Hughes Supply 5 mm Clear Plastic L-Shaped Shelf Supports (Bulk), H-0802-CLR/M

5 mm Clear L-Shaped Shelf Supports For Cabinet Runs

5 mm clear plastic L-shaped shelf supports from Hughes Supply provide a compact way to support adjustable shelves in cabinet, closet, and garage storage projects. The shelf rest area measures 1/2 inch long by 9/16 inch wide, so each support presents a defined bearing surface under the shelf edge, which helps distribute load over a small but consistent footprint. The clear plastic construction keeps the support visually low-profile against most interiors, which helps finished work look cleaner around open shelf lines. A 3/16 inch bore on the support accepts the shelf edge at a controlled depth, which helps locate and stabilize the shelf on the L-shaped rest. The non-fluted 3/8 inch long stem fits into a 5 mm system hole, so the support seats on smooth stem walls rather than barbs, which matters when repositioning shelves in line-bored cabinet sides.

Key Details That Support Everyday Shelf Work

• The 5 mm stem size aligns with common European cabinet system holes, so these supports drop into standard line-bored gables and simplify layout on new or existing casework.
• The clear plastic material keeps the support less noticeable around shelf fronts, which helps finished cabinets, closets, and garage storage look less cluttered along adjustable shelf rows.
• The L-shaped design with a defined shelf rest area provides a positive ledge under the shelf, which supports vertical load better than point contact when shelves carry typical household or shop items.
• The shelf rest area sized at 1/2 inch long by 9/16 inch wide gives a predictable contact patch, which helps installers align front edges consistently across multiple supports on the same shelf.
• The non-fluted 3/8 inch long stem slides in and out of 5 mm holes without cutting grooves, which matters when shelves are adjusted frequently and cabinet sides need to stay smooth.

Stem And Shelf Rest Geometry For Clean Fit

The non-fluted 3/8 inch long stem on these Hughes Supply supports engages the cabinet side over a short, smooth length, which helps the part seat firmly without chewing into the hole walls. That stem length keeps the support centered in 5 mm system holes while still allowing easy removal when shelf layout changes. The shelf rest area measuring 1/2 inch long by 9/16 inch wide sets a flat platform beneath the shelf edge, which helps prevent localized denting on common shelf materials in everyday use. A 3/16 inch bore at the rest area receives the shelf edge or mating feature to a controlled depth, which helps hold shelf placement repeatably along a run of cabinets.

How These H-0802-CLR/M Supports Work On The Job

Where Hughes Supply Shelf Supports Fit Best

Hughes Supply 5 mm clear plastic L-shaped shelf supports H-0802-CLR/M belong in cabinets, closets, and garage organization projects that rely on 5 mm system holes for adjustable shelving. The clear plastic body blends into typical light-colored cabinet interiors, which supports a cleaner presentation in residential or light commercial spaces. The defined shelf rest area of 1/2 inch by 9/16 inch lets installers rely on a known support footprint when spreading load across four or more supports under a shelf panel. The non-fluted 3/8 inch long stem works with standard boring patterns, so casework built around 5 mm hardware can use these supports without changing drilling programs.

Details That Help Repeatable Shelf Alignment

The 5 mm stem size on these 5 mm clear plastic L-shaped shelf supports ties directly to common line-bore tooling, which helps maintain consistent shelf elevation from cabinet to cabinet. Because the stem is non-fluted, the support can be repositioned in the same hole without shaving material, which keeps hole geometry more consistent over multiple adjustments. The 3/16 inch bore in the shelf rest area establishes a repeatable reference for the shelf edge, which reduces small shifts that can telegraph as uneven gaps at doors or face frames. The 1/2 inch by 9/16 inch shelf rest area provides enough flat bearing surface to support typical loads while still staying compact, which helps installers keep clearance near cabinet sides and vertical partitions. Used across a run, these H-0802-CLR/M supports give a uniform bearing point under every shelf position, which supports repeatable layout and alignment during both initial setup and later reconfiguration.

Common Questions About 5 mm Clear Shelf Supports

Select Hughes Supply H-0802-CLR/M For 5 mm Systems

Hughes Supply 5 mm clear plastic L-shaped shelf supports H-0802-CLR/M offer a defined shelf rest area, a 3/16 inch bore, and a non-fluted 3/8 inch long stem sized for 5 mm holes. For cabinet, closet, and garage storage using 5 mm system boring, these details give a straightforward way to support and align adjustable shelves with repeatable results. Choose this part when the project calls for a clear, low-profile support that works within standard 5 mm shelf hardware layouts from Wurth Baer Supply.