Aluminum oxide on X-weight cloth supports industrial and occupational sanding environments, where belts are expected to withstand continuous motion and repeated loading without abruptly failing. The open coat 340D structure is designed to provide a good cut with less loading, which is especially useful on materials or operations that tend to generate dust that would otherwise clog the abrasive surface. With 100 grit, this belt suits situations where a single belt must level surfaces while still leaving a moderately refined scratch pattern. Within the broader 340D range of 50 to 120 grit, 100 grit sits toward the finer end of the series, so it complements coarser 340D grits already used for heavier stock removal.
The aluminum oxide abrasive on X-weight cloth gives this belt a balance of cutting ability and backing strength, which helps it stay flat on the platen or contact roller and maintain even pressure across the sanding path. That construction contributes to uniform scratch patterns that are easier to blend with subsequent sanding steps. The open coat 340D configuration spaces the abrasive grains so swarf can clear more readily from between particles, reducing loading that can otherwise cause burnishing or streaking on the work surface. The 3 inch width provides a coverage area that can bridge joints and uneven spots in fewer passes, while the 24 inch circumference suits belt sanders designed around that loop length. Because the 340D series is described as an excellent all-around abrasive belt for everyday use, these construction choices support repeatable day-to-day sanding rather than occasional specialty tasks. The defined 340D grit range from 50 to 120 grit also signals that 100 grit sits within a structured system, so operators can coordinate this belt with coarser or finer 340D belts when planning multi-step sanding sequences.
The 3M 340D 100 grit belt uses aluminum oxide on X-weight cloth, so it delivers a consistent cut while the backing supports stable tracking in portable sanders.
The 3M 340D open coat design spaces abrasive grains to provide a good cut with less loading, helping the belt stay effective during longer sanding passes.
The 100 grit rating places this belt in a medium-cut range, so it can remove stock and leave a surface prepared for follow-up sanding with finer grits.
This 3 inch by 24 inch belt is sized for portable sanding, so it suits portable belt sanders designed around a 3 x 24 loop length.
The 3M 340D and 341D belts are described as excellent all-around abrasive belts for everyday use, so this 340D 100 grit version fits routine sanding tasks.
Within the 340D range of 50 to 120 grit, 100 grit lies toward the finer end, which positions it between heavier stock removal and finer finishing steps.
This 3M 340D 100 Grit 3 inch x 24 inch portable sanding belt combines aluminum oxide on X-weight cloth with an open coat design to provide a good cut with less loading during everyday use. The medium 100 grit face supports workflows that need one belt to both remove material and leave a surface ready for finer steps. For industrial and occupational users who want an excellent all-around abrasive belt within a defined grit range, this 3M 340D option aligns well with common portable sanding stations.
Sold In: 10 Belt
